[pkgsrc/trunk]: pkgsrc/mk Move all of the code that sets USE_XPKGWEDGE from b...

[jlam <jlam%pkgsrc.org@localhost>]

details:   https://anonhg.NetBSD.org/pkgsrc/rev/43a5f2fac7cf
branches:  trunk
changeset: 466827:43a5f2fac7cf
user:      jlam <jlam%pkgsrc.org@localhost>
date:      Fri Jan 23 17:55:17 2004 +0000

description:
Move all of the code that sets USE_XPKGWEDGE from bsd.pkg.mk into
bsd.prefs.mk as it's needed in setting X11PREFIX to the correct value,
which is also done in bsd.prefs.mk.  This is the follow-through to the
temporary fix in previous revision (1.141) of bsd.prefs.mk.

diffstat:

 mk/bsd.pkg.mk   |  27 +++---------------------
 mk/bsd.prefs.mk |  61 ++++++++++++++++++++++++++++++++++++--------------------
 2 files changed, 43 insertions(+), 45 deletions(-)

diffs (151 lines):

diff -r 3bf969d8d755 -r 43a5f2fac7cf mk/bsd.pkg.mk
--- a/mk/bsd.pkg.mk     Fri Jan 23 17:54:48 2004 +0000
+++ b/mk/bsd.pkg.mk     Fri Jan 23 17:55:17 2004 +0000
@@ -1,4 +1,4 @@
-#      $NetBSD: bsd.pkg.mk,v 1.1353 2004/01/23 17:04:55 jmmv Exp $
+#      $NetBSD: bsd.pkg.mk,v 1.1354 2004/01/23 17:55:17 jlam Exp $
 #
 # This file is in the public domain.
 #
@@ -169,28 +169,6 @@
 USE_X11?=              implied
 .endif
 
-# If xpkgwedge.def is found, then we need to require xpkgwedge as
-# a build dependency for X11 packages.
-#
-.if exists(${LOCALBASE}/lib/X11/config/xpkgwedge.def) ||               \
-    exists(${X11BASE}/lib/X11/config/xpkgwedge.def)
-USE_XPKGWEDGE= yes
-.else
-USE_XPKGWEDGE?=        no
-.endif
-
-.if defined(_OPSYS_NEEDS_XPKGWEDGE) &&                                 \
-    !empty(_OPSYS_NEEDS_XPKGWEDGE:M[yY][eE][sS])
-USE_XPKGWEDGE= yes
-.endif
-
-.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
-USE_XPKGWEDGE=         yes
-_XPKGWEDGE_REQD=       1.9
-.else
-_XPKGWEDGE_REQD=       1.5
-.endif
-
 # Set the PREFIX appropriately.
 .if ${PKG_INSTALLATION_TYPE} == "overwrite"
 .  if defined(USE_X11BASE)
@@ -206,6 +184,9 @@
 NO_MTREE=              yes
 .endif
 
+# If USE_XPKGWEDGE is set, then add a build dependency on xpkgwedge for
+# X11 packages.
+#
 .if defined(USE_X11BASE)
 .  if !empty(USE_XPKGWEDGE:M[yY][eE][sS])
 BUILD_DEPENDS+=                xpkgwedge>=${_XPKGWEDGE_REQD}:../../pkgtools/xpkgwedge
diff -r 3bf969d8d755 -r 43a5f2fac7cf mk/bsd.prefs.mk
--- a/mk/bsd.prefs.mk   Fri Jan 23 17:54:48 2004 +0000
+++ b/mk/bsd.prefs.mk   Fri Jan 23 17:55:17 2004 +0000
@@ -1,4 +1,4 @@
-# $NetBSD: bsd.prefs.mk,v 1.141 2004/01/23 16:49:47 agc Exp $
+# $NetBSD: bsd.prefs.mk,v 1.142 2004/01/23 17:55:17 jlam Exp $
 #
 # Make file, included to get the site preferences, if any.  Should
 # only be included by package Makefiles before any .if defined()
@@ -252,6 +252,17 @@
 PHASES_AFTER_INSTALL=  install ${PHASES_AFTER_PACKAGE}
 PHASES_AFTER_PACKAGE=  package
 
+# Set the style of installation to be performed for the package.  The
+# funky make variable modifiers just select the first word of the value
+# stored in the referenced variable.
+#
+.for _pref_ in ${PKG_INSTALLATION_PREFS}
+.  if !empty(PKG_INSTALLATION_TYPES:M${_pref_})
+PKG_INSTALLATION_TYPE?=        ${PKG_INSTALLATION_TYPES:M${_pref_}:S/^/_pkginsttype_/1:M_pkginsttype_*:S/^_pkginsttype_//}
+.  endif
+.endfor
+PKG_INSTALLATION_TYPE?=        none
+
 # if the system is IPv6-ready, compile with IPv6 support turned on.
 .if defined(USE_INET6)
 .  if empty(USE_INET6:M[Yy][Ee][Ss]) || defined(USE_SOCKS)
@@ -274,6 +285,26 @@
 .endif
 CROSSBASE?=            ${LOCALBASE}/cross
 
+# If xpkgwedge.def is found, then clearly we're using xpkgwedge.
+.if exists(${LOCALBASE}/lib/X11/config/xpkgwedge.def) || \
+    exists(${X11BASE}/lib/X11/config/xpkgwedge.def)
+USE_XPKGWEDGE=  yes
+.else
+USE_XPKGWEDGE?=        no
+.endif
+
+.if defined(_OPSYS_NEEDS_XPKGWEDGE) && \
+    !empty(_OPSYS_NEEDS_XPKGWEDGE:M[yY][eE][sS])
+USE_XPKGWEDGE= yes
+.endif
+
+.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
+USE_XPKGWEDGE=         yes
+_XPKGWEDGE_REQD=       1.9
+.else
+_XPKGWEDGE_REQD=       1.5
+.endif
+
 # Set X11PREFIX to reflect the install directory of X11 packages.
 # Set XMKMF_CMD properly if xpkgwedge is installed.
 #
@@ -282,10 +313,7 @@
 #
 XMKMF?=                        ${XMKMF_CMD} ${XMKMF_FLAGS} -a
 XMKMF_FLAGS?=          # empty
-.if exists(${LOCALBASE}/lib/X11/config/xpkgwedge.def) || \
-    exists(${X11BASE}/lib/X11/config/xpkgwedge.def) || \
-    !empty(USE_XPKGWEDGE:M[Yy][Ee][Ss]) 
-HAVE_XPKGWEDGE=                yes
+.if !empty(USE_XPKGWEDGE:M[Yy][Ee][Ss]) 
 X11PREFIX=             ${LOCALBASE}
 XMKMF_CMD?=            ${X11PREFIX}/bin/pkgxmkmf
 .else
@@ -323,23 +351,6 @@
 MAKEFLAGS+=            DIGEST_VERSION="${DIGEST_VERSION}"
 .endif
 
-# Set the style of installation to be performed for the package.  The
-# funky make variable modifiers just select the first word of the value
-# stored in the referenced variable.
-#
-.for _pref_ in ${PKG_INSTALLATION_PREFS}
-.  if !empty(PKG_INSTALLATION_TYPES:M${_pref_})
-PKG_INSTALLATION_TYPE?=        ${PKG_INSTALLATION_TYPES:M${_pref_}:S/^/_pkginsttype_/1:M_pkginsttype_*:S/^_pkginsttype_//}
-.  endif
-.endfor
-PKG_INSTALLATION_TYPE?=        none
-
-USE_BUILDLINK2?=       no      # default to not using buildlink2
-USE_BUILDLINK3?=       no      # default to not using buildlink3
-.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
-USE_BUILDLINK3=                yes     # pkgviews requires buildlink3
-.endif
-
 # This is the package database directory for the default view.
 PKG_DBDIR?=            ${DESTDIR}/var/db/pkg
 
@@ -397,6 +408,12 @@
 _NULL_SUFFIX=          -s ""
 .endif
 
+USE_BUILDLINK2?=       no      # default to not using buildlink2
+USE_BUILDLINK3?=       no      # default to not using buildlink3
+.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
+USE_BUILDLINK3=                yes     # pkgviews requires buildlink3
+.endif
+
 .if (${OPSYS} == SunOS) && !defined(ZOULARIS_VERSION)
 .  if !exists(${ZOULARISBASE}/share/mk/zoularis.mk)
 ZOULARIS_VERSION=      20000522