pkgsrc-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[pkgsrc/trunk]: pkgsrc/mk/flavor/pkg Removed the block comments, as they were...



details:   https://anonhg.NetBSD.org/pkgsrc/rev/5849dbaf0bb9
branches:  trunk
changeset: 536088:5849dbaf0bb9
user:      rillig <rillig%pkgsrc.org@localhost>
date:      Sun Dec 02 11:29:22 2007 +0000

description:
Removed the block comments, as they were full of redundant words.

diffstat:

 mk/flavor/pkg/replace.mk |  90 +++++++++++++++--------------------------------
 1 files changed, 29 insertions(+), 61 deletions(-)

diffs (156 lines):

diff -r dfce5fdfef77 -r 5849dbaf0bb9 mk/flavor/pkg/replace.mk
--- a/mk/flavor/pkg/replace.mk  Sun Dec 02 11:25:02 2007 +0000
+++ b/mk/flavor/pkg/replace.mk  Sun Dec 02 11:29:22 2007 +0000
@@ -1,4 +1,4 @@
-# $NetBSD: replace.mk,v 1.22 2007/11/17 14:00:55 rillig Exp $
+# $NetBSD: replace.mk,v 1.23 2007/12/02 11:29:22 rillig Exp $
 #
 
 # _flavor-replace:
@@ -57,22 +57,14 @@
        || ${FAIL_MSG} "[${.TARGET}] ${_REPLACE_NEWNAME_FILE}: File not found"; \
        newname=`${CAT} ${_REPLACE_NEWNAME_FILE}`
 
-######################################################################
-### undo-replace-check (PRIVATE)
-######################################################################
-### undo-replace-check verifies that there was a previous "replace"
-### action performed that can be undone.
-###
+# Verifies that there was a previous "replace" action performed that can be undone.
+#
 undo-replace-check: .PHONY
        ${RUN} [ -f ${_COOKIE.replace} ] \
        || ${FAIL_MSG} "No replacement to undo!"
 
-######################################################################
-### replace-tarup (PRIVATE)
-######################################################################
-### replace-tarup generates a binary package for the (older) installed
-### package using pkg_tarup.
-###
+# Generates a binary package for the (older) installed package using pkg_tarup.
+#
 replace-tarup: .PHONY
        ${RUN} [ -x ${_PKG_TARUP_CMD:Q} ] \
        || ${FAIL_MSG} ${_PKG_TARUP_CMD:Q}" was not found.";            \
@@ -81,26 +73,18 @@
                PKGREPOSITORY=${WRKDIR}                                 \
                ${_PKG_TARUP_CMD} $${oldname}
 
-######################################################################
-### undo-replace-install (PRIVATE)
-######################################################################
-### undo-replace-install re-installs the old package from the binary
-### package saved from replace-tarup.
-###
+# Re-installs the old package that has been saved by replace-tarup.
+#
 undo-replace-install: .PHONY
        @${PHASE_MSG} "Re-adding ${PKGNAME} from saved tar-up package."
        ${RUN} ${_REPLACE_OLDNAME_CMD};                                 \
        ${ECHO} "Installing saved package ${WRKDIR}/$${oldname}${PKG_SUFX}"; \
        ${PKG_ADD} ${WRKDIR}/$${oldname}${PKG_SUFX}
 
-######################################################################
-### replace-names (PRIVATE)
-######################################################################
-
-### replace-names computes and saves the full names of the installed
-### package to be replaced (oldname) and the package that will be
-### installed (newname) into files for later use.
-###
+# Computes and saves the full names of the installed package to be replaced
+# (oldname) and the package that will be installed (newname), so that these
+# names are available later.
+#
 replace-names: .PHONY
        ${RUN} if [ x"${OLDNAME}" = x ]; then                           \
                wildcard=${PKGWILDCARD:Q};                              \
@@ -111,12 +95,8 @@
        ${RUN} ${ECHO} ${PKGNAME} > ${_REPLACE_NEWNAME_FILE}
        ${RUN} ${CP} -f ${_REPLACE_NEWNAME_FILE} ${_COOKIE.replace}
 
-######################################################################
-### replace-preserve-installed-info (PRIVATE)
-######################################################################
-### replace-preserve-installed-info saves and removes the +INSTALLED_INFO
-### file from the installed package.
-###
+# Saves and removes the +INSTALLED_INFO file from the installed package.
+#
 replace-preserve-installed-info: .PHONY
        @${STEP_MSG} "Preserving existing +INSTALLED_INFO file."
        ${RUN} ${_REPLACE_OLDNAME_CMD};                                 \
@@ -124,12 +104,8 @@
        ${TEST} ! -f "$$installed_info" ||                              \
        ${MV} $$installed_info ${_INSTALLED_INFO_FILE}
 
-######################################################################
-### replace-preserve-required-by (PRIVATE)
-######################################################################
-### replace-preserve-required-by saves and removes the +REQUIRED_BY
-### file from the installed package.
-###
+# Saves and removes the +REQUIRED_BY file from the installed package.
+#
 replace-preserve-required-by: .PHONY
        @${STEP_MSG} "Preserving existing +REQUIRED_BY file."
        ${RUN} ${_REPLACE_OLDNAME_CMD};                                 \
@@ -137,16 +113,14 @@
        ${TEST} ! -f "$$required_by" ||                                 \
        ${MV} $$required_by ${_REQUIRED_BY_FILE}
 
-######################################################################
-### replace-fixup-required-by (PRIVATE)
-######################################################################
-### replace-fixup-required-by fixes the +CONTENTS files of dependent
-### packages to refer to the replacement package, and puts the
-### +REQUIRED_BY file back into place.  It also sets the
-### unsafe_depends_strict tag on each dependent package, and sets the
-### unsafe_depends tag if the replaced package has a different
-### version.
-### XXX Only set unsafe_depends if there is an ABI change.
+# Fixes the +CONTENTS files of dependent packages to refer to the
+# replacement package, and puts the +REQUIRED_BY file back into place.
+# It also sets the unsafe_depends_strict tag on each dependent package,
+# and sets the unsafe_depends tag if the replaced package has a different
+# version.
+#
+# XXX Only set unsafe_depends if there is an ABI change.
+#
 replace-fixup-required-by: .PHONY
        @${STEP_MSG} "Fixing @pkgdep entries in dependent packages."
        ${RUN} ${_REPLACE_OLDNAME_CMD};                                 \
@@ -174,12 +148,10 @@
        done;                                                           \
        ${MV} ${_REQUIRED_BY_FILE} ${_PKG_DBDIR}/$$newname/+REQUIRED_BY
 
-######################################################################
-### replace-fixup-installed-info (PRIVATE)
-######################################################################
-### replace-fixup-installed-info removes unsafe_depends* and rebuild
-### tags from this package.
-### XXX pkg_admin should not complain on unset with no +INSTALLED_INFO.
+# Removes unsafe_depends* and rebuild tags from this package.
+#
+# XXX: pkg_admin should not complain on unset with no +INSTALLED_INFO.
+#
 replace-fixup-installed-info: .PHONY
        @${STEP_MSG} "Removing unsafe_depends and rebuild tags."
        ${RUN} ${_REPLACE_NEWNAME_CMD};                                 \
@@ -190,12 +162,8 @@
                ${PKG_ADMIN} unset $$var $$newname;                     \
        done
 
-######################################################################
-### replace-clean (PRIVATE)
-######################################################################
-### replace-clean removes the state files for the "replace" target so
-### that it may be re-invoked.
-###
+# Removes the state files for the "replace" target, so that it may be re-invoked.
+#
 replace-clean: .PHONY
        ${RUN} ${_REPLACE_OLDNAME_CMD};                                 \
        ${_REPLACE_NEWNAME_CMD};                                        \



Home | Main Index | Thread Index | Old Index