Current-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: current crashes on X start
Hi,
Martin Husemann wrote:
>> I launch X11. A cursor appears, evberything else is black.
>> Computer resets.
>> Fun.
> Give us some details ;-)
>
> I updated a machine today and it does not do that - most likely this is
> graphics card/driver related.
Oh, my tree is of yesterday, because it takes so much time to build
kernel + userland and i kept it "coherent".
A first detail is that it crashed with the new kernel and the old
userland (as I noted) but I checed.
Then, below, my dmesg.
the kern drm errors have always been there, never fully fixed, but
things worked nevertheless.
Console is working in high-res.
I can also have the netbsd/netbsd.core file but they are big, so I won't
post them on the list, but send them privately if requested.
Riccardo
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003, 2004, 2005,
[ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017,
[ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All
rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All
rights reserved.
[ 1.000000] NetBSD 9.99.49 (HP620) #4: Wed Mar 11 20:21:04 CET 2020
[ 1.000000] multix@disc:/usr/obj/sys/arch/amd64/compile/HP620
[ 1.000000] total memory = 3996 MB
[ 1.000000] avail memory = 3853 MB
[ 1.000000] pool redzone disabled for 'buf4k'
[ 1.000000] pool redzone disabled for 'buf64k'
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] running cgd selftest aes-xts-256 aes-xts-512 done
[ 1.000000] RTC BIOS diagnostic error
0xef<clock_battery,ROM_cksum,config_unit,fixed_disk,invalid_time>
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz
quality 100
[ 1.000003] Hewlett-Packard HP 620 (F.08)
[ 1.000003] mainbus0 (root)
[ 1.000003] ACPI: RSDP 0x00000000000F6970 000024 (v02 HPQOEM)
[ 1.000003] ACPI: XSDT 0x00000000B9FFE120 000074 (v01 HPQOEM
SLIC-MPC 0000000F 01000013)
[ 1.000003] ACPI: FACP 0x00000000B9FFC000 0000F4 (v03 HPQOEM
1526 0000000F HP 00000001)
[ 1.000003] ACPI: DSDT 0x00000000B9FDB000 01B62B (v01 HPQOEM
1526 00000001 INTL 20060912)
[ 1.000003] ACPI: FACS 0x00000000B9FAD000 000040
[ 1.000003] ACPI: HPET 0x00000000B9FFB000 000038 (v01 HPQOEM
1526 00000001 HP 00000001)
[ 1.000003] ACPI: APIC 0x00000000B9FFA000 000084 (v01 HPQOEM
1526 00000001 HP 00000001)
[ 1.000003] ACPI: MCFG 0x00000000B9FF9000 00003C (v01 HPQOEM
1526 00000001 HP 00000001)
[ 1.000003] ACPI: ASF! 0x00000000B9FF8000 0000A0 (v32 HPQOEM
1526 00000001 HP 00000001)
[ 1.000003] ACPI: SSDT 0x00000000B9FD8000 0002DD (v01 HPQOEM
SataAhci 00001000 INTL 20060912)
[ 1.000003] ACPI: SLIC 0x00000000B9FD6000 000176 (v01 HPQOEM
SLIC-MPC 00000001 HP 00000001)
[ 1.000003] ACPI: SSDT 0x00000000B9FD5000 00066C (v01 PmRef
CpuPm 00003000 INTL 20060912)
[ 1.000003] ACPI: SSDT 0x00000000B9FD4000 000288 (v01 PmRef
Cpu0Tst 00003000 INTL 20060912)
[ 1.000003] ACPI: SSDT 0x00000000B9FD3000 000225 (v01 PmRef
ApTst 00003000 INTL 20060912)
[ 1.000003] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 1.000003] ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20,
24 pins
[ 1.000003] cpu0 at mainbus0 apid 0
[ 1.000003] cpu0: Intel(R) Core(TM)2 Duo CPU T6670 @ 2.20GHz,
id 0x1067a
[ 1.000003] cpu0: node 0, package 0, core 0, smt 0
[ 1.000003] cpu1 at mainbus0 apid 1
[ 1.000003] cpu1: Intel(R) Core(TM)2 Duo CPU T6670 @ 2.20GHz,
id 0x1067a
[ 1.000003] cpu1: node 0, package 0, core 1, smt 0
[ 1.000003] acpi0 at mainbus0: Intel ACPICA 20191213
[ 1.000003] acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,0000000f>, AslId
< ,01000013>
[ 1.000003] acpi0: MCFG: segment 0, bus 0-255, address
0x00000000e0000000
[ 1.000003] ACPI: Dynamic OEM Table Load:
[ 1.000003] ACPI: SSDT 0xFFFFE54B5E8CB748 000275 (v01 PmRef
Cpu0Ist 00003000 INTL 20060912)
[ 1.000003] ACPI: Dynamic OEM Table Load:
[ 1.000003] ACPI: SSDT 0xFFFFE54B5E91A448 00057B (v01 PmRef
Cpu0Cst 00003001 INTL 20060912)
[ 1.000003] ACPI: Dynamic OEM Table Load:
[ 1.000003] ACPI: SSDT 0xFFFFE54B5E917288 0001D7 (v01 PmRef
ApIst 00003000 INTL 20060912)
[ 1.000003] ACPI: Dynamic OEM Table Load:
[ 1.000003] ACPI: SSDT 0xFFFFE54B5E976908 00008D (v01 PmRef
ApCst 00003000 INTL 20060912)
[ 1.000003] acpi0: SCI interrupting at int 9
[ 1.000003] acpi0: fixed power button present
[ 1.000003] timecounter: Timecounter "ACPI-Fast" frequency 3579545
Hz quality 1000
[ 1.039823] hpet0 at acpi0: high precision event timer (mem
0xfed00000-0xfed00400)
[ 1.039823] timecounter: Timecounter "hpet0" frequency 14318180 Hz
quality 2000
[ 1.040029] acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
[ 1.040029] PDRC (PNP0C02) at acpi0 not configured
[ 1.040029] acpivga0 at acpi0 (GFX0): ACPI Display Adapter
[ 1.040029] acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output
Device
[ 1.040029] acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output
Device
[ 1.040029] acpiout1: brightness levels:
[0,5,10,15,20,25,30,33,36,40,43,46,50,55,60,65,70,75,80,83,86,90,93,96,100]
[ 1.040029] acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output
Device
[ 1.040029] acpiout3 at acpivga0 (DD04, 0x0300): ACPI Display Output
Device
[ 1.040029] acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output
Device
[ 1.040029] acpivga0: autoconfiguration error: unknown output device
acpiout0
[ 1.040029] acpivga0: autoconfiguration error: unknown output device
acpiout2
[ 1.040029] acpivga0: autoconfiguration error: unknown output device
acpiout3
[ 1.040029] acpivga0: autoconfiguration error: unknown output device
acpiout4
[ 1.040029] acpivga0: connected output devices:
[ 1.040029] acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
[ 1.040029] FWHD (INT0800) at acpi0 not configured
[ 1.040029] HTAM (PNP0C02) at acpi0 not configured
[ 1.040029] LDRC (PNP0C02) at acpi0 not configured
[ 1.040029] attimer1 at acpi0 (TIMR, PNP0100): io
0x40-0x43,0x50-0x53 irq 0
[ 1.040029] pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64
irq 1
[ 1.040029] pckbc2 at acpi0 (PS2M, SYN0176) (aux port): irq 12
[ 1.040029] acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
[ 1.040029] acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
[ 1.040029] acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
[ 1.040029] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
[ 1.040029] acpidalb0 at acpi0 (HST1, PNP0C32-1): Direct Application
Launch Button
[ 1.040029] acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
[ 1.040029] wmihp0 at acpiwmi0: HP WMI mappings
[ 1.040029] acpifan0 at acpi0 (FAN6, PNP0C0B-6): ACPI Fan
[ 1.040029] acpifan1 at acpi0 (FAN7, PNP0C0B-7): ACPI Fan
[ 1.040029] acpifan2 at acpi0 (FAN8, PNP0C0B-8): ACPI Fan
[ 1.040029] acpifan3 at acpi0 (FAN9, PNP0C0B-9): ACPI Fan
[ 1.040029] acpifan4 at acpi0 (FANA, PNP0C0B-10): ACPI Fan
[ 1.040029] acpifan5 at acpi0 (FANB, PNP0C0B-11): ACPI Fan
[ 1.040029] acpifan6 at acpi0 (FANG, PNP0C0B-12): ACPI Fan
[ 1.040029] acpitz0 at acpi0 (GFXZ)
[ 1.040029] acpitz0: active cooling level 0: 105.0C
[ 1.040029] acpitz0: active cooling level 1: 96.0C
[ 1.040029] acpitz0: active cooling level 2: 87.0C
[ 1.040029] acpitz0: active cooling level 3: 79.0C
[ 1.040029] acpitz0: active cooling level 4: 71.0C
[ 1.040029] acpitz0: active cooling level 5: 63.0C
[ 1.040029] acpitz0: active cooling level 6: 56.0C
[ 1.040029] acpitz0: levels: critical 108.0 C
[ 1.040029] acpifan7 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
[ 1.040029] acpifan8 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
[ 1.040029] acpifan9 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
[ 1.040029] acpifan10 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
[ 1.040029] acpifan11 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
[ 1.040029] acpifan12 at acpi0 (FAN5, PNP0C0B-5): ACPI Fan
[ 1.040029] acpitz1 at acpi0 (DTSZ)
[ 1.040029] acpitz1: levels: critical 105.0 C, passive cooling
[ 1.040029] acpitz2 at acpi0 (CPUZ): cpu0 cpu1
[ 1.040029] acpitz2: active cooling level 0: 84.0C
[ 1.040029] acpitz2: active cooling level 1: 74.0C
[ 1.040029] acpitz2: active cooling level 2: 62.0C
[ 1.040029] acpitz2: active cooling level 3: 52.0C
[ 1.040029] acpitz2: active cooling level 4: 44.0C
[ 1.040029] acpitz2: active cooling level 5: 37.0C
[ 1.040029] acpitz2: levels: critical 108.0 C, passive 105.0 C
[ 1.040029] acpitz3 at acpi0 (SKNZ): cpu0 cpu1
[ 1.040029] acpitz3: levels: critical 105.0 C, passive 95.0 C,
passive cooling
[ 1.040029] acpitz4 at acpi0 (BATZ): cpu0 cpu1
[ 1.040029] acpitz4: levels: critical 108.0 C, passive 60.0 C,
passive cooling
[ 1.040029] acpitz5 at acpi0 (FDTZ)
[ 1.040029] acpitz5: levels: critical 110.0 C, passive cooling
[ 1.040029] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 1.040029] pckbd0 at pckbc1 (kbd slot)
[ 1.040029] pckbc1: using irq 1 for kbd slot
[ 1.040029] wskbd0 at pckbd0: console keyboard
[ 1.040029] pms0 at pckbc1 (aux slot)
[ 1.040029] pms0: Synaptics touchpad version 7.4
[ 1.040029] pms0: Extended W mode, Palm detect, Multi-finger Report
[ 1.040029] pckbc1: using irq 12 for aux slot
[ 1.040029] wsmouse0 at pms0 mux 0
[ 1.040029] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.040029] pci0: i/o space, memory space enabled, rd/line, rd/mult,
wr/inv ok
[ 1.040029] pchb0 at pci0 dev 0 function 0: Intel 82GM45 Host Bridge
(rev. 0x07)
[ 1.040029] agp0 at pchb0: G4X-family chipset
[ 1.040029] agp0: detected 65020k stolen memory
[ 1.040029] agp0: aperture at 0xc0000000, size 0x10000000
[ 1.040029] i915drmkms0 at pci0 dev 2 function 0: Intel 82GM45
Integrated Graphics Device (rev. 0x07)
[ 1.040029] Intel 82GM45 Integrated Graphics Device (miscellaneous
display, revision 0x07) at pci0 dev 2 function 1 not configured
[ 1.040029] uhci0 at pci0 dev 26 function 0: Intel 82801I USB UHCI
Controller (rev. 0x03)
[ 1.040029] uhci0: interrupting at ioapic0 pin 16
[ 1.040029] usb0 at uhci0: USB revision 1.0
[ 1.040029] uhci1 at pci0 dev 26 function 1: Intel 82801I USB UHCI
Controller (rev. 0x03)
[ 1.040029] uhci1: interrupting at ioapic0 pin 17
[ 1.040029] usb1 at uhci1: USB revision 1.0
[ 1.040029] uhci2 at pci0 dev 26 function 2: Intel 82801I USB UHCI
Controller (rev. 0x03)
[ 1.040029] uhci2: interrupting at ioapic0 pin 18
[ 1.040029] usb2 at uhci2: USB revision 1.0
[ 1.040029] ehci0 at pci0 dev 26 function 7: Intel 82801I USB EHCI
Controller (rev. 0x03)
[ 1.040029] ehci0: interrupting at ioapic0 pin 19
[ 1.040029] ehci0: EHCI version 1.0
[ 1.040029] ehci0: 3 companion controllers, 2 ports each: uhci0
uhci1 uhci2
[ 1.040029] usb3 at ehci0: USB revision 2.0
[ 1.040029] hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
[ 1.040029] hdaudio0: interrupting at msi0 vec 0
[ 1.040029] hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
[ 1.040029] hdafg0 at hdaudio0: vendor 111d product 7666
[ 1.040029] hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
[ 1.040029] hdafg0: ADC01 2ch: Mic In [Jack]
[ 1.040029] hdafg0: ADC02 2ch: Mic In [Built-In]
[ 1.040029] hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz
PCM16 PCM20 PCM24 AC3
[ 1.040029] audio0 at hdafg0: playback, capture, full duplex,
independent
[ 1.040029] audio0: slinear_le:16 2ch 48000Hz, blk 40ms for playback
[ 1.040029] audio0: slinear_le:16 2ch 48000Hz, blk 40ms for recording
[ 1.040029] spkr0 at audio0: PC Speaker (synthesized)
[ 1.040029] wsbell at spkr0 not configured
[ 1.040029] hdafg1 at hdaudio0: vendor 8086 product 2802
[ 1.040029] hdafg1: HDMI00 8ch: Digital Out [Jack]
[ 1.040029] hdafg1: 8ch/0ch 48000Hz PCM16*
[ 1.040029] ppb0 at pci0 dev 28 function 0: Intel 82801I PCI Express
Port #1 (rev. 0x03)
[ 1.040029] ppb0: PCI Express capability version 1 <Root Port of
PCI-E Root Complex> x1 @ 2.5GT/s
[ 1.040029] pci1 at ppb0 bus 1
[ 1.040029] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.040029] ppb1 at pci0 dev 28 function 1: Intel 82801I PCI Express
Port #2 (rev. 0x03)
[ 1.040029] ppb1: PCI Express capability version 1 <Root Port of
PCI-E Root Complex> x1 @ 2.5GT/s
[ 1.040029] pci2 at ppb1 bus 2
[ 1.040029] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.040029] ral0 at pci2 dev 0 function 0: Ralink Technologies
RT3090 802.11b/g/n (rev. 0x00)
[ 1.040029] ral0: interrupting at ioapic0 pin 17
[ 1.040029] ral0: 802.11 address e0:2a:82:5d:49:2c
[ 1.040029] ral0: MAC/BBP RT3090 (rev 0x3213), RF RT3020 (MIMO 1T1R)
[ 1.040029] ppb2 at pci0 dev 28 function 2: Intel 82801I PCI Express
Port #3 (rev. 0x03)
[ 1.040029] ppb2: PCI Express capability version 1 <Root Port of
PCI-E Root Complex> x1 @ 2.5GT/s
[ 1.040029] pci3 at ppb2 bus 3
[ 1.040029] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.040029] ppb3 at pci0 dev 28 function 4: Intel 82801I PCI Express
Port #5 (rev. 0x03)
[ 1.040029] ppb3: PCI Express capability version 1 <Root Port of
PCI-E Root Complex> x1 @ 2.5GT/s
[ 1.040029] pci4 at ppb3 bus 68
[ 1.040029] pci4: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.040029] ppb4 at pci0 dev 28 function 5: Intel 82801I PCI Express
Port #6 (rev. 0x03)
[ 1.040029] ppb4: PCI Express capability version 1 <Root Port of
PCI-E Root Complex> x1 @ 2.5GT/s
[ 1.040029] pci5 at ppb4 bus 133
[ 1.040029] pci5: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.040029] re0 at pci5 dev 0 function 0: RealTek
8100E/8101E/8102E/8102EL PCIe 10/100BaseTX (rev. 0x02)
[ 1.040029] re0: interrupting at msix1 vec 0
[ 1.040029] re0: Ethernet address 64:31:50:7b:8f:55
[ 1.040029] re0: using 256 tx descriptors
[ 1.040029] rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
[ 1.040029] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[ 1.040029] uhci3 at pci0 dev 29 function 0: Intel 82801I USB UHCI
Controller (rev. 0x03)
[ 1.040029] uhci3: interrupting at ioapic0 pin 20
[ 1.040029] usb4 at uhci3: USB revision 1.0
[ 1.040029] uhci4 at pci0 dev 29 function 1: Intel 82801I USB UHCI
Controller (rev. 0x03)
[ 1.040029] uhci4: interrupting at ioapic0 pin 22
[ 1.040029] usb5 at uhci4: USB revision 1.0
[ 1.040029] uhci5 at pci0 dev 29 function 2: Intel 82801I USB UHCI
Controller (rev. 0x03)
[ 1.040029] uhci5: interrupting at ioapic0 pin 18
[ 1.040029] usb6 at uhci5: USB revision 1.0
[ 1.040029] ehci1 at pci0 dev 29 function 7: Intel 82801I USB EHCI
Controller (rev. 0x03)
[ 1.040029] ehci1: interrupting at ioapic0 pin 20
[ 1.040029] ehci1: EHCI version 1.0
[ 1.040029] ehci1: 3 companion controllers, 2 ports each: uhci3
uhci4 uhci5
[ 1.040029] usb7 at ehci1: USB revision 2.0
[ 1.040029] ppb5 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI
Bridge (rev. 0x93)
[ 1.040029] pci6 at ppb5 bus 134
[ 1.040029] pci6: i/o space, memory space enabled
[ 1.040029] ichlpcib0 at pci0 dev 31 function 0: Intel 82801IM LPC
Interface Bridge (rev. 0x03)
[ 1.040029] timecounter: Timecounter "ichlpcib0" frequency 3579545
Hz quality 1000
[ 1.040029] ichlpcib0: 24-bit timer
[ 1.040029] tco0 at ichlpcib0: TCO (watchdog) timer configured.
[ 1.040029] tco0: Min/Max interval 1/367 seconds
[ 1.040029] ahcisata0 at pci0 dev 31 function 2: Intel 82801I Mobile
AHCI SATA Controller with 4 ports (rev. 0x03)
[ 1.040029] ahcisata0: 64-bit DMA
[ 1.040029] ahcisata0: AHCI revision 1.20, 4 ports, 32 slots, CAP
0xef20ffc3<EMS,CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
[ 1.040029] ahcisata0: interrupting at msi2 vec 0
[ 1.040029] atabus0 at ahcisata0 channel 0
[ 1.040029] atabus1 at ahcisata0 channel 1
[ 1.040029] atabus2 at ahcisata0 channel 5
[ 1.040029] isa0 at ichlpcib0
[ 1.040029] pcppi0 at isa0 port 0x61
[ 1.040029] spkr1 at pcppi0: PC Speaker
[ 1.040029] wsbell at spkr1 not configured
[ 1.040029] midi0 at pcppi0: PC speaker
[ 1.040029] sysbeep0 at pcppi0
[ 1.040029] attimer1: attached to pcppi0
[ 1.040029] acpicpu0 at cpu0: ACPI CPU
[ 1.040029] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
[ 1.040029] acpicpu0: C2: FFH, lat 57 us, pow 100 mW
[ 1.040029] acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2201 MHz,
turbo boost
[ 1.040029] acpicpu0: P1: FFH, lat 10 us, pow 35000 mW, 2200 MHz
[ 1.040029] acpicpu0: P2: FFH, lat 10 us, pow 23000 mW, 1600 MHz
[ 1.040029] acpicpu0: P3: FFH, lat 10 us, pow 15000 mW, 1200 MHz
[ 1.040029] acpicpu0: T0: FFH, lat 1 us, pow 15000 mW, 100 %
[ 1.040029] acpicpu0: T1: FFH, lat 1 us, pow 13125 mW, 88 %
[ 1.040029] acpicpu0: T2: FFH, lat 1 us, pow 11250 mW, 75 %
[ 1.040029] acpicpu0: T3: FFH, lat 1 us, pow 9375 mW, 63 %
[ 1.040029] acpicpu0: T4: FFH, lat 1 us, pow 7500 mW, 50 %
[ 1.040029] acpicpu0: T5: FFH, lat 1 us, pow 5625 mW, 38 %
[ 1.040029] acpicpu0: T6: FFH, lat 1 us, pow 3750 mW, 25 %
[ 1.040029] acpicpu0: T7: FFH, lat 1 us, pow 1875 mW, 13 %
[ 1.040029] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
[ 1.040029] acpicpu1 at cpu1: ACPI CPU
[ 1.040029] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
[ 1.040029] cpu0 has 1 core siblings: cpu0
[ 1.040029] cpu0 has 2 pkg siblings: cpu1 cpu0
[ 1.040029] cpu0 has 1 1st siblings: cpu0
[ 1.040029] cpu0 first in package: cpu0
[ 1.040029] cpu1 has 1 core siblings: cpu1
[ 1.040029] cpu1 has 2 pkg siblings: cpu0 cpu1
[ 1.040029] cpu1 has 1 1st siblings: cpu0
[ 1.040029] cpu1 first in package: cpu0
[ 1.040029] timecounter: Timecounter "clockinterrupt" frequency 100
Hz quality 0
[ 1.725895] IPsec: Initialized Security Association Processing.
[ 1.735899] uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class
9/0, rev 1.00/1.00, addr 1
[ 1.735899] uhub0: 2 ports with 2 removable, self powered
[ 1.735899] acpiacad0: AC adapter online.
[ 1.735899] uhub1 at usb1: NetBSD (0000) UHCI root hub (0000), class
9/0, rev 1.00/1.00, addr 1
[ 1.735899] uhub1: 2 ports with 2 removable, self powered
[ 1.735899] uhub2 at usb2: NetBSD (0000) UHCI root hub (0000), class
9/0, rev 1.00/1.00, addr 1
[ 1.735899] uhub2: 2 ports with 2 removable, self powered
[ 1.735899] uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class
9/0, rev 2.00/1.00, addr 1
[ 1.735899] uhub3: 6 ports with 6 removable, self powered
[ 1.735899] uhub4 at usb4: NetBSD (0000) UHCI root hub (0000), class
9/0, rev 1.00/1.00, addr 1
[ 1.735899] uhub4: 2 ports with 2 removable, self powered
[ 1.735899] uhub5 at usb5: NetBSD (0000) UHCI root hub (0000), class
9/0, rev 1.00/1.00, addr 1
[ 1.735899] uhub5: 2 ports with 2 removable, self powered
[ 1.755912] acpibat0: Hewlett-Packard LIon rechargeable battery
[ 1.755912] acpibat0: granularity: low->warn 0.100 Ah, warn->full
0.100 Ah
[ 1.805941] uhub6 at usb6: NetBSD (0000) UHCI root hub (0000), class
9/0, rev 1.00/1.00, addr 1
[ 1.805941] uhub6: 2 ports with 2 removable, self powered
[ 1.805941] uhub7 at usb7: NetBSD (0000) EHCI root hub (0000), class
9/0, rev 2.00/1.00, addr 1
[ 1.805941] uhub7: 6 ports with 6 removable, self powered
[ 1.815948] ahcisata0 port 1: device present, speed: 1.5Gb/s
[ 1.815948] ahcisata0 port 0: device present, speed: 3.0Gb/s
[ 3.046691] ehci0: handing over full speed device on port 3 to uhci1
[ 3.346872] wd0 at atabus0 drive 0
[ 3.346872] wd0: <SAMSUNG HM321HI>
[ 3.346872] wd0: drive supports 16-sector PIO transfers, LBA48
addressing
[ 3.346872] wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect
x 625142448 sectors
[ 3.416914] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 6 (Ultra/133), NCQ (32 tags)
[ 3.416914] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2,
Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 3.416914] atapibus0 at atabus1: 1 targets
[ 3.426921] cd0 at atapibus0 drive 0: <hp DVDRAM GT30L,
KW8ACJN2906, mP04> cdrom removable
[ 3.436926] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 5 (Ultra/100)
[ 3.436926] cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2,
Ultra-DMA mode 5 (Ultra/100) (using DMA)
[ 5.107931] ubt0 at uhub1 port 1
[ 5.107931] ubt0: vendor 148f (0x148f) product 1000 (0x1000), rev
2.00/52.76, addr 2
[ 5.818359] uvideo0 at uhub3 port 5 configuration 1 interface 0:
Foxlink (0x5c8) HP Webcam [2 MP Fixed] (0x403), rev 2.00/1.06, addr 2
[ 5.838371] video0 at uvideo0pool redzone disabled for 'video'
[ 5.838371] : Foxlink (0x5c8) HP Webcam [2 MP Fixed] (0x403), rev
2.00/1.06, addr 2
[ 5.838371] WARNING: 4 errors while detecting hardware; check system
log.
[ 5.838371] boot device: wd0
[ 5.838371] root on wd0a dumps on wd0b
[ 5.838371] dump_misc_init: max_paddr = 0x140000000
[ 5.838371] mountroot: trying lfs...
[ 5.868389] mountroot: trying ffs...
[ 5.878395] root file system type: ffs
[ 5.878395] kern.module.path=/stand/amd64/9.99.49/modules
[ 5.878395] kern info: [drm] Memory usable by graphics device = 512M
[ 5.888507] kern info: [drm] Supports vblank timestamp caching Rev 2
(21.10.2013).
[ 5.888507] kern info: [drm] Driver supports precise vblank
timestamp query.
[ 5.888507] i915drmkms0: interrupting at msi3 vec 0 (i915drmkms0)
[ 6.318660] warning:
/usr/src/sys/external/bsd/drm2/dist/drm/drm_irq.c:1500: vblank wait
timed out on crtc 0
[ 6.378696] kern error:
[drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/intel_fifo_underrun.c:363)intel_cpu_fifo_underrun_irq_handler]
*ERROR* CPU pipe A FIFO underrun
[ 6.478756] warning:
/usr/src/sys/external/bsd/drm2/dist/drm/drm_irq.c:1500: vblank wait
timed out on crtc 0
[ 6.578817] warning:
/usr/src/sys/external/bsd/drm2/dist/drm/drm_irq.c:1500: vblank wait
timed out on crtc 0
[ 6.628848] intelfb0 at i915drmkms0
[ 6.628848] intelfb0: framebuffer at 0xffffc38076ec0000, size
1366x768, depth 32, stride 5504
[ 7.629451] wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100
emulation), using wskbd0
[ 7.629451] wsmux1: connecting to wsdisplay0
[ 7.659467] init: copying out path `/sbin/init' 11
[ 9.490572] re0: link state DOWN (was UNKNOWN)
[ 15.073929] wsdisplay0: screen 1 added (default, vt100 emulation)
[ 15.073929] wsdisplay0: screen 2 added (default, vt100 emulation)
[ 15.073929] wsdisplay0: screen 3 added (default, vt100 emulation)
[ 15.083937] wsdisplay0: screen 4 added (default, vt100 emulation)
[ 16.714917] kern error:
[drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/intel_fifo_underrun.c:363)intel_cpu_fifo_underrun_irq_handler]
*ERROR* CPU pipe A FIFO underrun
[ 63.633150] ral0: link state UP (was UNKNOWN)
[ 503.367769] ral0: link state DOWN (was UP)
[ 510.081809] ral0: link state UP (was DOWN)
[ 863.374410] ral0: link state DOWN (was UP)
[ 872.479889] ral0: link state UP (was DOWN)
Home |
Main Index |
Thread Index |
Old Index