[pkgsrc/trunk]: pkgsrc/net Update to version 4.10

[salo <salo%pkgsrc.org@localhost>]

details:   https://anonhg.NetBSD.org/pkgsrc/rev/bcb3d91d4c8b
branches:  trunk
changeset: 514642:bcb3d91d4c8b
user:      salo <salo%pkgsrc.org@localhost>
date:      Thu Jun 15 15:24:23 2006 +0000

description:
Update to version 4.10

Changes:

4.10:
=====
- Updated nmap-mac-prefixes to reflect the latest OUI DB from the IEEE
  (http://standards.ieee.org/regauth/oui/oui.txt) as of May 31, 2006.
  Also added a couple unregistered OUI's (for QEMU and Bochs)
  suggested by Robert Millan (rmh(a)aybabtu.com).

- Fixed a bug which could cause false öpen" ports when doing a UDP
  scan of localhost. This usually only happened when you scan tens of
  thousands of ports (e.g. -p- option).

- Fixed a bug in service detection which could lead to a crash when
  "--version-intensity 0" was used with a UDP scan.  Thanks to Makoto
  Shiotsuki (shio(a)st.rim.or.jp) for reporting the problem and Doug
  Hoyte for producing a patch.

- Made some AIX and HP-UX portability fixes to Libdnet and NmapFE.
  These were sent in by Peter O'Gorman
  (nmap-dev(a)mlists.thewrittenword.com).

- When you do a UDP«CP scan, the TCP ports are now shown first (in
  numerical order), followed by the UDP ports (also in order).  This
  contrasts with the old format which showed all ports together in
  numerical order, regardless of protocol.  This was at first a "bug",
  but then I started thinking this behavior may be better.  If you
  have a preference for one format or the other, please post your
  reasons to nmap-dev.

- Changed mass_dns system to print a warning if it can't find any
  available DNS servers, but not quit like it used to.  Thanks to Doug
  Hoyte for the patch.

4.04BETA1:
==========
- Integrated all of your submissions (about a thousand) from the first
  quarter of this year!  Please keep 'em coming!  The DB has increased
  from 3,153 signatures representing 381 protocols in 4.03 to 3,441
  signatures representing 401 protocols.  No other tool comes close!
  Many of the already existing match lines were improved too.  Thanks
  to Version Detection Czar Doug Hoyte for doing this.

- Nmap now allows multiple ingored port states.  If a 65K-port scan
  had, 64K filtered ports, 1K closed ports, and a few dozen open
  ports, Nmap used to list the dozen open ones among a thousand lines
  of closed ports.  Now Nmap will give reports like "Not shown: 64330
  filtered ports, 1000 closed ports" or "All 2051 scanned ports on
  192.168.0.69 are closed (1051) or filtered (1000)", and omit all of
  those ports from the table.  Open ports are never ignored.  XML
  output can now have multiple <extraports> directive (one for each
  ignored state).  The number of ports in a single state before it is
  consolidated defaults to 26 or more, though that number increases as
  you add -v or -d options.  With -d3 or higher, no ports will be
  consolidated.  The XML output should probably be augmented to give
  the extraports directive 'ip', 'tcp', and 'udp' attributes which
  specify the corresponding port numbers in the given state in the
  same listing format as the nmaprun.scaninfo.services attribute, but
  that part hasn't yet been implemented.  If you absoultely need the
  exact port numbers for each state in the XML, use -d3 for now.

- Nmap now ignores certain ICMP error message rate limiting (rather
  than slowing down to accomidate it) in cases such as SYN scan where
  an ICMP message and no response mean the same thing (port filtered).
  This is currently only done at timing level Aggressive (-T4) or
  higher, though we may make it the default if we don't hear problems
  with it.  In addition, the --defeat-rst-ratelimit option has been
  added, which causes Nmap not to slow down to accomidate RST rate
  limits when encountered.  For a SYN scan, this may cause closed
  ports to be labeled 'filtered' becuase Nmap refused to slow down
  enough to correspond to the rate limiting.  Learn more about this
  new option at http://www.insecure.org/nmap/man/ .  Thanks to Martin
  Macok (martin.macok(a)underground.cz) for writing the patch that
  these changes were based on.

- Moved my Nmap development environment to Visual C++ 2005 Express
  edition.  In typical "MS Upgrade Treadmill" fashion, Visual Studio
  2003 users will no longer be able to compile Nmap using the new
  solution files.  The compilation, installation, and execution
  instructions at
  http://www.insecure.org/nmap/install/inst-windows.html have been
  upgraded.

- Automated my Windows build system so that I just have to type a
  single make command in the mswin32 directory.  Thanks to Scott
  Worley (smw(a)pobox.com>, Shane & Jenny Walters
  (yfisaqt(a)waltersinamerica.com), and Alex Prinsier
  (aphexer(a)mailhaven.com) for reading my appeal in the 4.03
  CHANGELOG and assisting.

- Changed the PortList class to use much more efficient data
  structures and algorithms which take advantage of Nmap-specific
  behavior patterns.  Thanks to Marek Majkowski
  (majek(a)forest.one.pl) for the patch.

- Fixed a bug which prevented certain TCPÙDP scan commands, such as
  "nmap -sSU -p1-65535 localhost" from scanning both TCP and UDP.
  Instead they gave the error message "WARNING: UDP scan was requested,
  but no udp ports were specified.  Skipping this scan type".  Thanks to
  Doug Hoyte for the patch.

- Nmap has traditionally required you to specify -T* timing options
  before any more granular options like --max-rtt-timeout, otherwise the
  general timing option would overwrite the value from your more
  specific request.  This has now been fixed so that the more specific
  options always have precendence.  Thanks to Doug Hoyte for this patch.

- Fixed a couple possible memory leaks reported by Ted Kremenek
 (kremenek(a)cs.stanford.edu) from the Stanford University sofware
 static analysis lab ("Checker" project).

- Nmap now prints a warning when you specify a target name which
  resolves to multiple IP addresses.  Nmap proceeds to scan only the
  first of those addresses (as it always has done).  Thanks to Doug
  Hoyte for the patch.  The warning looks like this:
  Warning: Hostname google.com resolves to 3 IPs. Using 66.102.7.99.

- Disallow --host-timeout values of less than 1500ms, print a warning
  for values less than 15s.

- Changed all instances of inet_aton() into calls to inet_pton()
  instead.  This allowed us to remove inet_aton.c from nbase.  Thanks to
  KX (kxmail(a)gmail.com) for the patch.

- When debugging (-d) is specified, Nmap now prints a report on the
  timing variables in use.  Thanks to Doug Hoyte for the patch.  The
  report loos like this:
  ---------- Timing report ----------
    hostgroups: min 1, max 100000
    rtt-timeouts: init 250, min 50, max 300
    scan-delay: TCP 5, UDP 1000
    parallelism: min 0, max 0
    max-retries: 2, host-timeout 900000
  -----------------------------------

- Modified the WinPcap installer file to explicitly uninstall an
  existing WinPcap (if you select that you wish to replace it) rather
  than just overwriting the old version.  Thanks to Doug Hoyte for
  making this change.

- Added some P2P application ports to the nmap-services file.  Thanks
  to Martin Macok for the patch.

- The write buffer length increased in 4.03 was increased even further
  when the debugging or verbosity levels are more than 2 (e.g. -d3).
  Thanks to Brandon Enright (bmenrigh(a)ucsd.edu) for the patch.  The
  goal is to prevent you from ever seeing the fatal error:
  "log_vwrite: write buffer not large enough -- need to increase"

- Added a note to the Nmap configure dragon that people sick of him
  can submit their own ASCII art to nmap-dev%insecure.org@localhost .  If you
  are wondering WTF I am talking about, it is probably because only
  most elite Nmap users -- the ones who compile from source on UNIX --
  get to see the 'l33t ASCII Art.

diffstat:

 net/nmap/Makefile         |   4 ++--
 net/nmap/distinfo         |  10 +++++-----
 net/nmap/patches/patch-aa |   6 +++---
 net/nmapfe/Makefile       |   6 +++---
 4 files changed, 13 insertions(+), 13 deletions(-)

diffs (64 lines):

diff -r 41b333abf414 -r bcb3d91d4c8b net/nmap/Makefile
--- a/net/nmap/Makefile Thu Jun 15 15:20:20 2006 +0000
+++ b/net/nmap/Makefile Thu Jun 15 15:24:23 2006 +0000
@@ -1,7 +1,7 @@
-# $NetBSD: Makefile,v 1.50 2006/04/25 13:43:09 salo Exp $
+# $NetBSD: Makefile,v 1.51 2006/06/15 15:24:23 salo Exp $
 #
 
-DISTNAME=      nmap-4.03
+DISTNAME=      nmap-4.10
 CATEGORIES=    net security
 MASTER_SITES=  http://www.insecure.org/nmap/dist/
 EXTRACT_SUFX=  .tar.bz2
diff -r 41b333abf414 -r bcb3d91d4c8b net/nmap/distinfo
--- a/net/nmap/distinfo Thu Jun 15 15:20:20 2006 +0000
+++ b/net/nmap/distinfo Thu Jun 15 15:24:23 2006 +0000
@@ -1,9 +1,9 @@
-$NetBSD: distinfo,v 1.31 2006/04/25 13:43:09 salo Exp $
+$NetBSD: distinfo,v 1.32 2006/06/15 15:24:23 salo Exp $
 
-SHA1 (nmap-4.03.tar.bz2) = 8c5f1e541647655369497862b360971a8393c59e
-RMD160 (nmap-4.03.tar.bz2) = 9750b91ce1339888e4d18fc08a5927b5c3d38973
-Size (nmap-4.03.tar.bz2) = 2123560 bytes
-SHA1 (patch-aa) = 7e76def6b186d909fb4107170d24d65812e5468f
+SHA1 (nmap-4.10.tar.bz2) = ee63328b3ff02dd75bf3e98a8506ccfdaeeb623b
+RMD160 (nmap-4.10.tar.bz2) = 1d64699b0e42cf38a6b666bf4585223ca87440c6
+Size (nmap-4.10.tar.bz2) = 2130202 bytes
+SHA1 (patch-aa) = 94785ba16d30b607df680d4a272a7bec67b32802
 SHA1 (patch-ab) = ea3fc8ec22a6331a1c2dc512f1d166970beca6c3
 SHA1 (patch-ad) = d54793006dcd446cc973950c9d8a974cb37655d1
 SHA1 (patch-ae) = 9ef870f3961c38c85c558304595df31f2b9d92fd
diff -r 41b333abf414 -r bcb3d91d4c8b net/nmap/patches/patch-aa
--- a/net/nmap/patches/patch-aa Thu Jun 15 15:20:20 2006 +0000
+++ b/net/nmap/patches/patch-aa Thu Jun 15 15:24:23 2006 +0000
@@ -1,10 +1,10 @@
-$NetBSD: patch-aa,v 1.17 2006/04/25 13:43:09 salo Exp $
+$NetBSD: patch-aa,v 1.18 2006/06/15 15:24:24 salo Exp $
 
 --- Makefile.in.orig   2006-04-22 23:52:13.000000000 +0200
 +++ Makefile.in        2006-04-25 14:56:00.000000000 +0200
 @@ -1,4 +1,4 @@
--export NMAP_VERSION = 4.03
-+NMAP_VERSION = 4.03
+-export NMAP_VERSION = 4.10
++NMAP_VERSION = 4.10
  NMAP_NAME= Nmap
  NMAP_URL= http://www.insecure.org/nmap/
  NMAP_PLATFORM=@host@
diff -r 41b333abf414 -r bcb3d91d4c8b net/nmapfe/Makefile
--- a/net/nmapfe/Makefile       Thu Jun 15 15:20:20 2006 +0000
+++ b/net/nmapfe/Makefile       Thu Jun 15 15:24:23 2006 +0000
@@ -1,9 +1,9 @@
-# $NetBSD: Makefile,v 1.40 2006/04/25 13:43:09 salo Exp $
+# $NetBSD: Makefile,v 1.41 2006/06/15 15:24:24 salo Exp $
 #
 
-DISTNAME=      nmap-4.03
+DISTNAME=      nmap-4.10
 PKGNAME=       nmapfe-0.9.5
-PKGREVISION=   28
+PKGREVISION=   29
 CATEGORIES=    net security
 MASTER_SITES=  http://www.insecure.org/nmap/dist/
 EXTRACT_SUFX=  .tar.bz2