--/9DWx/yDrRhgMJTb
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

MPACPI option makes my system reboot trying to enable ioapic.  I've
attached dmesg outputs from the working kernel and from the kernel
with options MPACPI ACPI_MADT_DEBUG and MPVERBOSE set which fails.

The system is 2 x P4 Xeon @1.6GHz (HT enabled) with E7500 chipset.

--Artem

Here's config file I used:
================================================================
include "arch/i386/conf/GENERIC"

options         MULTIPROCESSOR
options         COM_MPLOCK      # com MP locking; REQUIRED on MP i386

options         APM_NO_IDLE
#options        DIAGNOSTIC      # STRONGLY RECOMMENDED
#options        LOCKDEBUG
#options        MPDEBUG
#options        MPVERBOSE
#options        DEBUG
options         MPBIOS          # configure CPUs and APICs using MPBIOS
options         MPACPI          # configure CPUs and APICs using ACPI
                                # (acpi at mainbus must also be enable)

acpi0          at mainbus0
ioapic*         at mainbus? apid ?

#options        ACPI_PCI_FIXUP=1        # PCI interrupt routing via ACPI
#options        ACPI_ACTIVATE_DEV=0     # If set, activate inactive devices
options ACPI_MADT_DEBUG
options MPVERBOSE
================================================================

On Wed, Jan 08, 2003 at 01:33:49PM +0100, Frank van der Linden <fvdl@wasabisystems.com> wrote:
> One more thing about this.. if the MPACPI option fails to work properly
> for you, and you're able to send a dmesg, please include the
> ACPI_MADT_DEBUG and MPVERBOSE options, so that a lot of info is included
> about interrupt routing.
> 
> Thanks,
> 
> - Frank
> 

--/9DWx/yDrRhgMJTb
Content-Type: text/plain; charset=us-ascii
Content-Description: smp-mpapic-verbose-fails
Content-Disposition: attachment; filename="smp-mpapic-verbose.txt"

booting hd0a:netbsd-new (howto 0x2)
5978340+128620+308880 [344448+295315]=0x6bc1fc
kenter: 0x00002000
acpi: wakecode is installed at 0x2000, size=336
[ using 640256 bytes of netbsd ELF symbol table ]
BIOS CFG: Model-SubM-Rev: fc-01-00, 0x70<KBDINT,RTC,IC2>
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6L (GENERIC.MP) #1: Wed Jan  8 12:28:46 PST 2003
    root@super:/usr/src/sys/arch/i386/compile/GENERIC.MP
total memory = 511 MB
avail memory = 467 MB
using 6144 buffers containing 26292 KB of memory
BIOS32 rev. 0 found at 0xfb3c0
mainbus0 (root)
mainbus0: scanning 0x99400 to 0x997f0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xf4fb0
mainbus0: MP config table at 0xf1400, 460 bytes long
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Pentium 4 (686-class), 1599.90 MHz, id 0xf27
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu0: L2 cache 512 KB 64b/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: calibrating local timer
cpu0: apic clock running at 99 MHz
cpu0: 16 page colors
cpu0: kstack at 0xe2b74000 for 16384 bytes
cpu0: idle pcb at 0xe2b74000, idle sp at 0xe2b77f98
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel Pentium 4 (686-class), 1599.82 MHz, id 0xf27
cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu1: L2 cache 512 KB 64b/line 8-way
cpu1: ITLB 4K/4M: 64 entries
cpu1: DTLB 4K/4M: 64 entries
cpu1: kstack at 0xe2b80000 for 16384 bytes
cpu1: idle pcb at 0xe2b80000, idle sp at 0xe2b83f98
cpu2 at mainbus0: apid 2 (application processor)
cpu2: starting
cpu2: Intel Pentium 4 (686-class), 1599.83 MHz, id 0xf27
cpu2: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu2: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu2: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu2: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu2: L2 cache 512 KB 64b/line 8-way
cpu2: ITLB 4K/4M: 64 entries
cpu2: DTLB 4K/4M: 64 entries
cpu2: kstack at 0xe2b9c000 for 16384 bytes
cpu2: idle pcb at 0xe2b9c000, idle sp at 0xe2b9ff98
cpu3 at mainbus0: apid 3 (application processor)
cpu3: starting
cpu3: Intel Pentium 4 (686-class), 1599.83 MHz, id 0xf27
cpu3: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu3: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu3: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu3: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu3: L2 cache 512 KB 64b/line 8-way
cpu3: ITLB 4K/4M: 64 entries
cpu3: DTLB 4K/4M: 64 entries
cpu3: kstack at 0xe2bb8000 for 16384 bytes
cpu3: idle pcb at 0xe2bb8000, idle sp at 0xe2bbbf98
ioapic0 at mainbus0 apid 4 (I/O APIC)
ioapic0: pa 0xfec00000, virtual wire mode, version 20, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 4
ioapic1 at mainbus0 apid 5 (I/O APIC)
ioapic1: pa 0xfec80000, virtual wire mode, version 20, 24 pins
ioapic2 at mainbus0 apid 6 (I/O APIC)
ioapic2: pa 0xfec80400, virtual wire mode, version 20, 24 pins
ioapic3 at mainbus0 apid 7 (I/O APIC)
ioapic3: pa 0xfec81000, virtual wire mode, version 20, 24 pins
ioapic4 at mainbus0 apid 8 (I/O APIC)
ioapic4: pa 0xfec81400, virtual wire mode, version 20, 24 pins
ioapic5 at mainbus0 apid 9 (I/O APIC)
ioapic5: pa 0xfec82000, virtual wire mode, version 20, 24 pins
ioapic6 at mainbus0 apid 10 (I/O APIC)
ioapic6: pa 0xfec82400, virtual wire mode, version 20, 24 pins
acpi0 at mainbus0
acpi0: SCI interrupting at irq 9
acpi0: fixed-feature power button present
mpacpi: found 8 PCI busses, max bus # is 7
ioapic6: int2 attached to isa0 irq 0 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic6: int1 attached to isa0 irq 1 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic6: int3 attached to isa0 irq 3 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic6: int4 attached to isa0 irq 4 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic6: int5 attached to isa0 irq 5 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic6: int6 attached to isa0 irq 6 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic6: int7 attached to isa0 irq 7 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic6: int8 attached to isa0 irq 8 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic6: int9 attached to isa0 irq 9 (type 0<type=0> flags d<pol=1=Act Hi,trig=3=Level>)
ioapic6: int10 attached to isa0 irq 10 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic6: int11 attached to isa0 irq 11 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic6: int12 attached to isa0 irq 12 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic6: int13 attached to isa0 irq 13 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic6: int14 attached to isa0 irq 14 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic6: int15 attached to isa0 irq 15 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
local apic: int1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: int1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: int1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: int1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
ioapic6: int16 attached to pci0 device 30 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int17 attached to pci0 device 30 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int18 attached to pci0 device 30 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int19 attached to pci0 device 30 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int16 attached to pci0 device 2 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int17 attached to pci0 device 2 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int18 attached to pci0 device 2 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int19 attached to pci0 device 2 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int16 attached to pci0 device 3 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int17 attached to pci0 device 3 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int18 attached to pci0 device 3 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int19 attached to pci0 device 3 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int16 attached to pci0 device 31 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int18 attached to pci0 device 31 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int17 attached to pci0 device 31 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int16 attached to pci0 device 29 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int19 attached to pci0 device 29 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int18 attached to pci0 device 29 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int23 attached to pci0 device 29 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int20 attached to pci1 device 8 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int21 attached to pci1 device 8 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int22 attached to pci1 device 8 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int23 attached to pci1 device 8 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int19 attached to pci1 device 7 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int16 attached to pci1 device 7 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int17 attached to pci1 device 7 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int18 attached to pci1 device 7 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int20 attached to pci1 device 4 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int21 attached to pci1 device 4 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int22 attached to pci1 device 4 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int23 attached to pci1 device 4 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int21 attached to pci1 device 5 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int22 attached to pci1 device 5 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int23 attached to pci1 device 5 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int20 attached to pci1 device 5 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int22 attached to pci1 device 6 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int23 attached to pci1 device 6 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int20 attached to pci1 device 6 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic6: int21 attached to pci1 device 6 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ACPI Object Type 0x0c at acpi0 not configured
ACPI Object Type 0x0c at acpi0 not configured
ACPI Object Type 0x0c at acpi0 not configured
ACPI Object Type 0x0c at acpi0 not configured
PNP0C0C at acpi0 not configured
PNP0C01 at acpi0 not configured
INT0800 at acpi0 not configured
PNP0A03 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0800 at acpi0 not configured
PNP0C04 at acpi0 not configured
PNP0501 at acpi0 not configured
PNP0501 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0C0B at acpi0 not configured
ACPI Object Type 0x0d at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x254c (rev. 0x00)
ppb0 at pci0 dev 2 function 0: Intel E7500 MCH HI_B vppb 1 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
Intel 82870P2 P64H2 IOxAPIC (interrupt system, interface 0x20, revision 0x03) at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0: Intel 82870P2 P64H2 PCI-to-PCI Bridge (rev. 0x03)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
wm0 at pci2 dev 4 function 0: Intel i82544EI 1000BASE-X Ethernet, rev. 2
wm0: interrupting at apic 10 int 12 (irq 12)
wm0: Ethernet address 00:03:47:c7:e5:07
wm0: 1000baseSX, 1000baseSX-FDX, auto
Intel 82870P2 P64H2 IOxAPIC (interrupt system, interface 0x20, revision 0x03) at pci1 dev 30 function 0 not configured
ppb2 at pci1 dev 31 function 0: Intel 82870P2 P64H2 PCI-to-PCI Bridge (rev. 0x03)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
wm1 at pci3 dev 4 function 0: Intel i82544EI 1000BASE-T Ethernet, rev. 2
wm1: interrupting at apic 10 int 12 (irq 12)
wm1: Ethernet address 00:03:47:c7:e5:05
makphy0 at wm1 phy 1: Marvell 88E1000 Gigabit PHY, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb3 at pci0 dev 3 function 0: Intel E7500 MCH HI_C vppb 1 (rev. 0x00)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
Intel 82870P2 P64H2 IOxAPIC (interrupt system, interface 0x20, revision 0x03) at pci4 dev 28 function 0 not configured
ppb4 at pci4 dev 29 function 0: Intel 82870P2 P64H2 PCI-to-PCI Bridge (rev. 0x03)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
Intel 82870P2 P64H2 IOxAPIC (interrupt system, interface 0x20, revision 0x03) at pci4 dev 30 function 0 not configured
ppb5 at pci4 dev 31 function 0: Intel 82870P2 P64H2 PCI-to-PCI Bridge (rev. 0x03)
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled
wm2 at pci6 dev 4 function 0: Intel i82544EI 1000BASE-X Ethernet, rev. 2
wm2: interrupting at apic 10 int 11 (irq 11)
wm2: Ethernet address 00:03:47:c7:e5:06
wm2: 1000baseSX, 1000baseSX-FDX, auto
ppb6 at pci0 dev 4 function 0: Intel E7500 MCH HI_C vppb 1 (rev. 0x00)
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled
Intel 82870P2 P64H2 IOxAPIC (interrupt system, interface 0x20, revision 0x03) at pci7 dev 28 function 0 not configured
ppb7 at pci7 dev 29 function 0: Intel 82870P2 P64H2 PCI-to-PCI Bridge (rev. 0x03)
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled
Intel 82870P2 P64H2 IOxAPIC (interrupt system, interface 0x20, revision 0x03) at pci7 dev 30 function 0 not configured
ppb8 at pci7 dev 31 function 0: Intel 82870P2 P64H2 PCI-to-PCI Bridge (rev. 0x03)
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled
wm3 at pci9 dev 4 function 0: Intel i82546EB 1000BASE-T Ethernet, rev. 1
wm3: interrupting at apic 10 int 11 (irq 11)
wm3: Ethernet address 00:07:e9:13:e7:7a
makphy1 at wm3 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm4 at pci9 dev 4 function 1: Intel i82546EB 1000BASE-T Ethernet, rev. 1
wm4: interrupting at apic 10 int 11 (irq 11)
wm4: Ethernet address 00:07:e9:13:e7:7b
makphy2 at wm4 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: Intel 82801CA/CAM USB Controller (rev. 0x02)
uhci0: interrupting at apic 10 int 16 (irq 12)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ppb9 at pci0 dev 30 function 0: Intel 82801BA Hub-to-PCI Bridge (rev. 0x42)
pci10 at ppb9 bus 10
pci10: i/o space, memory space enabled
fxp0 at pci10 dev 4 function 0: i82559 Ethernet, rev 8
intr_establish: can't share intr source between different PIC types (legacy_irq 9 pin 9 slot 9)
fxp0: couldn't establish interrupt at apic 10 int 9 (irq 9)
fxp1 at pci10 dev 5 function 0: i82559 Ethernet, rev 8
fxp1: interrupting at apic 10 int 7 (irq 7)
fxp1: Ethernet address 00:03:47:c7:e5:03
inphy0 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp2 at pci10 dev 6 function 0: i82559 Ethernet, rev 8
fxp2: interrupting at apic 10 int 5 (irq 5)
fxp2: Ethernet address 00:03:47:c7:e5:04
inphy1 at fxp2 phy 1: i82555 10/100 media interface, rev. 4
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801CA LPC Interface (rev. 0x02)
pciide0 at pci0 dev 31 function 1: Intel 82801CA IDE Controller (rev. 0x02)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 1: <SAMSUNG SV1021H>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9732 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 19932192 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
Intel 82801CA/CAM SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
cpu0: prelint0 700<vector=0,delmode=7,dest=0> 0<target=0>
cpu0: prelint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: timer0 300c0<vector=c0,delmode=0,masked,dest=0> 0<target=0>
cpu0: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu0: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
cpu0: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic6: enabling
ioapic6: int3 1d1<vector=d1,delmode=1,dest=0> 0<target=0>
ioapic6: int4 1d0<vector=d0,delmode=1,dest=0> 0<target=0>
ioapic6: int5 d174<vector=74,delmode=1,pending,irrpending,level,dest=0> 0<target=0>

<SYSTEM REBOOTS>

--/9DWx/yDrRhgMJTb
Content-Type: text/plain; charset=us-ascii
Content-Description: smp-no-mpapic
Content-Disposition: attachment; filename="smp.txt"

booting hd0a:netbsd-current
5810596+127336+307736 [325648+275547]=0x6891d8
[ using 601688 bytes of netbsd ELF symbol table ]
BIOS CFG: Model-SubM-Rev: fc-01-00, 0x70<KBDINT,RTC,IC2>
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6K (GENERIC.MP) #0: Wed Dec 18 15:06:41 PST 2002
    root@super:/usr/src/sys/arch/i386/compile/GENERIC.MP
total memory = 511 MB
avail memory = 442 MB
using 6144 buffers containing 52360 KB of memory
BIOS32 rev. 0 found at 0xfb3c0
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Pentium 4 (686-class), 1599.91 MHz, id 0xf27
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu0: L2 cache 512 KB 64b/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: calibrating local timer
cpu0: apic clock running at 99 MHz
cpu0: 16 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel Pentium 4 (686-class), 1599.82 MHz, id 0xf27
cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu1: L2 cache 512 KB 64b/line 8-way
cpu1: ITLB 4K/4M: 64 entries
cpu1: DTLB 4K/4M: 64 entries
cpu2 at mainbus0: apid 2 (application processor)
cpu2: starting
cpu2: Intel Pentium 4 (686-class), 1599.82 MHz, id 0xf27
cpu2: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu2: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu2: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu2: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu2: L2 cache 512 KB 64b/line 8-way
cpu2: ITLB 4K/4M: 64 entries
cpu2: DTLB 4K/4M: 64 entries
cpu3 at mainbus0: apid 3 (application processor)
cpu3: starting
cpu3: Intel Pentium 4 (686-class), 1599.83 MHz, id 0xf27
cpu3: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu3: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu3: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu3: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu3: L2 cache 512 KB 64b/line 8-way
cpu3: ITLB 4K/4M: 64 entries
cpu3: DTLB 4K/4M: 64 entries
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type PCI
mpbios: bus 7 is type PCI
mpbios: bus 8 is type PCI
mpbios: bus 9 is type PCI
mpbios: bus 10 is type PCI
mpbios: bus 11 is type ISA
ioapic0 at mainbus0 apid 4 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 4
ioapic1 at mainbus0 apid 5 (I/O APIC)
ioapic1: pa 0xfec80000, version 20, 24 pins
ioapic2 at mainbus0 apid 6 (I/O APIC)
ioapic2: pa 0xfec80400, version 20, 24 pins
ioapic3 at mainbus0 apid 7 (I/O APIC)
ioapic3: pa 0xfec81000, version 20, 24 pins
ioapic4 at mainbus0 apid 8 (I/O APIC)
ioapic4: pa 0xfec81400, version 20, 24 pins
ioapic5 at mainbus0 apid 9 (I/O APIC)
ioapic5: pa 0xfec82000, version 20, 24 pins
ioapic6 at mainbus0 apid 10 (I/O APIC)
ioapic6: pa 0xfec82400, version 20, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x254c (rev. 0x00)
ppb0 at pci0 dev 2 function 0: Intel E7500 MCH HI_B vppb 1 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
Intel 82870P2 P64H2 IOxAPIC (interrupt system, interface 0x20, revision 0x03) at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0: Intel 82870P2 P64H2 PCI-to-PCI Bridge (rev. 0x03)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
wm0 at pci2 dev 4 function 0: Intel i82544EI 1000BASE-X Ethernet, rev. 2
wm0: interrupting at apic 6 int 0 (irq 12)
wm0: Ethernet address 00:03:47:c7:e5:07
wm0: 1000baseSX, 1000baseSX-FDX, auto
Intel 82870P2 P64H2 IOxAPIC (interrupt system, interface 0x20, revision 0x03) at pci1 dev 30 function 0 not configured
ppb2 at pci1 dev 31 function 0: Intel 82870P2 P64H2 PCI-to-PCI Bridge (rev. 0x03)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
wm1 at pci3 dev 4 function 0: Intel i82544EI 1000BASE-T Ethernet, rev. 2
wm1: interrupting at apic 5 int 0 (irq 12)
wm1: Ethernet address 00:03:47:c7:e5:05
makphy0 at wm1 phy 1: Marvell 88E1000 Gigabit PHY, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb3 at pci0 dev 3 function 0: Intel E7500 MCH HI_C vppb 1 (rev. 0x00)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
Intel 82870P2 P64H2 IOxAPIC (interrupt system, interface 0x20, revision 0x03) at pci4 dev 28 function 0 not configured
ppb4 at pci4 dev 29 function 0: Intel 82870P2 P64H2 PCI-to-PCI Bridge (rev. 0x03)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
Intel 82870P2 P64H2 IOxAPIC (interrupt system, interface 0x20, revision 0x03) at pci4 dev 30 function 0 not configured
ppb5 at pci4 dev 31 function 0: Intel 82870P2 P64H2 PCI-to-PCI Bridge (rev. 0x03)
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled
wm2 at pci6 dev 4 function 0: Intel i82544EI 1000BASE-X Ethernet, rev. 2
wm2: interrupting at apic 7 int 0 (irq 10)
wm2: Ethernet address 00:03:47:c7:e5:06
wm2: 1000baseSX, 1000baseSX-FDX, auto
ppb6 at pci0 dev 4 function 0: Intel E7500 MCH HI_C vppb 1 (rev. 0x00)
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled
Intel 82870P2 P64H2 IOxAPIC (interrupt system, interface 0x20, revision 0x03) at pci7 dev 28 function 0 not configured
ppb7 at pci7 dev 29 function 0: Intel 82870P2 P64H2 PCI-to-PCI Bridge (rev. 0x03)
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled
Intel 82870P2 P64H2 IOxAPIC (interrupt system, interface 0x20, revision 0x03) at pci7 dev 30 function 0 not configured
ppb8 at pci7 dev 31 function 0: Intel 82870P2 P64H2 PCI-to-PCI Bridge (rev. 0x03)
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled
wm3 at pci9 dev 4 function 0: Intel i82546EB 1000BASE-T Ethernet, rev. 1
wm3: interrupting at apic 9 int 0 (irq 11)
wm3: Ethernet address 00:07:e9:13:e7:7a
makphy1 at wm3 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm4 at pci9 dev 4 function 1: Intel i82546EB 1000BASE-T Ethernet, rev. 1
wm4: interrupting at apic 9 int 1 (irq 11)
wm4: Ethernet address 00:07:e9:13:e7:7b
makphy2 at wm4 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: Intel 82801CA/CAM USB Controller (rev. 0x02)
uhci0: interrupting at apic 4 int 16 (irq 12)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ppb9 at pci0 dev 30 function 0: Intel 82801BA Hub-to-PCI Bridge (rev. 0x42)
pci10 at ppb9 bus 10
pci10: i/o space, memory space enabled
fxp0 at pci10 dev 4 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at apic 4 int 20 (irq 9)
fxp0: Ethernet address 00:03:47:c7:e5:02
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci10 dev 5 function 0: i82559 Ethernet, rev 8
fxp1: interrupting at apic 4 int 21 (irq 7)
fxp1: Ethernet address 00:03:47:c7:e5:03
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp2 at pci10 dev 6 function 0: i82559 Ethernet, rev 8
fxp2: interrupting at apic 4 int 22 (irq 5)
fxp2: Ethernet address 00:03:47:c7:e5:04
inphy2 at fxp2 phy 1: i82555 10/100 media interface, rev. 4
inphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801CA LPC Interface (rev. 0x02)
pciide0 at pci0 dev 31 function 1: Intel 82801CA IDE Controller (rev. 0x02)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 1: <SAMSUNG SV1021H>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9732 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 19932192 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
Intel 82801CA/CAM SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
ioapic6: enabling
ioapic5: enabling
ioapic4: enabling
ioapic3: enabling
ioapic2: enabling
ioapic1: enabling
ioapic0: enabling
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cpu1: CPU 1 running
cpu2: CPU 2 running
cpu3: CPU 3 running

--/9DWx/yDrRhgMJTb--