Having been somewhat stoked by the ease with which 1.4.1 can be diskless'd
onto an iMac, I tried building -current (supped on 19991018 with -o -d).

The new kernel is not happy. The console keyboard is unresponsive. While I
can login over the network just fine, I don't want to risk a make build
until the kernel is in better shape than this. new dmesg:

NetBSD 1.4L (GENERIC) #0: Tue Oct 19 06:15:27 PDT 1999
    toddpw@leia.toddpw.net:/usr/src/sys/arch/macppc/compile/GENERIC
CPU: 750 (Revision 202)
total memory = 32768 KB
avail memory = 25372 KB
using 435 buffers containing 1740 KB of memory
mainbus0 (root)
cpu0 at mainbus0: 512KB backside cache enabled
pci0 at mainbus0 bus 0
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: Motorola MPC106 Host-PCI Bridge (grackle) (rev. 0x40)
obio0 at pci0 dev 16 function 0: addr 0x80800000
interrupt-controller at obio0 offset 0x10 not configured
scsi at obio0 offset 0x10000 not configured
escc-legacy at obio0 offset 0x12000 not configured
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
davbus at obio0 offset 0x14000 not configured
fdc at obio0 offset 0x15000 not configured
adb0 at obio0 offset 0x16000 irq 18: 0 targets
aed0 at adb0 addr 0: ADB Event device
wdc0 at obio0 offset 0x20000 irq 13
wd0 at wdc0 channel 0 drive 0: <WDC AC26400R>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 6149MB, 13328 cyl, 15 head, 63 sec, 512 bytes/sect x 12594960 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wdc1 at obio0 offset 0x21000 irq 14
atapibus0 at wdc1 channel 0
cd0 at atapibus0 drive 0: <MATSHITA CR-175, , 5ADF> type 5 cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
bm0 at obio0 offset 0x11000 irq 42,33: address 00:50:e4:ce:9b:06
nvram0 at obio0 offset 0x60000
ofb0 at pci0 dev 18 function 0: ATI Technologies Mach64 B
ofb0: 1024 x 768, 8bpp
wsdisplay0 at ofb0: console (std, vt100 emulation)
ohci0 at pci0 dev 20 function 0: AT&T Microelectronics USB Host Controller (rev. 0x12)
ohci0: interrupting at irq 28
ohci0: OHCI version 1.0
usb0 at ohci0
uhub0 at usb0
uhub0: AT&T Microelect OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port error, restarting port 1
SPLUSBCHECK failed 0x0!=0x30000130, ../../../../dev/usb/ohci.c:1339
uhub1 at uhub0 port 1
uhub1: Alps Electric Hub in Apple USB Keyboard, class 9/0, rev 1.10/2.10, addr 2
uhub1: 3 ports with 2 removable, bus powered
ukbd0 at uhub1 port 1 configuration 1 interface 0
ukbd0: Alps Electric Apple USB Keyboard, rev 1.10/1.02, addr 3, iclass 3/1
wskbd1 at ukbd0 mux 1
ums0 at uhub1 port 2 configuration 1 interface 0
ums0: Logitech M4848, rev 1.00/5.00, addr 4, iclass 3/1
ums0: 1 buttons
wsmouse1 at ums0 mux 0
uhub0: port error, restarting port 2
ugen0 at uhub0 port 2
ugen0: Connectix Corp. QuickCam, rev 1.00/1.00, addr 5
boot device: bm0
nfs_boot: trying DHCP/BOOTP
nfs_boot: BOOTP server: 10.0.0.1
nfs_boot: my_addr=10.0.9.0
nfs_boot: my_mask=255.0.0.0
root on uni.wrs.com:/data/export/leia/root/
root file system type: nfs
uhub1: at uhub0 port 1 (addr 2) disconnected
ukbd0: at uhub1 port 1 (addr 3) disconnected
wskbd1 detached
ukbd0 detached
ums0: at uhub1 port 2 (addr 4) disconnected
wsmouse1 detached
ums0 detached
uhub1 detached
uhub1 at uhub0 port 1
uhub1: Alps Electric Hub in Apple USB Keyboard, class 9/0, rev 1.10/2.10, addr 2
uhub1: 3 ports with 2 removable, bus powered
ukbd0 at uhub1 port 1 configuration 1 interface 0
ukbd0: Alps Electric Apple USB Keyboard, rev 1.10/1.02, addr 3, iclass 3/1
wskbd1 at ukbd0 mux 1
ums0 at uhub1 port 2 configuration 1 interface 0
ums0: Logitech M4848, rev 1.00/5.00, addr 4, iclass 3/1
ums0: 1 buttons
wsmouse1 at ums0 mux 0
ugen0: at uhub0 port 2 (addr 5) disconnected
ugen0 detached
ugen0 at uhub0 port 2
ugen0: Connectix Corp. QuickCam, rev 1.00/1.00, addr 5

# eof

Todd Whitesel
toddpw @ best.com