pkgsrc-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[pkgsrc/trunk]: pkgsrc/emulators/qemu Update to 5.2.0
details: https://anonhg.NetBSD.org/pkgsrc/rev/fb1237c6c780
branches: trunk
changeset: 447480:fb1237c6c780
user: ryoon <ryoon%pkgsrc.org@localhost>
date: Sat Feb 20 22:59:29 2021 +0000
description:
Update to 5.2.0
Changelog:
IMPORTANT NOTE: in this release we have switched our build system to internally use Meson. Building should be broadly unchanged for most users, but please see the [[#Build Information|Build
Information]] section of the changelog for details and for '''the list of new [[#Build Dependencies |build dependencies]] you now need to install'''.
== System emulation ==
=== Incompatible changes ===
=== New deprecated options and features ===
Consult the [https://www.qemu.org/docs/master/system/deprecated.html "Deprecated Features"] chapter of the QEMU System Emulation User's Guide for the full list of historically deprecated
features/options.
In particular, note that the Unicore32 and lm32 guest support have been deprecated and will be removed in a future version. They are now only built if explicitly enabled in --target-list.
=== 68k ===
=== Alpha ===
=== Arm ===
* ARMv8.2 FEAT_FP16 (half-precision floating point) is now implemented for AArch32 emulation (AArch64 already supported this)
* AArch64 BTI is now supported in linux-user emulation mode (it was already implemented for system emulation)
* The SMMUv3 model now supports SMMUv3.2 range invalidation
* The sbsa-ref board now has an embedded controller model for guest powerdown and reboot requests
* The sbsa-ref board now has an SBSA-compatible generic watchdog device
* The Raspberry Pi boards now emulate the CPRMAN clock manager device
* Support for KVM on 32-bit host CPUs (deprecated in 5.0) has now been removed. (32-bit KVM guests on 64-bit hosts remain supported.)
* Two new board models in the mps2 family: mps2-an386 (Cortex-M4 based) and mps2-an500 (Cortex-M7 based)
* New board models in the raspi family: raspi3ap (the Pi 3 model A+), raspi0 (the Pi Zero) and raspi1ap (the Pi A+)
* New Nuvoton iBMC board models: npcm750-evb, quanta-gsj
* The 'max' CPU now implements a 48-bit physical address size when using TCG emulation.
* The 'virt' board supports kvm-steal-time (enabled by default for virt-5.2 and on) so that a guest OS can account for time when its CPUs were not running due to the host not scheduling the
corresponding vCPU threads.
=== AVR ===
=== HPPA ===
* Added power button emulation
* Boots NetBSD
* Boots old Linux CDs, e.g debian-0.5 and debian-0.6.1
* Artist framebuffer fixes when running dtwm on HP-UX
* Artist graphics allows screen resolution up to 2048 x 2048 pixels
* fw_cfg interface added
=== Microblaze ===
=== MIPS ===
=== Nios2 ===
=== OpenRISC ===
=== PowerPC ===
* The pseries machine now respects the nvdimm= machine option (previously NVDIMMs could be attached even with nvdimm=off)
* The pseries machine now does a better job of reflecting the user specified NUMA distances in the guest (PAPR limitations mean it's still a pretty poor approximation, though)
* We now fail more gracefully if attempting to run an HPT guest as a nested KVM guest (which isn't supported in the kernel for now)
* spapr_vscsi should now properly report that it does not support hotplug
* The pnv machine now allows firmware images up to 16MiB, instead of just 4 MiB (this matches the limit on physical FSP machines)
=== Renesas RX ===
=== Renesas SH ===
=== RISC-V ===
* Improvements to the Ibex (OpenTitan) PLIC
* OpenSBI v0.8 included by default
* Generic OpenSBI platform used when no -bios argument is supplied
* Support for a noMMU Linux kernel with the `-kernel` option
* A dummy L2 cache controller for the sifive_u is now included
* Support for the SiFive OTP device
* PMPCFG CSR setting bug fixed for RV64
* Improvements to the floating point helpers
* Experimental Hypervisor support updated to v0.6.1 and bug fixes
* Support for NUMA sockets on Virt and Spike Machines
* Support for the Microchip PolarFire SoC Icicle Kit
* Fix for crash seen when running 'poweroff' command on virt machine
* virt and sifive_u machines allow a custom dtb argument
* Support for migrating machines
=== s390 ===
* KVM: The diagnose 0x318 instruction is now supported.
* TCG: More instructions that were introduced with the z14 are now emulated.
* zPCI: vfio-pci devices now report real hardware features for functions, instead of emulated values (needs host kernel support.)
* virtiofs is now also supported on s390x via ccw
=== SPARC ===
* sun4m: fix panic when booting NetBSD with the TCX framebuffer
* sun4u: fix for sabre PCI IRQs being lost due to memory overflow
=== TileGX ===
=== Tricore ===
=== x86 ===
* A new KVM feature which improves the handling of asynchronous page faults is available with ''-cpu ...,kvm-async-pf-int''. This requires Linux 5.8.
=== Xtensa ===
* DFPU coprocessor with single and double precision floating point opcodes is now supported
* NMI is now supported
=== Device emulation and assignment ===
==== ACPI ====
==== Audio ====
==== Block devices ====
==== Graphics ====
==== Input devices ====
==== IPMI ====
==== Network devices ====
==== NVDIMM ====
==== NVMe ====
* Add support for mandatory features of version 1.3 of the NVM Express specification
* Add support for the Abort, Asynchronous Event Request and Get Log Page commands
* Add support for Scatter Gather Lists (supported descriptors: Data Block, Bit Bucket, Segment and Last Segment)
* Allow the device to be configured with the "Admin Only" command set
* Support multiple namespaces through the new nvme-ns device
* The unallocated Intel PCI Vendor and Device ID has been replaced with a QEMU allocated "Red Hat" ID
* Support per-namespace SMART log
==== PCI/PCIe ====
==== SCSI ====
==== SD card ====
==== SMBIOS ====
* The OEM Strings data can now be loaded from a file
==== TPM ====
==== USB ====
==== VFIO ====
==== virtio ====
==== Xen ====
==== fw_cfg ====
==== 9pfs ====
* Significant [https://lists.gnu.org/archive/html/qemu-devel/2020-01/msg05539.html performance improvement of Treaddir] requests.
* A performance warning is now logged on host side if 'msize' is set to a very small value, which especially includes Linux 9P clients not having any user specified 'msize' parameter at all. Simply
setting 'msize' (on client/guest side) to any value larger than 8192 will cause the warning to disappear. See [https://wiki.qemu.org/Documentation/9psetup#msize msize documentation] for details.
==== virtiofs ====
* virtiofsd xattrmap option to allow the host to see different xattr names to the guest
* virtiofsd alternate sandbox option for environments where pivot_root isn't available
* virtiofsd 'submount' mechanism (requiring newer guest kernel) allows different host mounts to be seen as separate submounts in the guest, avoiding inode clashes.
==== Semihosting ====
=== Audio ===
=== Character devices ===
* Inverted logic in QAPI handling the "tight" option for abstract UNIX sockets was fixed.
* The QAPI schema now only reports support for abstract UNIX sockets on platforms where it is available (Linux).
=== Crypto subsystem ===
==== experimental qmp interface ====
=== GUI ===
* Spice: add support for SIDE and EXTRA mouse buttons. Improve HiDPI, set physical dimensions of client monitors.
* Build spice and opengl as modules
=== GDBStub ===
=== Host support ===
=== Memory backends ===
=== Migration ===
* A new 'block-bitmap-mapping' migration parameter is added, allowing finer control of which bitmaps to migrate, even when node names differ between source and destination.
* Migration over 'vsock' is now allowed, for nested environments or hosts with hardware that looks like a vsock.
* A new 'calc-dirty-rate'/'query-dirty-rate' call gathers an approximation of the rate at which the guest is dirtying RAM and thus gives an idea about whether precopy migration is likely to proceed.
* The default migration bandwidth has been increased to 1Gbps; users are still encouraged to tune it to their own hardware.
* TLS+multifd is now supported for higher bandwidth encrypted migration.
* Migration with dirty bitmaps has several bugs fixed.
=== Monitor ===
==== QMP ====
* Command block_resize no longer blocks the main loop.
==== HMP ====
* Command block_resize no longer blocks the main loop.
=== Network ===
=== Block device backends and tools ===
* qcow2 files now support extended L2 entries that allow subcluster-based allocation (enable with <code>extended_l2=on</code> when creating the image).
* Using qemu as an NBD client has fewer scenarios where network timeouts stall guest execution
* More explicit errors are reported when use of O_DIRECT fails
* The 'block-export-add' QMP command has been introduced to support qemu-storage-daemon, and replaces the now-deprecated 'nbd-server-add' command.
* The 'vhost-user-blk' export type has been added, allowing qemu-storage-daemon to act as a vhost-user-blk device backend.
* qemu-nbd now supports multiple '-B name' options for exposing multiple dirty bitmaps at once; it also supports a new '-A' option for exposing the new "qemu:allocation-depth" metadata context over
NBD.
=== Tracing ===
* Add support of dtrace backend on macOS
=== Miscellaneous ===
* The roms/edk2 submodule and the bundled edk2 binaries have been updated to [https://bugs.launchpad.net/qemu/+bug/1852196 edk2-stable202008].
== User-mode emulation ==
* ppc64abi32-linux-user is deprecated and only built when explicitly enabled in--target-list
* tilegx-linux-user is deprecated and only built when explicitly enabled in--target-list
* better reporting when we can't mmap the guest_base we want on systems without MAP_FIXED_NOREPLACE
== TCG ==
== Guest agent ==
* New commands: <code>guest-get-devices</code>, <code>guest-get-disks</code> & <code>guest-ssh-{get,add,remove}-authorized-keys</code>
* Support <code>guest-get-fsinfo</code> for non-PCI virtio devices, too
== Build Information ==
* The build system is now partly based on Meson. However, building is still done with ''configure'' and ''make'' as in previous versions of QEMU.
* Binaries for emulators are placed in the root build directory, for example as ''qemu-system-ppc'' instead of ''ppc-softmmu/qemu-system-ppc''. Symbolic links from the old binary are preserved to
simplify the transition.
* In-tree builds are not supported anymore. The build system will try to cater for ''./configure && make && make install'' by building QEMU in a directory named ''build'', but you are encouraged to
switch to out-of-tree builds instead.
* ivshmem-client and ivshmem-server are not installed anymore. They are merely examples, and not to be used in production.
* QEMU installations are now relocatable. For example, if QEMU is configured with ''bindir=/usr/local/bin'' and ''datadir=/usr/local/share'', when QEMU is launched as
''/opt/local/qemu-5.2/bin/qemu-system-x86_64'' it will look automatically for data files in ''/opt/local/qemu-5.2/share''. Note that directories configured outside the prefix (as is often the case
for ''/etc'' and ''/var'') will not be relocated! Previously this was done only under Windows and only for emulators.
=== Python ===
* Python 3.6 or newer is now required to build QEMU.
=== GIT submodules ===
=== Container Based Builds ===
* All Debian 9 based cross-compiler containers have been updated to Debian 10
=== Build Dependencies ===
* Ninja 1.7 or newer is now required to build QEMU:
* '''$ apt-get install ninja-build''' (Debian/Ubuntu and derivative distros)
* '''$ dnf/yum install ninja-build''' (RHEL/Fedora/CentOS and derivative distros)
* '''$ brew install ninja''' (macOS with HomeBrew)
* '''$ pkg install ninja''' (FreeBSD)
=== Windows ===
* qemu-nbd is now built on mingw, and works for simple cases even if it can't duplicate the full functionality available on Unix systems
=== Testing and CI ===
* a new script can wait on gitlab to finish with a pass/fail status (scripts/ci/gitlab-status)
diffstat:
emulators/qemu/Makefile | 20 +-
emulators/qemu/PLIST | 32 +-
emulators/qemu/distinfo | 35 +-
emulators/qemu/patches/patch-Makefile | 12 -
emulators/qemu/patches/patch-accel_stubs_Makefile.objs | 14 -
emulators/qemu/patches/patch-accel_stubs_nvmm-stub.c | 50 -
emulators/qemu/patches/patch-capstone_Makefile | 17 -
emulators/qemu/patches/patch-configure | 121 -
emulators/qemu/patches/patch-default-configs-mips-softmmu-common.mak | 12 -
emulators/qemu/patches/patch-hw-mips-Kconfig | 14 +-
emulators/qemu/patches/patch-hw-mips-Makefiles.objs | 12 -
emulators/qemu/patches/patch-hw-mips-mipssim.c | 73 +-
emulators/qemu/patches/patch-hw_display_tcx.c | 54 -
emulators/qemu/patches/patch-hw_mips_meson.build | 13 +
emulators/qemu/patches/patch-hw_pci-host_sabre.c | 16 -
emulators/qemu/patches/patch-hw_usb_dev-mtp.c | 12 +-
emulators/qemu/patches/patch-include_sysemu_hw__accel.h | 55 -
emulators/qemu/patches/patch-include_sysemu_nvmm.h | 42 -
emulators/qemu/patches/patch-meson.build | 16 +
emulators/qemu/patches/patch-qemu-options.hx | 42 -
emulators/qemu/patches/patch-roms_u-boot-sam460ex_Makefile | 32 -
emulators/qemu/patches/patch-softmmu_cpus.c | 92 -
emulators/qemu/patches/patch-target_i386_Makefile.objs | 14 -
emulators/qemu/patches/patch-target_i386_helper.c | 15 -
emulators/qemu/patches/patch-target_i386_nvmm-all.c | 1233 ----------
25 files changed, 144 insertions(+), 1904 deletions(-)
diffs (truncated from 2371 to 300 lines):
diff -r d54acecc601c -r fb1237c6c780 emulators/qemu/Makefile
--- a/emulators/qemu/Makefile Sat Feb 20 22:56:33 2021 +0000
+++ b/emulators/qemu/Makefile Sat Feb 20 22:59:29 2021 +0000
@@ -1,7 +1,6 @@
-# $NetBSD: Makefile,v 1.262 2021/02/17 17:16:00 reinoud Exp $
+# $NetBSD: Makefile,v 1.263 2021/02/20 22:59:29 ryoon Exp $
-DISTNAME= qemu-5.1.0
-PKGREVISION= 13
+DISTNAME= qemu-5.2.0
CATEGORIES= emulators
MASTER_SITES= https://download.qemu.org/
EXTRACT_SUFX= .tar.xz
@@ -26,6 +25,7 @@
SUBST_STAGE.sphinx-build= pre-configure
SUBST_MESSAGE.sphinx-build= Fix hardcoded sphinx-build
SUBST_FILES.sphinx-build+= configure
+SUBST_FILES.sphinx-build+= docs/meson.build
SUBST_FILES.sphinx-build+= roms/skiboot/doc/Makefile
SUBST_FILES.sphinx-build+= roms/u-boot/Documentation/Makefile
SUBST_SED.sphinx-build+= -e 's/sphinx-build/sphinx-build-${PYVERSSUFFIX}/g'
@@ -61,7 +61,6 @@
NOT_PAX_MPROTECT_SAFE+= bin/qemu-system-cris
NOT_PAX_MPROTECT_SAFE+= bin/qemu-system-hppa
NOT_PAX_MPROTECT_SAFE+= bin/qemu-system-i386
-NOT_PAX_MPROTECT_SAFE+= bin/qemu-system-lm32
NOT_PAX_MPROTECT_SAFE+= bin/qemu-system-m68k
NOT_PAX_MPROTECT_SAFE+= bin/qemu-system-microblaze
NOT_PAX_MPROTECT_SAFE+= bin/qemu-system-microblazeel
@@ -82,15 +81,12 @@
NOT_PAX_MPROTECT_SAFE+= bin/qemu-system-sparc
NOT_PAX_MPROTECT_SAFE+= bin/qemu-system-sparc64
NOT_PAX_MPROTECT_SAFE+= bin/qemu-system-tricore
-NOT_PAX_MPROTECT_SAFE+= bin/qemu-system-unicore32
NOT_PAX_MPROTECT_SAFE+= bin/qemu-system-x86_64
NOT_PAX_MPROTECT_SAFE+= bin/qemu-system-xtensa
NOT_PAX_MPROTECT_SAFE+= bin/qemu-system-xtensaeb
PKG_SYSCONFSUBDIR= qemu
-REPLACE_PERL+= scripts/texi2pod.pl
-
INSTALLATION_DIRS= ${PKGMANDIR}/man1 share/doc/qemu
UE_ARCHS+= aarch64 aarch64_be
@@ -146,6 +142,14 @@
cp ${WRKDIR}/palcode-clipper ${WRKSRC}/pc-bios/palcode-clipper
cp ${FILESDIR}/hw-mips-mipssim_virtio.c ${WRKSRC}/hw/mips/mipssim_virtio.c
+do-build:
+ cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} \
+ ninja -j ${_MAKE_JOBS_N:U1} -C build
+
+do-install:
+ cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${INSTALL_ENV} \
+ ninja -j ${_MAKE_JOBS_N:U1} -C build install
+
# Some dependencies aren't correct and this tries to be re-made on install,
# failing due to configure bugs.
post-build:
@@ -167,6 +171,7 @@
.include "../../archivers/lzo/buildlink3.mk"
.include "../../devel/glib2/buildlink3.mk"
.include "../../devel/jemalloc/buildlink3.mk"
+.include "../../devel/ncursesw/buildlink3.mk"
.include "../../devel/snappy/buildlink3.mk"
.include "../../devel/zlib/buildlink3.mk"
.include "../../graphics/hicolor-icon-theme/buildlink3.mk"
@@ -176,7 +181,6 @@
.include "../../security/libgcrypt/buildlink3.mk"
.include "../../www/curl/buildlink3.mk"
.include "../../x11/pixman/buildlink3.mk"
-.include "../../mk/curses.buildlink3.mk"
.include "../../mk/jpeg.buildlink3.mk"
.include "../../mk/pthread.buildlink3.mk"
.include "../../mk/bsd.pkg.mk"
diff -r d54acecc601c -r fb1237c6c780 emulators/qemu/PLIST
--- a/emulators/qemu/PLIST Sat Feb 20 22:56:33 2021 +0000
+++ b/emulators/qemu/PLIST Sat Feb 20 22:59:29 2021 +0000
@@ -1,4 +1,4 @@
-@comment $NetBSD: PLIST,v 1.69 2020/08/14 06:08:11 tnn Exp $
+@comment $NetBSD: PLIST,v 1.70 2021/02/20 22:59:29 ryoon Exp $
bin/elf2dmp
${PLIST.ivshmem}bin/ivshmem-client
${PLIST.ivshmem}bin/ivshmem-server
@@ -47,7 +47,6 @@
bin/qemu-system-cris
bin/qemu-system-hppa
bin/qemu-system-i386
-bin/qemu-system-lm32
bin/qemu-system-m68k
bin/qemu-system-microblaze
bin/qemu-system-microblazeel
@@ -69,7 +68,6 @@
bin/qemu-system-sparc
bin/qemu-system-sparc64
bin/qemu-system-tricore
-bin/qemu-system-unicore32
bin/qemu-system-x86_64
bin/qemu-system-xtensa
bin/qemu-system-xtensaeb
@@ -89,6 +87,7 @@
man/man7/qemu-qmp-ref.7
man/man8/qemu-ga.8
man/man8/qemu-nbd.8
+man/man8/qemu-pr-helper.8
share/applications/qemu.desktop
share/doc/qemu/Makefile.multinode-NetBSD
share/doc/qemu/index.html
@@ -116,10 +115,8 @@
share/doc/qemu/interop/objects.inv
share/doc/qemu/interop/pr-helper.html
share/doc/qemu/interop/qemu-ga-ref.html
-share/doc/qemu/interop/qemu-ga-ref.txt
share/doc/qemu/interop/qemu-ga.html
share/doc/qemu/interop/qemu-qmp-ref.html
-share/doc/qemu/interop/qemu-qmp-ref.txt
share/doc/qemu/interop/search.html
share/doc/qemu/interop/searchindex.js
share/doc/qemu/interop/vhost-user-gpu.html
@@ -145,6 +142,7 @@
share/doc/qemu/specs/genindex.html
share/doc/qemu/specs/index.html
share/doc/qemu/specs/objects.inv
+share/doc/qemu/specs/ppc-spapr-numa.html
share/doc/qemu/specs/ppc-spapr-xive.html
share/doc/qemu/specs/ppc-xive.html
share/doc/qemu/specs/search.html
@@ -176,19 +174,26 @@
share/doc/qemu/system/arm/musca.html
share/doc/qemu/system/arm/musicpal.html
share/doc/qemu/system/arm/nseries.html
+share/doc/qemu/system/arm/nuvoton.html
share/doc/qemu/system/arm/orangepi.html
share/doc/qemu/system/arm/palm.html
+share/doc/qemu/system/arm/raspi.html
share/doc/qemu/system/arm/realview.html
+share/doc/qemu/system/arm/sbsa.html
share/doc/qemu/system/arm/stellaris.html
share/doc/qemu/system/arm/sx1.html
share/doc/qemu/system/arm/versatile.html
share/doc/qemu/system/arm/vexpress.html
share/doc/qemu/system/arm/virt.html
+share/doc/qemu/system/arm/xlnx-versal-virt.html
share/doc/qemu/system/arm/xscale.html
share/doc/qemu/system/build-platforms.html
+share/doc/qemu/system/cpu-hotplug.html
share/doc/qemu/system/deprecated.html
share/doc/qemu/system/gdb.html
share/doc/qemu/system/genindex.html
+share/doc/qemu/system/i386/microvm.html
+share/doc/qemu/system/i386/pc.html
share/doc/qemu/system/images.html
share/doc/qemu/system/index.html
share/doc/qemu/system/invocation.html
@@ -201,11 +206,13 @@
share/doc/qemu/system/mux-chardev.html
share/doc/qemu/system/net.html
share/doc/qemu/system/objects.inv
+share/doc/qemu/system/pr-manager.html
share/doc/qemu/system/qemu-block-drivers.html
share/doc/qemu/system/qemu-cpu-models.html
share/doc/qemu/system/qemu-manpage.html
share/doc/qemu/system/quickstart.html
share/doc/qemu/system/s390x/3270.html
+share/doc/qemu/system/s390x/bootdevices.html
share/doc/qemu/system/s390x/css.html
share/doc/qemu/system/s390x/protvirt.html
share/doc/qemu/system/s390x/vfio-ap.html
@@ -227,6 +234,8 @@
share/doc/qemu/system/targets.html
share/doc/qemu/system/tls.html
share/doc/qemu/system/usb.html
+share/doc/qemu/system/virtio-net-failover.html
+share/doc/qemu/system/virtio-pmem.html
share/doc/qemu/system/vnc-security.html
share/doc/qemu/tools/.buildinfo
share/doc/qemu/tools/_static/alabaster.css
@@ -249,6 +258,7 @@
share/doc/qemu/tools/objects.inv
share/doc/qemu/tools/qemu-img.html
share/doc/qemu/tools/qemu-nbd.html
+share/doc/qemu/tools/qemu-pr-helper.html
share/doc/qemu/tools/qemu-trace-stap.html
share/doc/qemu/tools/search.html
share/doc/qemu/tools/searchindex.js
@@ -363,13 +373,14 @@
share/qemu/linuxboot.bin
share/qemu/linuxboot_dma.bin
share/qemu/multiboot.bin
+share/qemu/npcm7xx_bootrom.bin
share/qemu/openbios-ppc
share/qemu/openbios-sparc32
share/qemu/openbios-sparc64
-share/qemu/opensbi-riscv32-sifive_u-fw_jump.bin
-share/qemu/opensbi-riscv32-virt-fw_jump.bin
-share/qemu/opensbi-riscv64-sifive_u-fw_jump.bin
-share/qemu/opensbi-riscv64-virt-fw_jump.bin
+share/qemu/opensbi-riscv32-generic-fw_dynamic.bin
+share/qemu/opensbi-riscv32-generic-fw_dynamic.elf
+share/qemu/opensbi-riscv64-generic-fw_dynamic.bin
+share/qemu/opensbi-riscv64-generic-fw_dynamic.elf
share/qemu/palcode-clipper
share/qemu/petalogix-ml605.dtb
share/qemu/petalogix-s3adsp1800.dtb
@@ -380,6 +391,7 @@
share/qemu/pxe-pcnet.rom
share/qemu/pxe-rtl8139.rom
share/qemu/pxe-virtio.rom
+share/qemu/qboot.rom
share/qemu/qemu-nsis.bmp
share/qemu/qemu_vga.ndrv
share/qemu/s390-ccw.img
@@ -399,5 +411,3 @@
share/qemu/vgabios-virtio.bin
share/qemu/vgabios-vmware.bin
share/qemu/vgabios.bin
-@pkgdir var/run
-@pkgdir include
diff -r d54acecc601c -r fb1237c6c780 emulators/qemu/distinfo
--- a/emulators/qemu/distinfo Sat Feb 20 22:56:33 2021 +0000
+++ b/emulators/qemu/distinfo Sat Feb 20 22:59:29 2021 +0000
@@ -1,42 +1,32 @@
-$NetBSD: distinfo,v 1.169 2021/02/17 17:16:00 reinoud Exp $
+$NetBSD: distinfo,v 1.170 2021/02/20 22:59:29 ryoon Exp $
SHA1 (palcode-clipper) = e25ae10a10e0801e47b62b9ee2d10c8ccb4ee940
RMD160 (palcode-clipper) = a637f1cc38dabfdff36e3f02b6dd02d7c63cb8db
SHA512 (palcode-clipper) = 8d6966e59b59bc17c563bae3648af4ac99108990294edd0398ee91d8e61ec8f890608b9326b175d6a3a5668106b67b019a2c51b79f5b2935d4a516d34490056c
Size (palcode-clipper) = 156704 bytes
-SHA1 (qemu-5.1.0.tar.xz) = 8c70ce2b65349e9b42bd20c9dec2c90f8e7b960a
-RMD160 (qemu-5.1.0.tar.xz) = f5e4a20c481d7e2bf822bf6bf41667b810c3cecd
-SHA512 (qemu-5.1.0.tar.xz) = e213edb71d93d5167ddce7546220ecb7b52a7778586a4f476f65bd1e510c9cfc6d1876238a7b501d9cc3fd31cc2ae4b7fb9e753bc3f12cc17cd16dfce2a96ba3
-Size (qemu-5.1.0.tar.xz) = 62911540 bytes
-SHA1 (patch-Makefile) = c5630f4221bbc9f96e04335c907ceea555b7eb26
-SHA1 (patch-accel_stubs_Makefile.objs) = 5ecdbb83e446dcbba74e1f6cf2c098e7818c0809
-SHA1 (patch-accel_stubs_nvmm-stub.c) = d66d47eabb8bb6728e777da7589b43d491adbcc8
+SHA1 (qemu-5.2.0.tar.xz) = 146578267387e301423502d19024f8ffe35ab332
+RMD160 (qemu-5.2.0.tar.xz) = 2c33e773f012e333f99237e3d4ff1653ea0bc88f
+SHA512 (qemu-5.2.0.tar.xz) = bddd633ce111471ebc651e03080251515178808556b49a308a724909e55dac0be0cc0c79c536ac12d239678ae94c60100dc124be9b9d9538340c03a2f27177f3
+Size (qemu-5.2.0.tar.xz) = 106902800 bytes
SHA1 (patch-backends_tpm_tpm__ioctl.h) = fbd6c877ad605f7120290efbb0ac653c69f351de
-SHA1 (patch-capstone_Makefile) = f59870031de8c4385a591362749ec82f57fd4c27
-SHA1 (patch-configure) = 2f5689b83b58066865598a83d53be2de6b42e303
SHA1 (patch-contrib_ivshmem-client_ivshmem-client.c) = 40c8751607cbf66a37e4c4e08f2664b864e2e984
SHA1 (patch-contrib_ivshmem-server_ivshmem-server.c) = d8f53432b5752f4263dc4ef96108a976a05147a3
-SHA1 (patch-default-configs-mips-softmmu-common.mak) = 00d6a6e2dfc590b7e4883ed122964292d667e332
-SHA1 (patch-hw-mips-Kconfig) = 359de9f0c16543f58ba9741e4f05417ad6a9f86e
-SHA1 (patch-hw-mips-Makefiles.objs) = c9d523b9310970df27d02c766225f7c22d71ae08
-SHA1 (patch-hw-mips-mipssim.c) = 7c1ad117214fe130faa95c08f25b4545ee8fe0ab
+SHA1 (patch-hw-mips-Kconfig) = c7199ad26ac45116ab4d38252db4234ae93bdf9a
+SHA1 (patch-hw-mips-mipssim.c) = f701897f2c2bee4a8c3fa5222903789f991a663a
SHA1 (patch-hw_alpha_alpha_sys.h) = 5908698208937ff9eb0bf1c504e1144af3d1bcc4
SHA1 (patch-hw_alpha_dp264.c) = 856304784f098863728ecac3d0a9287aa22190d7
SHA1 (patch-hw_alpha_typhoon.c) = 1bed5cd6f355c4163585c5331356ebf38c5c3a16
SHA1 (patch-hw_core_uboot__image.h) = 17eef02349343c5fcfb7a4069cb6f8fd11efcb59
SHA1 (patch-hw_display_omap__dss.c) = 6b13242f28e32346bc70548c216c578d98fd3420
-SHA1 (patch-hw_display_tcx.c) = 58f6c90bda734ec83b702b1b13d24c3e3219c7bd
+SHA1 (patch-hw_mips_meson.build) = 4d1ed1ae2dbfb3edfe5fa5271c4561531b08efee
SHA1 (patch-hw_net_etraxfs__eth.c) = e5dd1661d60dbcd27b332403e0843500ba9544bc
SHA1 (patch-hw_net_xilinx__axienet.c) = ebcd2676d64ce6f31e4a8c976d4fdf530ad5e8b7
-SHA1 (patch-hw_pci-host_sabre.c) = 75c076757ed96fc9f89cb0159f00c6cedcb39a27
SHA1 (patch-hw_rtc_mc146818rtc.c) = cc7a3b28010966b65b7a16db756226ac2669f310
SHA1 (patch-hw_scsi_scsi-disk.c) = fdbf2f962a6dcb1a115a7f8a5b8790ff9295fb33
-SHA1 (patch-hw_usb_dev-mtp.c) = 0f9034fb3904e5d5e3b98d24b94e054181687d95
-SHA1 (patch-include_sysemu_hw__accel.h) = 852bc031a1e065f614c5c913351f3e13183e00b7
+SHA1 (patch-hw_usb_dev-mtp.c) = 94ddf53a41cc75810cfece1b8aef1831fab4ce43
SHA1 (patch-include_sysemu_kvm.h) = 9847abe3be70bd708a521310f5d5515e45a1a5a0
-SHA1 (patch-include_sysemu_nvmm.h) = 3bd3da9b42ace0f806fabeb580f90ae19c273869
+SHA1 (patch-meson.build) = 5f9e00312b2dc6a6b1c43b1f28d092e69b09091d
SHA1 (patch-net_tap-solaris.c) = cc953c9a624dd55ace4e130d0b31bbfb956c17d5
-SHA1 (patch-qemu-options.hx) = e2f264117f703aa4ccf56219f370c3b1303e8b07
SHA1 (patch-roms_qemu-palcode_hwrpb.h) = ae7b4c0680367af6f740d62a54dc86352128d76f
SHA1 (patch-roms_qemu-palcode_init.c) = 7a0ebcd86f4106318791e7d90273fb55a424f1b8
SHA1 (patch-roms_qemu-palcode_memcpy.c) = 7761774ae9092d0f494deaf302d663ba479a09cf
@@ -48,11 +38,6 @@
SHA1 (patch-roms_qemu-palcode_protos.h) = 60cf9db5544cb842207a893a78fa6bbe45af4c71
SHA1 (patch-roms_qemu-palcode_sys-clipper.h) = 8983d7072b1c1e66bf0a18d2e49e503745692a46
SHA1 (patch-roms_qemu-palcode_vgaio.c) = c8d7adc053cd6655f005527d16647611040c09d2
-SHA1 (patch-roms_u-boot-sam460ex_Makefile) = e43111db0c56625bc8df5e3688c242c341f3fa6a
SHA1 (patch-roms_u-boot_tools_imx8m__image.sh) = e4c452062f40569e33aa93eec4a65bd3af2e74fc
-SHA1 (patch-softmmu_cpus.c) = 489b6ef1a37bb617d50b903dfdd6fb41a302508d
-SHA1 (patch-target_i386_Makefile.objs) = be8ab2e72521ccd0a71db6b37feb9957b27ac970
-SHA1 (patch-target_i386_helper.c) = 54363fe53688ea4030665b3bbb3ee7aba7ba5348
SHA1 (patch-target_i386_kvm-stub.c) = 4cd2b7a8d8d8a317829f982b5acff7fdf2479d9f
-SHA1 (patch-target_i386_nvmm-all.c) = 091c56c88c2366abef907ca99e5bfa9933a2b6ab
SHA1 (patch-target_sparc_translate.c) = 7ec2add2fd808facb48b9a66ccc345599251bf76
diff -r d54acecc601c -r fb1237c6c780 emulators/qemu/patches/patch-Makefile
--- a/emulators/qemu/patches/patch-Makefile Sat Feb 20 22:56:33 2021 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,12 +0,0 @@
-$NetBSD: patch-Makefile,v 1.3 2020/08/12 18:31:27 ryoon Exp $
-
---- Makefile.orig 2020-08-11 19:17:15.000000000 +0000
-+++ Makefile
-@@ -530,6 +530,7 @@ $(TARGET_DIRS_RULES):
- DTC_MAKE_ARGS=-I$(SRC_PATH)/dtc VPATH=$(SRC_PATH)/dtc -C dtc V="$(V)" LIBFDT_lib=""
- DTC_CFLAGS=$(CFLAGS) $(QEMU_CFLAGS)
- DTC_CPPFLAGS=-I$(SRC_PATH)/dtc/libfdt
-+ARFLAGS= -rcs
Home |
Main Index |
Thread Index |
Old Index