[pkgsrc/trunk]: pkgsrc/sysutils/amanda-common Shorten DESCR (still too long, ...

[wiz <wiz%pkgsrc.org@localhost>]

details:   https://anonhg.NetBSD.org/pkgsrc/rev/455f28cc54af
branches:  trunk
changeset: 475288:455f28cc54af
user:      wiz <wiz%pkgsrc.org@localhost>
date:      Thu May 13 13:11:54 2004 +0000

description:
Shorten DESCR (still too long, but better).

diffstat:

 sysutils/amanda-common/DESCR |  149 +------------------------------------------
 1 files changed, 3 insertions(+), 146 deletions(-)

diffs (160 lines):

diff -r 69c057633c13 -r 455f28cc54af sysutils/amanda-common/DESCR
--- a/sysutils/amanda-common/DESCR      Thu May 13 13:10:19 2004 +0000
+++ b/sysutils/amanda-common/DESCR      Thu May 13 13:11:54 2004 +0000
@@ -1,25 +1,6 @@
-Amanda, The Advanced Maryland Automatic Network Disk Archiver
-Copyright (c) 1991-1998 University of Maryland at College Park
-All Rights Reserved.
-
-See the files COPYRIGHT, COPYRIGHT-REGEX and COPYRIGHT-APACHE for
-distribution conditions and official warranty disclaimer.
-
-PLEASE NOTE: THIS SOFTWARE IS BEING MADE AVAILABLE ``AS-IS''. UMD is making
-this work available so that other people can use it.  This software is in
-production use at our home site - the UMCP Department of Computer Science -
-but we make no warranties that it will work for you.  Amanda development is
-unfunded - the development team maintains the code in their spare time.  As a
-result, there is no support available other than users helping each other on
-the Amanda mailing lists.  See below for information on the mailing lists.
-
-
-WHAT IS AMANDA?
----------------
-
-This is a release of Amanda, the Advanced Maryland Automatic
-Network Disk Archiver.  Amanda is a backup system designed to archive many
-computers on a network to a single large-capacity tape drive. 
+This is Amanda, the Advanced Maryland Automatic Network Disk
+Archiver.  Amanda is a backup system designed to archive many
+computers on a network to a single large-capacity tape drive.
 
 Here are some features of Amanda:
 
@@ -55,127 +36,3 @@
     is down in single-user mode (since BSD dump is not reliable on active
     filesystems): Amanda will still do your daily dumps.
   * lots of other options; Amanda is very configurable.
-
-
-WHAT ARE THE SYSTEM REQUIREMENTS FOR AMANDA?
---------------------------------------------
-
-Amanda requires a host that is mostly idle during the time backups are
-done, with a large capacity tape drive (e.g. an EXABYTE, DAT or DLT tape).
-This becomes the "tape server host".  All the computers you are going to dump
-are the "backup client hosts".  The server host can also be a client host.
-
-Amanda works best with one or more large "holding disk" partitions on the
-server host available to it for buffering dumps before writing to tape.
-The holding disk allows Amanda to run backups in parallel to the disk, only
-writing them to tape when the backup is finished.  Note that the holding
-disk is not required: without it Amanda will run backups sequentially to
-the tape drive.  Running it this way kills the great performance, but still
-allows you to take advantage of Amanda's other features.
-
-As a rule of thumb, for best performance the holding disk should be larger
-than the dump output from your largest disk partitions.  For example, if
-you are backing up some full gigabyte disks that compress down to 500 MB,
-then you'll want 500 MB on your holding disk.  On the other hand, if those
-gigabyte drives are partitioned into 500 MB filesystems, they'll probably
-compress down to 250 MB and you'll only need that much on your holding
-disk.  Amanda will perform better with larger holding disks.
-
-Actually, Amanda will still work if you have full dumps that are larger
-than the holding disk: Amanda will send those dumps directly to tape one at
-a time.  If you have many such dumps you will be limited by the dump speed
-of those machines.
-
-Amanda does not yet support single backup images larger than a tape.
-
-
-WHAT SYSTEMS DOES AMANDA RUN ON?
---------------------------------
-
-Amanda should run on any modern Unix system that supports dump or GNU
-tar, has sockets and inetd, and either system V shared memory, or BSD
-mmap implemented.
-
-In particular, Amanda 2.4.1p1 has been compiled, and the client side tested
-on the following systems:
-       AIX 3.2 and 4.1
-       BSDI BSD/OS 2.1 and 3.1
-       DEC OSF/1 3.2 and 4.0
-       FreeBSD 2.2.5
-       IRIX 5.2 and 6.3
-       GNU/Linux on x86, alpha, sparc, arm and powerpc
-       NetBSD 1.0
-       Nextstep 3 (*)
-       OpenBSD 2.5 x86, sparc, etc (ports available)
-       SunOS 4.1.x (x >= 1) and 5.[567]
-       Ultrix 4.2
-       HP-UX 9.x and 10.x (x >= 01)
-
-The Amanda 2.4.1p1 server side is known to run on all of the other
-machines except on those marked with an asterisk.
-
-If you know of any system that is not listed here on which amanda
-builds successfully, either client&server or client-only, please
-report to amanda-hackers%amanda.org@localhost.
-
-
-WHERE DO I GET AMANDA?
-----------------------
-
-There are several versions of Amanda.  The latest version at the time
-of this writing is available at:
-
-       ftp://ftp.amanda.org/pub/amanda
-
-
-HOW DO I GET AMANDA UP AND RUNNING?
------------------------------------
-
-Read the file docs/INSTALL.  There are a variety of steps, from compiling
-Amanda to installing it on the tape server host and the client machines.
-    docs/INSTALL       contains general installation instructions.
-    docs/SYSTEM.NOTES  contains system-specific information.
-    docs/FAQ            contains answers to frequently asked questions.
-    docs/KERBEROS      explains installation under Kerberos 4.
-    docs/TAPE.CHANGERS explains how to customize the changer interface.
-    docs/WHATS.NEW     details new features.
-
-
-WHO DO I TALK TO IF I HAVE A PROBLEM?
--------------------------------------
-
-Amanda is completely unsupported and made available as-is.  However,
-you may be able to get useful information in the Amanda mailing lists:
-
-==> To join a mailing list, DO NOT, EVER, send mail to that list.  Send
-    mail to <listname>-request%amanda.org@localhost, or amanda-lists%amanda.org@localhost,
-    with the following line in the body of the message:
-       subscribe <listname> <your-email-address>
-
-
-    amanda-announce
-        The amanda-announce mailing list is for important announcements
-        related to the Amanda Network Backup Manager package, including new
-        versions, contributions, and fixes.  NOTE: the amanda-users list is
-        itself on the amanda-announce distribution, so you only need to
-        subscribe to one of the two lists, not both.
-       To subscribe, send a message to amanda-announce-request%amanda.org@localhost.
-
-    amanda-users
-        The amanda-users mailing list is for questions and general discussion
-        about the Amanda Network Backup Manager.  This package and related
-        files are available via anonymous FTP from ftp.amanda.org in the
-        pub/amanda directory.  NOTE: the amanda-users list is itself on the
-        amanda-announce distribution, so you only need to subscribe to one of
-        the two lists, not both.
-       To subscribe, send a message to amanda-users-request%amanda.org@localhost.
-
-    amanda-hackers
-        The amanda-hackers mailing list is for discussion of the
-        technical details of the Amanda package, including extensions,
-        ports, bugs, fixes, and alpha testing of new versions.
-       To subscribe, send a message to amanda-hackers-request%amanda.org@localhost.
-
-
-Share and Enjoy,
-The Amanda Development Team