pkgsrc-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[pkgsrc/trunk]: pkgsrc/devel/guile-www Update to 2.35.
details: https://anonhg.NetBSD.org/pkgsrc/rev/f33f929dcaf6
branches: trunk
changeset: 610788:f33f929dcaf6
user: gdt <gdt%pkgsrc.org@localhost>
date: Wed Nov 07 00:50:05 2012 +0000
description:
Update to 2.35.
- 2.35 | 2012-11-06
- support for "make installcheck"
This does "make check" at its core, so the same env vars apply.
Obviously, you should do "make install" first for sane results.
- ‘receive-response’ spec takes thunk for ‘custom’ handling
This means that instead of using:
(list 'custom (values P1 P2 P3 P4))
to construct a ‘receive-response’ spec, you can use:
(list 'custom (lambda () (values P1 P2 P3 P4)))
In fact, this is now the preferred way, as support for using
‘values’ directly is now deemed a misfeature and marked for
eventual removal (see below).
- tested against Guile 2.0.6
There are some deprecation warnings, however.
- MARKED FOR REMOVAL
- 2013-05-15 support for values in ‘receive-response’ spec
Out of an explicit ‘call-with-values’ context, Guile 2.x will
silently discard all values but the first if the continuation
expects one value only (the common case).
(cons 0 (values 1 2)) => (0 . 1)
Thus, the ‘receive-response’ spec constructed by:
(list 'custom (values P1 P2 P3 P4))
fails to preserve P2, P3, P4 (w/ Guile 2.x). See above for
thunk support, the future-proof way to specify ‘custom’ procs.
- bootstrap tools upgrade
- GNU Autoconf 2.69
- GNU Automake 1.12.4
- Guile-BAUX 20121026.1208.c21074a
- 2.34 | 2012-03-29
- bug fix: unbotch ‘upath->filename-proc’
- bug fix: unbotch ‘log-http-response-proc’
In Guile-WWW 2.33 (2012-02-29), these procs were changed to use
(ice-9 optargs), but the change was botched.
- bug fix: ‘(www http) http:post-form’ reserves ‘#\&’ and ‘#\=’
That is, in the absense of upload specs, the urlencoding for the
key names and values now also includes ampersand and equal sign,
as those used to delimit pairs and separate key and value within
a pair, respectively.
- bug fix: ‘url-coding:encode’ outputs two hex digits for 0-15
Previously, octets 0 through 15 were output as "%0" through
"%f", respectively. Now, they are "%00" through "%0f".
- portability fix: big dishing loop handles #f ‘sockaddr:path’
For Unix domain sockets, some Guile versions have ‘sockaddr:path’
sometimes return the empty string, others ‘#f’.
- ‘(www url) url:parse’ can handle IPv6 addresses
Handling doesn't imply validation, however. For example:
(url:host (url:parse "http://fool@[::ffff:bogus.0.2.1]:42/foo";))
=> "[::ffff:bogus.0.2.1]"
- ‘(... answer) hqf<-upath’ more efficient
The char-set computation has been moved to load-time.
- ‘(... cookies) simple-parse-cookies’ takes optional arg SEP
By default, tokens are ‘#\,’ (comma)-separated. You can use SEP
to specify another character, e.g., ‘#\;’ (semicolon).
- new ‘(www cgi) cgi:init’ option: cookies-split-on-semicolon
If the server provides the CGI script with a "Netscape style"
(i.e., old and deprecated) set of cookies, you can use this
option to split them.
- ‘(www cgi) cgi:getenv’ recognizes some more "idiomatic" names
The following keys now are recognized by ‘cgi:getenv’ (that is,
they no longer signal "unrecognized key" error): ‘server-name’,
‘server-software’, ‘server-protocol’, ‘auth-type’, ‘http-accept’.
Also, the manual now marks those keys that either are aliases,
or return parts of the associated value, of these idiomatic names.
- new (... parse-request) proc: receive-request
This uses the same underlying machinery as ‘receive-response’
from (www http), and thus sports the same features.
Additionally, there is a new ‘request’ type with five accessor
procs: request-{method,upath,protocol-version,headers,body} and
the new predicate ‘request?’.
- new (... log) proc: string<-sockaddr
This formats AF_UNIX or AF_INET addresses (including port).
- new (... answer) proc: compose-response
This is a stripped down variant of ‘mouthpiece’. It uses the
same underlying machinery as ‘send-request’ from (www http) and
thus sports the same features.
- MARKED FOR REMOVAL
- 2012-12-31 module (www main)
- 2012-12-31 (www url) procs
- url:address
- url:unknown
- 2013-02-28 (... parse-request) procs
- read-first-line
- read-headers
- skip-headers
- read-body
- 2013-02-28 (www http) procs
- http:head
- http:get
- test suite expanded
Previously, there was just one test. Now, there are several,
and they are in directory v/ (for "validation", "verification",
"vouchsafed", and so on).
- doc license upgraded to GNU FDL 1.3
- maintenance uses Guile-BAUX 20120309.1509.1c4bb92
- 2.33 | 2012-02-29
- distribution now .tar.xz
If you have GNU tar, you can use "tar xf" and it will DTRT.
If not, you can use "xz -dc TARBALL | tar xf -" to unpack.
- configure no longer checks for some widely-available modules
The modules ‘(ice-9 and-let-star)’, ‘(ice-9 rdelim)’ and
‘(ice-9 regex)’ have been widely-available since Guile 1.4.x.
- configure uses SNUGGLE for cross-Guile portability
SNUGGLE is Free Software: <http://www.gnuvola.org/software/>.
It provides ‘build-aux/snuggle.m4’, which is more amicable than
the various ‘guile.m4’ in the wild.
- dropped ‘(www server-utils answer) string<-header-components’
This was pre-announced below in Guile-WWW 2.28 (2010-06-22).
- changes to (www http)
- bug fix: ‘http:request’ sends message body as-is
This procedure used to erroneously send ‘CRLF’ after each string
specified in BODY. Now, it sends BODY only.
- ‘http:status-ok?’ also accepts numeric arg
E.g., ‘(http:status-ok? 200)’ and ‘(http:status-ok? "200")’
both return ‘#t’.
- ‘http:request’ also accepts a symbolic method
Of course, a string is still acceptable. Additionally, it is
now an error if ‘method’ is neither string nor symbol.
- new procs: ‘send-request’, ‘receive-response’
These give (www http) a more asynchronous feel; it is now
possible to implement pipelining, connection re-use, etc.
Support for "chunked" transfer encoding and other HTTP 1.1 bits
is built-in, although you can explicitly downgrade to 1.0 if you
wish.
Other features: (optional) caller-directed i/o to reduce data
motion; support for ‘u8vector’ body (see example in the docs);
support for custom body type; caller-specifiable header-name
normalization; procedure names w/o "http:" prefix :-D.
- message field types now documented
The message object returned by ‘receive-response’ has a numeric
status-code and header names normalized by the caller.
In contrast, for backward compatability, the message object
returned by ‘http:request’ has a string status-code and
lower-case header names.
(Header names are symbolic in any case.)
- new fluid: protocol-version
This affects how ‘http:request’ calls ‘send-request’ internally.
It also impacts ‘http:get’, ‘http:head’, and ‘http:post-form’,
which call ‘http:request’.
The default value is ‘(1 . 0)’, i.e., HTTP 1.0. The idea is to
support backward compatability out of the box, but allow users
to experimentally do:
(set-fluid! protocol-version '(1 . 1))
without having to modify their current code. (New code
should use ‘send-request’ and ‘receive-response’ directly.)
This is a transitional feature of Guile-WWW 2.x; 3.x will
drop ‘http:request’ (et al) along with the need for this
fluid, entirely.
- (www cgi) recognizes ‘application/x-www-form-urlencoded’ better
Before, Content-Type recognition was over-constrained, failing
to handle parameters (usually of the form "; charset=...").
Things are now more relaxed.
- documentation now explicitly UTF-8
This has no immediate impact, but if you regenerate the .info,
it may be possible that the makeinfo you use will generate nicer
quotes, e.g., ‘foo’ instead of `foo'. Time will tell.
- maintenance: Autoconf 2.68, Automake 1.11.3, Guile-BAUX 20111227
diffstat:
devel/guile-www/Makefile | 5 +++--
devel/guile-www/PLIST | 4 +++-
devel/guile-www/distinfo | 8 ++++----
3 files changed, 10 insertions(+), 7 deletions(-)
diffs (45 lines):
diff -r 244da530fae1 -r f33f929dcaf6 devel/guile-www/Makefile
--- a/devel/guile-www/Makefile Wed Nov 07 00:28:37 2012 +0000
+++ b/devel/guile-www/Makefile Wed Nov 07 00:50:05 2012 +0000
@@ -1,8 +1,9 @@
-# $NetBSD: Makefile,v 1.30 2012/10/31 11:17:05 asau Exp $
+# $NetBSD: Makefile,v 1.31 2012/11/07 00:50:05 gdt Exp $
-DISTNAME= guile-www-2.32
+DISTNAME= guile-www-2.35
CATEGORIES= devel www
MASTER_SITES= http://download.savannah.nongnu.org/releases/guile-www/
+EXTRACT_SUFX= .tar.xz
MAINTAINER= gdt%NetBSD.org@localhost
HOMEPAGE= http://www.nongnu.org/guile-www/
diff -r 244da530fae1 -r f33f929dcaf6 devel/guile-www/PLIST
--- a/devel/guile-www/PLIST Wed Nov 07 00:28:37 2012 +0000
+++ b/devel/guile-www/PLIST Wed Nov 07 00:50:05 2012 +0000
@@ -1,10 +1,12 @@
-@comment $NetBSD: PLIST,v 1.11 2011/05/31 11:53:52 gdt Exp $
+@comment $NetBSD: PLIST,v 1.12 2012/11/07 00:50:05 gdt Exp $
info/guile-www.info
share/guile/site/www/cgi
+share/guile/site/www/crlf
share/guile/site/www/data/http-status
share/guile/site/www/data/mime-types
share/guile/site/www/http
share/guile/site/www/main
+share/guile/site/www/post
share/guile/site/www/server-utils/answer
share/guile/site/www/server-utils/big-dishing-loop
share/guile/site/www/server-utils/cgi-prep
diff -r 244da530fae1 -r f33f929dcaf6 devel/guile-www/distinfo
--- a/devel/guile-www/distinfo Wed Nov 07 00:28:37 2012 +0000
+++ b/devel/guile-www/distinfo Wed Nov 07 00:50:05 2012 +0000
@@ -1,5 +1,5 @@
-$NetBSD: distinfo,v 1.11 2011/09/12 21:36:45 wiz Exp $
+$NetBSD: distinfo,v 1.12 2012/11/07 00:50:05 gdt Exp $
-SHA1 (guile-www-2.32.tar.gz) = 61090b692c2f1988718ef6d36aff3e2c8fecc75b
-RMD160 (guile-www-2.32.tar.gz) = ed88db746cdc956b99057d9912c7423e4dd1b3c3
-Size (guile-www-2.32.tar.gz) = 552632 bytes
+SHA1 (guile-www-2.35.tar.xz) = 31619996edd2dfd86286650a9db5298f579ac740
+RMD160 (guile-www-2.35.tar.xz) = a75d79ae25a8dd23306a52b9bfa144a701820bd8
+Size (guile-www-2.35.tar.xz) = 614004 bytes
Home |
Main Index |
Thread Index |
Old Index