From:  Jason R Thorpe <thorpej@zembu.com>
	Date:  Tue, 9 Jan 2001 17:27:11 -0800

>  > Thats problem 1 and 2 taken care of.  Anyone got suggestions for 3 and 4?
> 
> I just committed a change to arch/i386/isa/isa_machdep.c that should
> get you past the interrupt conflict between your on-board Ethernet
> and the second PCI IDE channel.

With that change and the previous patches we seem to have dealt with all the 
problems.  Thanks to everyone for the help.

Here is the current output in msgbuf:

NetBSD 1.5Q (INSTALL) #1: Wed Jan 10 17:11:43 NZDT 2001
    mark@turakirae.mcs.vuw.ac.nz:/src/build/syssrc/sys/arch/i386/compile/INSTALL
cpu0: Intel Pentium III (Coppermine) (686-class), 864.04 MHz
cpu0: I-cache 16K 32b/line 4-way, D-cache 16K 32b/line 2/4-way
cpu0: L2 cache 256K 32b/line 8-way
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX,FXSR,XMM>
total memory = 127 MB
avail memory = 113 MB
using 1658 buffers containing 6632 KB of memory
BIOS32 rev. 0 found at 0xf0000
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1166 product 0x0009 (rev. 0x05)
pchb1 at pci0 dev 0 function 1
pchb1: vendor 0x1166 product 0x0009 (rev. 0x05)
pci1 at pchb1 bus 3
pci1: i/o space, memory space enabled
cac0 at pci1 dev 3 function 0: Compaq Smart Array 431
cac0: interrupting at irq 10
ZZZ: 0xca7b7000 CCB submitted
ZZZ: 0xca7b7000 CCB completed
ld0 at cac0 unit 0ZZZ: 0xca7b7000 CCB submitted
ZZZ: 0xca7b7000 CCB completed
: RAID5 array
ld0: 52079 MB, 13071 cyl, 255 head, 32 sec, 512 bytes/sect x 106659360 sectors
siop0 at pci0 dev 1 function 0: Symbios Logic 53c1510d (ultra2-wide scsi)
siop0: using on-board RAM
siop0: interrupting at irq 11
scsibus0 at siop0: 16 targets, 8 luns per target
siop1 at pci0 dev 1 function 1: Symbios Logic 53c1510d (ultra2-wide scsi)
siop1: using on-board RAM
siop1: interrupting at irq 10
scsibus1 at siop1: 16 targets, 8 luns per target
fxp0 at pci0 dev 2 function 0: Intel i82557 Ethernet, rev 8
fxp0: interrupting at irq 15
fxp0: Ethernet address 00:02:a5:07:d8:5f, 10/100 Mb/s
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vendor 0x1002 product 0x4756 (VGA display, revision 0x7a) at pci0 dev 3 function 0 not configured
vendor 0x0e11 product 0xa0f0 (miscellaneous system) at pci0 dev 4 function 0 not configured
fxp1 at pci0 dev 5 function 0: Intel i82557 Ethernet, rev 8
fxp1: interrupting at irq 5
fxp1: Ethernet address 00:50:8b:b8:d8:60, 10/100 Mb/s
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 15 function 0
pcib0: vendor 0x1166 product 0x0200 (rev. 0x4f)
pciide0 at pci0 dev 15 function 1: vendor 0x1166 product 0x0211 (rev. 0x00)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to compatibility mode
pciide0: primary channel interrupting at irq 14
atapibus0 at pciide0 channel 0
cd0 at atapibus0 drive 0: <COMPAQ  CDR-8435, , 0013> type 5 cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel configured to compatibility mode
pciide0: no compatibility interrupt for use by secondary channel
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask 7fc5 netmask ffe5 ttymask ffe7
scsibus0: waiting 2 seconds for devices to settle...
siop0: target 6 using 8bit transfers
siop0: target 6 now synchronous at 10.0Mhz, offset 15
st0 at scsibus0 target 6 lun 0: <COMPAQ, DLT8000, 011A> SCSI2 1/sequential removable
st0: siop0: target 6 using 16bit transfers
siop0: target 6 now synchronous at 10.0Mhz, offset 15
drive empty
scsibus1: waiting 2 seconds for devices to settle...
md0: internal 2048K image area
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs


cheers
mark