On Tue, 10 Feb 2004, Jochen Kunz wrote:

> On Tue, 10 Feb 2004 02:32:43 +0000 (UTC)
> Nathan Langford <njl@sdf.lonestar.org> wrote:
>
> > /dev looks the same when I boot the -current kernel as the -1.6.1, so
> > I don't think it's doing anything like that.
> Some time ago the major device numbers where rearranged. Maybe you got
> bitten by major device numbers not fitting to your kernel. I sugest to
> boot from some -current install media (put netbsd.INSTALL from -current
> into / and boot it) that runs inside a kernel attached RAM disk. Leave
> to a single user shell, mount the / slice on the disk, move the old dev
> directory out of the way, mkdir a new dev directory, copy MAKEDEV and
> MAKEDEV.local to it and run "./MAKEDEV all".

This is clearly what happened to me; sd* disks were switched around, and
when I decided to forget trying to upgrade and simply do a fresh install
on another disk, I ended up accidentally overwriting my 1.6.1
(non-backed-up) install (sigh...).  Luckily it was a relatively fresh
install, so getting everything back up to speed only took a few days.

I ended up installing a build from the releng server.  btw, sysinst is
getting better and better!  But both cpus are now running very nicely; the
system has been up for 3 days with no problems at all.  Life is good.

Thanks for your all the help.
-Nathan


----- dmesg ----
NetBSD 1.6ZJ (GENERIC.MP) #0: Fri Feb 13 09:34:21 UTC 2004

autobuild@tgm.netbsd.org:/autobuild/HEAD/i386/OBJ/autobuild/HEAD/src/sys/arch/i386/compile/GENERIC.MP
total memory = 511 MB
avail memory = 492 MB
BIOS32 rev. 0 found at 0xffe90
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (DELL     WS 420      )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Pentium III (686-class), 728.47 MHz, id 0x683
cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 383fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383fbff<FXSR,SSE>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 256 KB 32b/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: calibrating local timer
cpu0: apic clock running at 132 MHz
cpu0: 8 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel Pentium III (686-class), 728.44 MHz, id 0x683
cpu1: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 383fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu1: features 383fbff<FXSR,SSE>
cpu1: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu1: L2 cache 256 KB 32b/line 8-way
cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type ISA
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 2
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82840 Host (rev. 0x01)
pchb0: random number generator enabled
agp0 at pchb0: aperture at 0xf0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82840 AGP (rev. 0x01)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Nvidia Corporation Quadro (rev. 0x10)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ppb1 at pci0 dev 30 function 0: Intel 82801AA Hub-to-PCI Bridge (rev.
0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ex0 at pci2 dev 4 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt
(rev. 0x78)
ex0: interrupting at ioapic0 pin 16 (irq 9)
ex0: MAC address 00:b0:d0:3e:60:04
bmtphy0 at ex0 phy 24: Broadcom 3c905C internal PHY, rev. 7
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
clcs0 at pci2 dev 6 function 0: Cirrus Logic CS4280 CrystalClear Audio
Interface (rev. 0x01)
clcs0: interrupting at ioapic0 pin 18 (irq 10)
clcs0: ac97: Crystal CS4297A codec; headphone, 20 bit DAC, 18 bit ADC,
Crystal Semi 3D
clcs0: ac97: ext id 200<AMAP>
audio0 at clcs0: full duplex, independent
midi0 at clcs0: CS4280 MIDI UART
Texas Instruments TSB12LV23 OHCI IEEE 1394 Host Controller (Firewire
serial bus, interface 0x10) at pci2 dev 11 function 0 not configured
ppb2 at pci2 dev 14 function 0: Digital Equipment DECchip 21152 PCI-PCI
Bridge (rev. 0x03)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
ahc1 at pci3 dev 10 function 0: Adaptec aic7899 Ultra160 SCSI adapter
ahc1: interrupting at ioapic0 pin 18 (irq 10)
ahc1: aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
ahc2 at pci3 dev 10 function 1: Adaptec aic7899 Ultra160 SCSI adapter
ahc2: interrupting at ioapic0 pin 19 (irq 14)
ahc2: aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
scsibus1 at ahc2: 16 targets, 8 luns per target
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801AA LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801AA IDE Controller (ICH) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel ignored (disabled)
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus0 at piixide0 channel 1
uhci0 at pci0 dev 31 function 2: Intel 82801AA USB Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 19 (irq 14)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82801AA SMBus Controller (SMBus serial bus, revision 0x02) at pci0
dev 31 function 3 not configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <QUANTUM, VIKING II 4.5WLS, 3506> disk
fixed
sd0: 4350 MB, 8338 cyl, 5 head, 213 sec, 512 bytes/sect x 8910423 sectors
sd0: sync (25.00ns offset 31), 16-bit (80.000MB/s) transfers, tagged
queueing
sd1 at scsibus0 target 2 lun 0: <SEAGATE, ST39103LW, 3700> disk fixed
sd1: 8683 MB, 9772 cyl, 6 head, 303 sec, 512 bytes/sect x 17783240 sectors
sd1: sync (25.00ns offset 15), 16-bit (80.000MB/s) transfers, tagged
queueing
sd2 at scsibus0 target 4 lun 0: <SEAGATE, ST39102LW, 0005> disk fixed
sd2: 8683 MB, 6962 cyl, 12 head, 212 sec, 512 bytes/sect x 17783240
sectors
sd2: sync (25.00ns offset 15), 16-bit (80.000MB/s) transfers, tagged
queueing
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <CRD-8482B, , 1.05> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using
DMA data transfers)
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
cpu1: CPU 1 running
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)