On Dec 16, 2016 09:01, "Oleksandr Kozachuk" <ddeus.pkgsrc%mailnull.com@localhost
<mailto:ddeus.pkgsrc%mailnull.com@localhost>> wrote:
Hi!
I have a issue with my audio mixer for long time now (may be 5
years or so now), the audio volume changes only if I change
"inputs.dac" and if I change "outputs.master" nothing changes. I
think the "inputs.dac" and "outputs.master" are switched some how.
Are you using headphones? Try outputs.master2 ?
-bch
For me personally the mixer name is not important, but several
applications changing the outputs.master volume with build-in
buttons and it is very annoying. Maybe somebody has any idea how
to fix that?
$ mixerctl -a
inputs.dac=156,156
outputs.master=198,198
inputs.reclvl=88,88
inputs.reclvl.mute=on
outputs.master2=184,184
outputs.master2.mute=off
outputs.master3=0,0
outputs.master3.mute=off
outputs.master4=0,0
outputs.master4.mute=off
outputs.master5=0,0
outputs.master5.mute=off
outputs.master6=252,252
outputs.master7=252,252
outputs.master8=0,0
outputs.master8.mute=off
outputs.master9=0,0
outputs.master9.mute=off
outputs.dacsel=DAC00,DIG02,DIG03
record.source=ADC01
outputs.dac0=255,0
inputs.mic0=255,0
$ dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.99.47 (GENERIC) #0: Wed Dec 14 19:52:04 CET 2016
root%xenon.kozachuk.info@localhost:/src/obj/amd64/sys/arch/amd64/compile/GENERIC
total memory = 7166 MB
avail memory = 6938 MB
WARNING: module error: builtin spkr failed: 17
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
System manufacturer System Product Name (System Version)
mainbus0 (root)
ACPI: RSDP 0x00000000000FB340 000024 (v02 ACPIAM)
ACPI: XSDT 0x000000008FE70100 00005C (v01 122310 XSDT1951 20101223
MSFT 00000097)
ACPI: FACP 0x000000008FE70290 0000F4 (v03 122310 FACP1951 20101223
MSFT 00000097)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has
valid Length but zero Address: 0x0000000000000000/0x1
(20160930/tbfadt-694)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block:
64/32 (20160930/tbfadt-643)
ACPI: DSDT 0x000000008FE70450 00EE09 (v01 A1580 A1580001 00000001
INTL 20060113)
ACPI: FACS 0x000000008FE88000 000040
ACPI: FACS 0x000000008FE88000 000040
ACPI: APIC 0x000000008FE70390 00007C (v01 122310 APIC1951 20101223
MSFT 00000097)
ACPI: MCFG 0x000000008FE70410 00003C (v01 122310 OEMMCFG 20101223
MSFT 00000097)
ACPI: OEMB 0x000000008FE88040 000072 (v01 122310 OEMB1951 20101223
MSFT 00000097)
ACPI: SRAT 0x000000008FE7F8A0 0000C8 (v01 AMD FAM_F_10 00000002
AMD 00000001)
ACPI: HPET 0x000000008FE7F970 000038 (v01 122310 OEMHPET 20101223
MSFT 00000097)
ACPI: SSDT 0x000000008FE7F9B0 000458 (v01 A M I POWERNOW 00000001
AMD 00000001)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: 2 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x21, 24 pins
cpu0 at mainbus0 apid 0
cpu0: AMD Athlon(tm) II X2 240 Processor, id 0x100f63
cpu0: SVM disabled by the BIOS
cpu1 at mainbus0 apid 1
cpu1: AMD Athlon(tm) II X2 240 Processor, id 0x100f63
acpi0 at mainbus0: Intel ACPICA 20160930
acpi0: X/RSDT: OemId <122310,XSDT1951,20101223>, AslId <MSFT,00000097>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
BROD (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
aibs0 at acpi0 (ASOC, ATK0110-16843024): ASUSTeK AI Booster
OMSC (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
SIOR (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpiwmi0 at acpi0 (AOD, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
ACPI: Enabled 2 GPEs in block 00 to 1F
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 1022 product 9601 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 1043 product 9602 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
radeon0 at pci1 dev 5 function 0: vendor 1002 product 9715 (rev. 0x00)
hdaudio0 at pci1 dev 5 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 19
hdafg0 at hdaudio0: vendor 1002 product 791a
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 44100Hz 48000Hz PCM16 AC3
ppb1 at pci0 dev 10 function 0: vendor 1022 product 9609 (rev. 0x00)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root
Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit
Ethernet (rev. 0x06)
re0: interrupting at ioapic0 pin 18
re0: Ethernet address bc:ae:c5:e5:e3:e8
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media
interface, rev. 4
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT, 1000baseT-FDX, auto
ixpide0 at pci0 dev 17 function 0: ATI Technologies IXP IDE
Controller (rev. 0x00)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to native-PCI mode
ixpide0: using ioapic0 pin 22 for native-PCI interrupt
atabus0 at ixpide0 channel 0
ixpide0: secondary channel configured to native-PCI mode
atabus1 at ixpide0 channel 1
ohci0 at pci0 dev 18 function 0: vendor 1002 product 4397 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 16
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 18 function 1: vendor 1002 product 4398 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 16
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 1002 product 4396 (rev. 0x00)
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
ohci2 at pci0 dev 19 function 0: vendor 1002 product 4397 (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb3 at ohci2: USB revision 1.0
ohci3 at pci0 dev 19 function 1: vendor 1002 product 4398 (rev. 0x00)
ohci3: interrupting at ioapic0 pin 18
ohci3: OHCI version 1.0, legacy support
usb4 at ohci3: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 1002 product 4396 (rev. 0x00)
ehci1: interrupting at ioapic0 pin 19
ehci1: dropped intr workaround enabled
ehci1: EHCI version 1.0
ehci1: companion controllers, 3 ports each: ohci2 ohci3
usb5 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 1002 product 4385 (rev.
0x3c)
piixpm0: interrupting at SMI, polling
iic0 at piixpm0: I2C bus
ixpide1 at pci0 dev 20 function 1: ATI Technologies IXP IDE
Controller (rev. 0x00)
ixpide1: bus-master DMA support present
ixpide1: primary channel configured to compatibility mode
ixpide1: primary channel interrupting at ioapic0 pin 14
atabus2 at ixpide1 channel 0
ixpide1: secondary channel configured to compatibility mode
ixpide1: secondary channel interrupting at ioapic0 pin 15
atabus3 at ixpide1 channel 1
hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 16
hdafg1 at hdaudio1: vendor 1106 product 0397
hdafg1: DAC00 8ch: Speaker [Jack], HP Out [Jack]
hdafg1: ADC01 2ch: Line In [Jack], Mic In [Jack]
hdafg1: DIG02 2ch: Digital Out [Jack]
hdafg1: DIG03 2ch: SPDIF Out [Jack]
hdafg1: 8ch/2ch 48000Hz PCM16*
audio0 at hdafg1: full duplex, playback, capture, mmap, independent
spkr1 at audio0
pcib0 at pci0 dev 20 function 3: vendor 1002 product 439d (rev. 0x00)
ppb2 at pci0 dev 20 function 4: vendor 1002 product 4384 (rev. 0x00)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
ohci4 at pci0 dev 20 function 5: vendor 1002 product 4399 (rev. 0x00)
ohci4: interrupting at ioapic0 pin 18
ohci4: OHCI version 1.0, legacy support
usb6 at ohci4: USB revision 1.0
pchb1 at pci0 dev 24 function 0: vendor 1022 product 1200 (rev. 0x00)
pchb2 at pci0 dev 24 function 1: vendor 1022 product 1201 (rev. 0x00)
pchb3 at pci0 dev 24 function 2: vendor 1022 product 1202 (rev. 0x00)
amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family10h)
pchb4 at pci0 dev 24 function 4: vendor 1022 product 1204 (rev. 0x00)
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: P0: FFH, lat 4 us, pow 31360 mW, 2800 MHz
acpicpu0: P1: FFH, lat 4 us, pow 22100 mW, 2100 MHz
acpicpu0: P2: FFH, lat 4 us, pow 18720 mW, 1600 MHz
acpicpu0: P3: FFH, lat 4 us, pow 9030 mW, 800 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
ERROR: 292 cycle TSC drift observed
uhub0 at usb1: vendor 1002 OHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb3: vendor 1002 OHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb5: vendor 1002 EHCI root hub, class 9/0, rev
2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
uhub3 at usb0: vendor 1002 OHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
uhub4 at usb2: vendor 1002 EHCI root hub, class 9/0, rev
2.00/1.00, addr 1
uhub4: 6 ports with 6 removable, self powered
uhub5 at usb4: vendor 1002 OHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub5: 3 ports with 3 removable, self powered
uhub6 at usb6IPsec: Initialized Security Association Processing.
: vendor 1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
ehci0: handing over low speed device on port 2 to ohci0
ehci0: handing over low speed device on port 5 to ohci1
uhidev0 at uhub3 port 2 configuration 1 interface 0
uhidev0: Logitech USB Laser Mouse, rev 2.00/56.01, addr 2, iclass 3/1
ums0 at uhidev0: 8 buttons, W and Z dirs
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 2 configuration 1 interface 0
uhidev1: Metadot - Das Keyboard Das Keyboard Model S, rev
1.10/1.00, addr 2, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
uhub7 at uhub4 port 6: vendor 0409 product 005a, class 9/0, rev
2.00/1.00, addr 2
uhub7: single transaction translator
wd0 at atabus1 drive 0
wd0: <WDC WD10EFRX-68JCSN0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x
1953525168 sectors
uhub7: 2 ports with 2 removable, self powered
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6
(Ultra/133)
wd0(ixpide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133)
(using DMA)
atapibus0 at atabus2: 2 targets
cd0 at atapibus0 drive 1: <CR-48X9TE, 2A16LE0271, 1.0C> cdrom
removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
(Ultra/33)
cd0(ixpide1:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33)
(using DMA)
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
spkr2 at audio1
wskbd0 at ukbd0: console keyboard
uhidev2 at uhub0 port 2 configuration 1 interface 1
uhidev2: Metadot - Das Keyboard Das Keyboard Model S, rev
1.10/1.00, addr 2, iclass 3/0
uhidev2: 3 report ids
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.47/modules
drm: initializing kernel modesetting (RS880 0x1002:0x9715
0x1043:0x843E).
drm: register mmio base: 0xfebe0000
drm: register mmio size: 65536
drm kern info: ATOM BIOS: 113
radeon0: info: VRAM: 1024M 0x00000000C0000000 - 0x00000000FFFFFFFF
(1024M used)
radeon0: info: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
drm: Detected VRAM RAM=400M, BAR=256M
drm: RAM width 32bits DDR
Zone kernel: Available graphics memory: 2518488 kiB
Zone dma32: Available graphics memory: 2097152 kiB
drm: radeon: 1024M of VRAM memory ready
drm: radeon: 512M of GTT memory ready.
drm: Loading RS780 Microcode
drm: GART: num cpu pages 131072, num gpu pages 131072
drm: PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon0: info: WB enabled
radeon0: info: fence driver on ring 0 use gpu addr
0x00000000a0000c00 and cpu addr 0x0xffff80007e709c00
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
radeon0: interrupting at ioapic0 pin 18 (radeon)
drm: radeon: irq initialized.
drm: ring test on 0 succeeded in 1 usecs
drm: ib test on ring 0 succeeded in 0 usecs
drm: Radeon Display Connectors
drm: Connector 0:
drm: VGA-1
drm: DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
drm: Encoders:
drm: CRT1: INTERNAL_KLDSCP_DAC1
drm: Connector 1:
drm: DVI-D-1
drm: HPD1
drm: DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
drm: Encoders:
drm: DFP3: INTERNAL_KLDSCP_LVTMA
radeondrmkmsfb0 at radeon0
radeon0: info: registered panic notifier
radeondrmkmsfb0: framebuffer at 0xffff80007ea50000, size
1920x1080, depth 32, stride 7680
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100
emulation), using wskbd0
wsmux1: connecting to wsdisplay0