Actually i found this (http://bugs.xfree86.org/show_bug.cgi?id=3D594) =
Articel at XFree.org.
For me it worked to remove the AGP driver from the Kernel. Though i =
couldnt figure out if: Option "PanelSize" "1024x768" works as well.

Bye John

-----Original Message-----
From: current-users-owner@NetBSD.org
[mailto:current-users-owner@NetBSD.org]On Behalf Of Heinrigs, John 3689
NAU HMX
Sent: Martes, 16 de Marzo de 2004 10:02 a.m.
To: current-users@netbsd.org
Subject: RE: Re: NetBSD 1.6.2 and XFree86 4.3.0


Hi once again (guess im wrong here in users should be X11-tech but now =
its started here),

under 4.4.0 i do actually guess DDC is enabled. Never the less it doesnt =
really seem to work properly. Though rather think i did something wrong =
in the config.


(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Type: 0
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 4, Detected Type: 0
(II) RADEON(0): Non-DDC laptop panel detected
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 0
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 0
(II) RADEON(0): Display Detected: Monitor1--Type 2, Monitor2--Type 0

(II) RADEON(0):
(II) RADEON(0): Primary Display =3D=3D Type 2
(II) RADEON(0): Panel ID string: =
\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\=
xff\xff\xff
(II) RADEON(0): Panel Size from BIOS: 65535x65535
(II) RADEON(0): BIOS provided dividers will be used.

   *** If unresolved symbols were reported above, they might not
   *** be the reason for the server aborting.

Fatal server error:
Caught signal 11.  Server aborting


Greetz John

>
> In article <2BDC34DB7425D511A0B300902740C790010453BB@naums01>,
>	"Heinrigs, John 3689 NAU HMX" <John.Heinrigs@heidelberg.com> writes:
> > Nevertheless i get the same Error installing from an ISO as
> > well. Updating the Xfree to 4.4.0 didn=B4t help as well.
>
> Do you have DDC enabled in your "/etc/X11/XF86Config"?
>
>	Kind regards
>
> --=20
> Matthias Scheler                                  =
http://scheler.de/~matthias/
>