After removing all USB-support and SCSI-support (via PCMCIA)...

Here is the output of "dmesg".

<CUT>

NetBSD 1.5_ALPHA (ivarhs180700-cardbus-test) #0: Tue Jul 18 21:54:19 CEST
2000

root@test.pasta.cs.uit.no:/usr/cvs/src/sys/arch/i386/compile/ivarhs180700-cardbus-test
cpu0: family 5 model 8 step 1
cpu0: Intel Pentium/MMX (Tillamook) (586-class)
total memory = 32384 KB
avail memory = 26896 KB
using 430 buffers containing 1720 KB of memory
BIOS32 rev. 0 found at 0xfd801
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82439TX System Controller (MTXC) (rev. 0x01)
pcib0 at pci0 dev 1 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x01)
pciide0 at pci0 dev 1 function 1: Intel 82371AB IDE controller
(PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IBM-DTCA-24090>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 3909 MB, 7944 cyl, 16 head, 63 sec, 512 bytes/sect x 8007552 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <CD-ROM  CDR_U200, , 1.08> type 5 cdrom
removable
cd0: 32-bit data port
cd0: drive supports PIO mode 3, DMA mode 1
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 0, DMA mode 1 (using DMA data transfers)
Intel 82371AB USB Host Controller (PIIX4) (USB serial bus, revision
0x01) at pci0 dev 1 function 2 not configured
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge,
revision 0x01) at pci0 dev 1 function 3 not configured
vga0 at pci0 dev 2 function 0: Neomagic MagicGraph 128XD (rev. 0x00)
wsdisplay0 at vga0: console (80x25, vt100 emulation)

------- HERE 

cbb0 at pci0 dev 4 function 0: Texas Instruments PCI1131 PCI-CardBus
Bridge (rev. 0x01)
cbb0: NOT USED because of unconfigured interrupt
cbb1 at pci0 dev 4 function 1: Texas Instruments PCI1131 PCI-CardBus
Bridge (rev. 0x01)
cbb1: NOT USED because of unconfigured interrupt

------- HERE

isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0
lpt0 at isa0 port 0x378-0x37b irq 7
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.02
audio0 at sb0: half duplex, mmap, independent
midi0 at sb0: SB MIDI UART
opl0 at sb0: model OPL3
midi at opl0 not configured
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
apm0 at mainbus0: Power Management spec V1.2
biomask ef4d netmask ef4d ttymask ffcf
pcic0: controller 0 detecting irqs with mask 0xdeb8:..9..10..11
pcic0: using irq 9 for socket events
IPsec: Initialized Security Association Processing.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
pcic_chip_socket_enable: status cpcic_wait_ready: ready never happened,
status = 0c
</CUT>