Re: nb5 panic: kernel diagnostic assertion "cv_is_valid(cv)" failed: file "/usr/nbcvs/src-5/sys/kern/kern_condvar.c", line 329

[Hubert Feyrer <hubert%feyrer.de@localhost>]

On Tue, 27 Jan 2009, Hubert Feyrer wrote:
> Details below.

Just in case this matters: this is a Uniprocessor machine, I'll append 
dmesg output below.


 - Hubert


NetBSD 5.0_BETA (KERNEL) #14: Mon Jan 26 09:27:00 UTC 2009
        feyrer@foobar:/path/to/KERNEL
total memory = 495 MB
avail memory = 480 MB
VIA Technologies, Inc. CLE266-8235 ( )
PCI BIOS rev. 2.1 found at 0xfa9f0
PCI IRQ Routing Table rev. 1.0 found at 0xfd590, size 176 bytes (9 entries)
mainbus0 (root)
cpu0 at mainbus0: IDT/VIA 686-class, 999MHz, id 0x695
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x3123 (rev. 0x00)
agp0 at pchb0 (v2): aperture at 0xe4000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb091 (rev. 0x00)
pci1 at ppb0 bus 1
vga0 at pci1 dev 0 function 0: vendor 0x1106 product 0x3122 (rev. 0x03)
wsdisplay0 at vga0
drm at vga0 not configured
re0 at pci0 dev 11 function 0: RealTek 8139C+ 10/100BaseTX (rev. 0x20)
re0: interrupting at irq 5
re0: Ethernet address 00:90:0b:0d:ff:4d
rlphy0 at re0 phy 0: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re1 at pci0 dev 12 function 0: RealTek 8139C+ 10/100BaseTX (rev. 0x20)
re1: interrupting at irq 12
re1: Ethernet address 00:90:0b:0d:ff:4c
rlphy1 at re1 phy 0: Realtek internal PHY
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re2 at pci0 dev 13 function 0: RealTek 8139C+ 10/100BaseTX (rev. 0x20)
re2: interrupting at irq 10
re2: Ethernet address 00:90:0b:0d:ff:4b
rlphy2 at re2 phy 0: Realtek internal PHY
rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re3 at pci0 dev 14 function 0: RealTek 8139C+ 10/100BaseTX (rev. 0x20)
re3: interrupting at irq 11
re3: Ethernet address 00:90:0b:0d:ff:4a
rlphy3 at re3 phy 0: Realtek internal PHY
rlphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev. 0x80)
uhci0: interrupting at irq 5
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev. 0x80)
uhci1: interrupting at irq 12
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev. 0x80)
uhci2: interrupting at irq 10
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 16 function 3: vendor 0x1106 product 0x3104 (rev. 0x82)
ehci0: interrupting at irq 11
ehci0: dropped intr workaround enabled
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
pcib0 at pci0 dev 17 function 0
pcib0: vendor 0x1106 product 0x3177 (rev. 0x00)
viaide0 at pci0 dev 17 function 1
viaide0: VIA Technologies VT8235 ATA133 controller
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pckbc0 at isa0 port 0x60-0x64
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff
attimer0: attached to pcppi0
wd0 at atabus0 drive 0: <SECUDOS 4GB CF>
wd0: 3882 MB, 7889 cyl, 16 head, 63 sec, 512 bytes/sect x 7952112 sectors
uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 
1
uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 
1
uhub2 at usb2: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 
1
uhub3 at usb3: vendor 0x1106 EHCI root hub, class 9/0, rev 2.00/1.00, addr 
1
IPsec: Initialized Security Association Processing.
boot device: wd0
root on wd0a dumps on wd0b