I'm trying to get CardBus working on my Sony VAIO F270, but not having
much luck.  It appears as though it's finding the controller, but not
using it because of "intr unconfig."  I know that if I don't enable
cardbus support in the kernel, it does properly find the Ricoh
controller but not configure it.

Am I missing something obvious here?

Thanks...

        --Jerry

name:  Jerry Alexandratos         ||  Open-Source software isn't a
phone: 302.593.4322               ||  matter of life or death...
email: darkstar@udel.edu          ||  ...It's much more important
                                  ||  than that!

Here's output from dmesg:

NetBSD 1.4L (HELLBOY) #1: Sat Oct 23 18:32:02 EDT 1999
    jalexand@hellboy:/usr/src/sys/arch/i386/compile/HELLBOY
cpu0: family 6 model 6 step a
cpu0: Intel Pentium II (Celeron) (686-class)
total memory = 127 MB
avail memory = 116 MB
using 1658 buffers containing 6632 KB of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (AGP disabled) (rev. 0x03)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IBM-DBCA-206480>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 6194MB, 13424 cyl, 15 head, 63 sec, 512 bytes/sect x 12685680 sectors
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-C2202, 6900502511, 1019> type 5 cdrom removable
cd0: 32-bits data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
Intel 82371AB USB Host Controller (PIIX4) (USB serial bus, revision 0x01) at pci0 dev 7 function 2 not configured
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
vga1 at pci0 dev 8 function 0: Neomagic MagicMedia 256AV VGA (rev. 0x20)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-3 added (80x25, vt100 emulation)
Neomagic MagicMedia 256AV Audio (audio multimedia, revision 0x20) at pci0 dev 8 function 1 not configured
Sony CXD1947A FireWire Host Controller (Firewire serial bus, revision 0x01) at pci0 dev 9 function 0 not configured
cbb0 at pci0 dev 10 function 0 (RF5C478), chipflags 2
 Do not use cbb0 because of intr unconfig.
cbb1 at pci0 dev 10 function 1 (RF5C478), chipflags 2
 Do not use cbb1 because of intr unconfig.
Rockwell Semiconductor Systems product 0x2005 (miscellaneous communications, revision 0x01) at pci0 dev 11 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 3
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia0: CIS version PCMCIA 2.0 or 2.1
pcmcia0: CIS info: 3Com Corporation, 3C589D, TP/BNC LAN Card Ver. 2a, 000002
pcmcia0: Manufacturer code 0x101, product 0x589
pcmcia0: function 0: network adapter, ccr addr 10000 mask 3
pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0; rdybsy_active wp_active bvd_active io8 io16 irqlevel
pcmcia0: function 0, config table entry 3: I/O card; irq mask ffff; iomask 4, iospace 0; rdybsy_active wp_active bvd_active io8 io16 irqlevel
ep0 at pcmcia0 function 0 port 0x330-0x33f: 3Com 3c589 10Mbps Ethernet
ep0: address 00:10:4b:a0:f1:25, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT, 10base5, 10base2 (default 10baseT)
pcmcia1 at pcic0 controller 0 socket 1
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
apm0: battery life expectancy: 100%
apm0: A/C state: on
apm0: battery charge state: high charging
apm0: estimated 6h 0m
biomask c040 netmask c040 ttymask d0ca
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs