pkgsrc-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[pkgsrc/trunk]: pkgsrc/mail/exim Update mail/exim from 4.63 to 4.66
details: https://anonhg.NetBSD.org/pkgsrc/rev/88a39882c792
branches: trunk
changeset: 523599:88a39882c792
user: abs <abs%pkgsrc.org@localhost>
date: Wed Jan 10 12:54:36 2007 +0000
description:
Update mail/exim from 4.63 to 4.66
Exim version 4.66
-----------------
PH/01 Two more bugs that were introduced by 4.64/PH/07, in addition to the one
fixed by 4.65/MH/01 (is this a record?) are fixed:
(i) An empty string was always treated as zero by the numeric comparison
operators. This behaviour has been restored.
(ii) It is documented that the numeric comparison operators always treat
their arguments as decimal numbers. This was broken in that numbers
starting with 0 were being interpreted as octal.
While fixing these problems I realized that there was another issue that
hadn't been noticed. Values of message_size_limit (both the global option
and the transport option) were treated as octal if they started with 0.
The documentation was vague. These values are now always treated as
decimal, and I will make that clear in the documentation.
Exim version 4.65
-----------------
TK/01 Disable default definition of HAVE_LINUX_SENDFILE. Clashes with
Linux large file support (_FILE_OFFSET_BITS=64) on older glibc
versions. (#438)
MH/01 Don't check that the operands of numeric comparison operators are
integers when their expansion is in "skipping" mode (fixes bug
introduced by 4.64-PH/07).
PH/01 If a system filter or a router generates more than SHRT_MAX (32767)
child addresses, Exim now panics and dies. Previously, because the count
is held in a short int, deliveries were likely to be lost. As such a
large number of recipients for a single message is ridiculous
(performance will be very, very poor), I have chosen to impose a limit
rather than extend the field.
Exim version 4.64
-----------------
TK/01 Bugzilla #401. Fix DK spooling code so that it can overwrite a
leftover -K file (the existence of which was triggered by #402).
While we were at it, introduced process PID as part of the -K
filename. This should rule out race conditions when creating
these files.
TK/02 Bugzilla #402. Apply patch from Simon Arlott, speeding up DK signing
processing considerably. Previous code took too long for large mails,
triggering a timeout which in turn triggers #401.
TK/03 Introduced HAVE_LINUX_SENDFILE to os.h-Linux. Currently only used
in the DK code in transports.c. sendfile() is not really portable,
hence the _LINUX specificness.
TF/01 In the add_headers option to the mail command in an Exim filter,
there was a bug that Exim would claim a syntax error in any
header after the first one which had an odd number of characters
in the field name.
PH/01 If a server that rejects MAIL FROM:<> was the target of a sender
callout verification, Exim cached a "reject" for the entire domain. This
is correct for most verifications, but it is not correct for a recipient
verification with use_sender or use_postmaster set, because in that case
the callout does not use MAIL FROM:<>. Exim now distinguishes the special
case of MAIL FROM:<> rejection from other early rejections (e.g.
rejection of HELO). When verifying a recipient using a non-null MAIL
address, the cache is ignored if it shows MAIL FROM:<> rejection.
Whatever the result of the callout, the value of the domain cache is
left unchanged (for any other kind of callout, getting as far as trying
RCPT means that the domain itself is ok).
PH/02 Tidied a number of unused variable and signed/unsigned warnings that
gcc 4.1.1 threw up.
PH/03 On Solaris, an unexpectedly close socket (dropped connection) can
manifest itself as EPIPE rather than ECONNECT. When tidying away a
session, the daemon ignores ECONNECT errors and logs others; it now
ignores EPIPE as well.
PH/04 Applied Nico Erfurth's refactoring patch to tidy up mime.c
(quoted-printable decoding).
PH/05 Applied Nico Erfurth's refactoring patch to tidy up spool_mbox.c, and
later the small subsequent patch to fix an introduced bug.
PH/06 Installed the latest Cygwin Makefile from the Cygwin maintainer.
PH/07 There was no check for overflow in expansions such as ${if >{1}{4096M}}.
PH/08 An error is now given if message_size_limit is specified negative.
PH/09 Applied and tidied up Jakob Hirsch's patch for allowing ACL variables
to be given (somewhat) arbitrary names.
JJ/01 exipick 20060919.0, allow for arbitrary acl_ variables introduced
in 4.64-PH/09.
JJ/02 exipick 20060919.0, --show-vars args can now be regular expressions,
miscellaneous code fixes
PH/10 Added the log_reject_target ACL modifier to specify where to log
rejections.
PH/11 Callouts were setting the name used for EHLO/HELO from $smtp_active_
hostname. This is wrong, because it relates to the incoming message (and
probably the interface on which it is arriving) and not to the outgoing
callout (which could be using a different interface). This has been
changed to use the value of the helo_data option from the smtp transport
instead - this is what is used when a message is actually being sent. If
there is no remote transport (possible with a router that sets up host
addresses), $smtp_active_hostname is used.
PH/12 Installed Andrey Panin's patch to add a dovecot authenticator. Various
tweaks were necessary in order to get it to work (see also 21 below):
(a) The code assumed that strncpy() returns a negative number on buffer
overflow, which isn't the case. Replaced with Exim's string_format()
function.
(b) There were several signed/unsigned issues. I just did the minimum
hacking in of casts. There is scope for a larger refactoring.
(c) The code used strcasecmp() which is not a standard C function.
Replaced with Exim's strcmpic() function.
(d) The code set only $1; it now sets $auth1 as well.
(e) A simple test gave the error "authentication client didn't specify
service in request". It would seem that Dovecot has changed its
interface. Fortunately there's a specification; I followed it and
changed what the client sends and it appears to be working now.
PH/13 Added $message_headers_raw to provide the headers without RFC 2047
decoding.
PH/14 Corrected misleading output from -bv when -v was also used. Suppose the
address A is aliased to B and C, where B exists and C does not. Without
-v the output is "A verified" because verification stops after a
successful redirection if more than one address is generated. However,
with -v the child addresses are also verified. Exim was outputting "A
failed to verify" and then showing the successful verification for C,
with its parentage. It now outputs "B failed to verify", showing B's
parentage before showing the successful verification of C.
PH/15 Applied Michael Deutschmann's patch to allow DNS black list processing to
look up a TXT record in a specific list after matching in a combined
list.
PH/16 It seems that the options setting for the resolver (RES_DEFNAMES and
RES_DNSRCH) can affect the behaviour of gethostbyname() and friends when
they consult the DNS. I had assumed they would set it the way they
wanted; and indeed my experiments on Linux seem to show that in some
cases they do (I could influence IPv6 lookups but not IPv4 lookups).
To be on the safe side, however, I have now made the interface to
host_find_byname() similar to host_find_bydns(), with an argument
containing the DNS resolver options. The host_find_byname() function now
sets these options at its start, just as host_find_bydns() does. The smtp
transport options dns_qualify_single and dns_search_parents are passed to
host_find_byname() when gethostbyname=TRUE in this transport. Other uses
of host_find_byname() use the default settings of RES_DEFNAMES
(qualify_single) but not RES_DNSRCH (search_parents).
PH/17 Applied (a modified version of) Nico Erfurth's patch to make
spool_read_header() do less string testing, by means of a preliminary
switch on the second character of optional "-foo" lines. (This is
overdue, caused by the large number of possibilities that now exist.
Originally there were few.) While I was there, I also converted the
str(n)cmp tests so they don't re-test the leading "-" and the first
character, in the hope this might squeeze out yet more improvement.
PH/18 Two problems with "group" syntax in header lines when verifying: (1) The
flag allowing group syntax was set by the header_syntax check but not
turned off, possible causing trouble later; (2) The flag was not being
set at all for the header_verify test, causing "group"-style headers to
be rejected. I have now set it in this case, and also caused header_
verify to ignore an empty address taken from a group. While doing this, I
came across some other cases where the code for allowing group syntax
while scanning a header line wasn't quite right (mostly, not resetting
the flag correctly in the right place). These bugs could have caused
trouble for malformed header lines. I hope it is now all correct.
PH/19 The functions {pwcheck,saslauthd}_verify_password() are always called
with the "reply" argument non-NULL. The code, however (which originally
came from elsewhere) had *some* tests for NULL when it wrote to *reply,
but it didn't always do it. This confused somebody who was copying the
code for some other use. I have removed all the tests.
PH/20 It was discovered that the GnuTLS code had support for RSA_EXPORT, a
feature that was used to support insecure browsers during the U.S. crypto
embargo. It requires special client support, and Exim is probably the
only MTA that supported it -- and would never use it because real RSA is
always available. This code has been removed, because it had the bad
effect of slowing Exim down by computing (never used) parameters for the
RSA_EXPORT functionality.
PH/21 On the advice of Timo Sirainen, added a check to the dovecot
authenticator to fail if there's a tab character in the incoming data
(there should never be unless someone is messing about, as it's supposed
to be base64-encoded). Also added, on Timo's advice, the "secured" option
if the connection is using TLS or if the remote IP is the same as the
local IP, and the "valid-client-cert option" if a client certificate has
been verified.
PH/22 As suggested by Dennis Davis, added a server_condition option to *all*
authenticators. This can be used for authorization after authentication
succeeds. (In the case of plaintext, it servers for both authentication
and authorization.)
PH/23 Testing for tls_required and lost_connection in a retry rule didn't work
if any retry times were supplied.
PH/24 Exim crashed if verify=helo was activated during an incoming -bs
connection, where there is no client IP address to check. In this
situation, the verify now always succeeds.
PH/25 Applied John Jetmore's -Mset patch.
PH/26 Added -bem to be like -Mset, but loading a message from a file.
PH/27 In a string expansion for a processed (not raw) header when multiple
headers of the same name were present, leading whitespace was being
removed from all of them, but trailing whitespace was being removed only
from the last one. Now trailing whitespace is removed from each header
before concatenation. Completely empty headers in a concatenation (as
before) are ignored.
PH/28 Fixed bug in backwards-compatibility feature of PH/09 (thanks to John
Jetmore). It would have mis-read ACL variables from pre-4.61 spool files.
PH/29 [Removed. This was a change that I later backed out, and forgot to
correct the ChangeLog entry (that I had efficiently created) before
committing the later change.]
PH/30 Exim was sometimes attempting to deliver messages that had suffered
address errors (4xx response to RCPT) over the same connection as other
messages routed to the same hosts. Such deliveries are always "forced",
so retry times are not inspected. This resulted in far too many retries
for the affected addresses. The effect occurred only when there were more
hosts than the hosts_max_try setting in the smtp transport when it had
the 4xx errors. Those hosts that it had tried were not added to the list
of hosts for which the message was waiting, so if all were tried, there
was no problem. Two fixes have been applied:
(i) If there are any address or message errors in an SMTP delivery, none
of the hosts (tried or untried) are now added to the list of hosts
for which the message is waiting, so the message should not be a
candidate for sending over the same connection that was used for a
successful delivery of some other message. This seems entirely
reasonable: after all the message is NOT "waiting for some host".
This is so "obvious" that I'm not sure why it wasn't done
previously. Hope I haven't missed anything, but it can't do any
harm, as the worst effect is to miss an optimization.
(ii) If, despite (i), such a delivery is accidentally attempted, the
routing retry time is respected, so at least it doesn't keep
hammering the server.
PH/31 Installed Andrew Findlay's patch to close the writing end of the socket
in ${readsocket because some servers need this prod.
PH/32 Added some extra debug output when updating a wait-xxx database.
PH/33 The hint "could be header name not terminated by colon", which has been
given for certain expansion errors for a long time, was not being given
for the ${if def:h_colon_omitted{... case.
PH/34 The spec says: "With one important exception, whenever a domain list is
being scanned, $domain contains the subject domain." There was at least
one case where this was not true.
PH/35 The error "getsockname() failed: connection reset by peer" was being
written to the panic log as well as the main log, but it isn't really
panic-worthy as it just means the connection died rather early on. I have
removed the panic log writing for the ECONNRESET error when getsockname()
fails.
PH/36 After a 4xx response to a RCPT error, that address was delayed (in queue
runs only) independently of the message's sender address. This meant
that, if the 4xx error was in fact related to the sender, a different
message to the same recipient with a different sender could confuse
things. In particualar, this can happen when sending to a greylisting
server, but other circumstances could also provoke similar problems.
I have changed the default so that the retry time for these errors is now
based a combination of the sender and recipient addresses. This change
can be overridden by setting address_retry_include_sender=false in the
smtp transport.
PH/37 For LMTP over TCP/IP (the smtp transport), error responses from the
remote server are returned as part of bounce messages. This was not
happening for LMTP over a pipe (the lmtp transport), but now it is the
same for both kinds of LMTP.
PH/38 Despite being documented as not happening, Exim was rewriting addresses
in header lines that were in fact CNAMEs. This is no longer the case.
PH/39 If -R or -S was given with -q<time>, the effect of -R or -S was ignored,
and queue runs started by the daemon processed all messages. This has
been fixed so that -R and -S can now usefully be given with -q<time>.
PH/40 Import PCRE release 6.7 (fixes some bugs).
PH/41 Add bitwise logical operations to eval (courtesy Brad Jorsch).
PH/42 Give an error if -q is specified more than once.
PH/43 Renamed the variables $interface_address and $interface_port as
$received_ip_address and $received_port, to make it clear that these
values apply to message reception, and not to the outgoing interface when
a message is delivered. (The old names remain recognized, of course.)
PH/44 There was no timeout on the connect() call when using a Unix domain
socket in the ${readsocket expansion. There now is.
PH/45 Applied a modified version of Brad Jorsch's patch to allow "message" to
be meaningful with "accept".
SC/01 Eximstats V1.43
Bug fix for V1.42 with -h0 specified. Spotted by Chris Lear.
SC/02 Eximstats V1.44
Use a glob alias rather than an array ref in the generated
parser. This improves both readability and performance.
SC/03 Eximstats V1.45 (Marco Gaiarin / Steve Campbell)
Collect SpamAssassin and rejection statistics.
Don't display local sender or destination tables unless
there is data to show.
Added average volumes into the top table text output.
SC/04 Eximstats V1.46
Collect data on the number of addresses (recipients)
as well as the number of messages.
SC/05 Eximstats V1.47
Added 'Message too big' to the list of mail rejection
reasons (thanks to Marco Gaiarin).
SC/06 Eximstats V1.48
Mainlog lines which have GMT offsets and are too short to
have a flag are now skipped.
SC/07 Eximstats V1.49 (Alain Williams)
Added the -emptyok flag.
SC/08 Eximstats V1.50
Fixes for obtaining the IP address from reject messages.
JJ/03 exipick.20061117.2, made header handling as similar to exim as possible
(added [br]h_ prefixes, implemented RFC2047 decoding. Fixed
whitesspace changes from 4.64-PH/27
JJ/04 exipick.20061117.2, fixed format and added $message_headers_raw to
match 4.64-PH/13
JJ/05 exipick.20061117.2, bug fixes (error out sooner when invalid criteria
are found, allow negative numbers in numeric criteria)
JJ/06 exipick.20061117.2, added new $message_body_missing variable
JJ/07 exipick.20061117.2, added $received_ip_address and $received_port
to match changes made in 4.64-PH/43
PH/46 Applied Jori Hamalainen's patch to add features to exiqsumm.
PH/47 Put in an explicit test for a DNS lookup of an address record where the
"domain" is actually an IP address, and force a failure. This locks out
those revolvers/nameservers that support "A-for-A" lookups, in
contravention of the specifications.
PH/48 When a host name was looked up from an IP address, and the subsequent
forward lookup of the name timed out, the host name was left in
$sender_host_name, contrary to the specification.
PH/49 Although default lookup types such as lsearch* or cdb*@ have always been
restricted to single-key lookups, Exim was not diagnosing an error if
* or *@ was used with a query-style lookup.
PH/50 Increased the value of DH_BITS in tls-gnu.c from 768 to 1024.
MH/01 local_scan ABI version incremented to 1.1. It should have been updated
long ago, but noone interested enough thought of it. Let's just say that
the "1.1" means that there are some new functions that weren't there at
some point in the past.
PH/51 Error processing for expansion failure of helo_data from an smtp
transport during callout processing was broken.
PH/52 Applied John Jetmore's patch to allow tls-on-connect and STARTTLS to be
tested/used via the -bh/-bhc/-bs options.
PH/53 Added missing "#include <time.h>" to pcre/pcretest.c (this was a PCRE
bug, fixed in subsequent PCRE releases).
PH/54 Applied Robert Bannocks' patch to avoid a problem with references that
arises when using the Solaris LDAP libraries (but not with OpenLDAP).
PH/55 Check for a ridiculously long file name in exim_dbmbuild.
diffstat:
mail/exim/Makefile | 5 ++---
mail/exim/distinfo | 10 +++++-----
mail/exim/patches/patch-aa | 15 ++++++++-------
3 files changed, 15 insertions(+), 15 deletions(-)
diffs (95 lines):
diff -r 3d3b8c5ad5f6 -r 88a39882c792 mail/exim/Makefile
--- a/mail/exim/Makefile Wed Jan 10 12:50:04 2007 +0000
+++ b/mail/exim/Makefile Wed Jan 10 12:54:36 2007 +0000
@@ -1,7 +1,6 @@
-# $NetBSD: Makefile,v 1.80 2006/11/20 11:56:42 abs Exp $
+# $NetBSD: Makefile,v 1.81 2007/01/10 12:54:36 abs Exp $
-DISTNAME= exim-4.63
-PKGREVISION= 1
+DISTNAME= exim-4.66
CATEGORIES= mail net
MASTER_SITES= ftp://ftp.exim.org/pub/exim/exim4/ \
ftp://ftp.csx.cam.ac.uk/pub/software/email/exim/exim4/ \
diff -r 3d3b8c5ad5f6 -r 88a39882c792 mail/exim/distinfo
--- a/mail/exim/distinfo Wed Jan 10 12:50:04 2007 +0000
+++ b/mail/exim/distinfo Wed Jan 10 12:54:36 2007 +0000
@@ -1,9 +1,9 @@
-$NetBSD: distinfo,v 1.35 2006/11/20 11:56:42 abs Exp $
+$NetBSD: distinfo,v 1.36 2007/01/10 12:54:36 abs Exp $
-SHA1 (exim-4.63.tar.bz2) = 44bb57c26bee29500d0b80ba57997e5325f144d0
-RMD160 (exim-4.63.tar.bz2) = 43ff82bad9e097da670d6b5c77e672b3edc3945b
-Size (exim-4.63.tar.bz2) = 1586169 bytes
-SHA1 (patch-aa) = 11de4fdeea6a99f8347dbfff5c7d76fb3ed904d1
+SHA1 (exim-4.66.tar.bz2) = 4a2ac2cd51865b57610e2b153e20c305b7f9f504
+RMD160 (exim-4.66.tar.bz2) = 4481c9ca4932be9ab5f4f0a66b99f3e2f8e6c5fa
+Size (exim-4.66.tar.bz2) = 1584704 bytes
+SHA1 (patch-aa) = d6c067e75f16275b4d8c4e46c8ded0627cb11ae4
SHA1 (patch-ab) = 1c6e7882346974390c22e7b9e09a76c5ed670d1d
SHA1 (patch-ac) = a3ecdafc44ad2212b00e49de594efb26612b0b75
SHA1 (patch-ad) = 52c768378483bf02295d46c01d55f955697834eb
diff -r 3d3b8c5ad5f6 -r 88a39882c792 mail/exim/patches/patch-aa
--- a/mail/exim/patches/patch-aa Wed Jan 10 12:50:04 2007 +0000
+++ b/mail/exim/patches/patch-aa Wed Jan 10 12:54:36 2007 +0000
@@ -1,6 +1,6 @@
-$NetBSD: patch-aa,v 1.17 2006/11/20 11:56:42 abs Exp $
+$NetBSD: patch-aa,v 1.18 2007/01/10 12:54:36 abs Exp $
---- Local/Makefile.pkgsrc.orig 2006-11-15 11:58:34.000000000 +0000
+--- Local/Makefile.pkgsrc.orig 2007-01-10 12:40:16.000000000 +0000
+++ Local/Makefile.pkgsrc
@@ -100,7 +100,7 @@
# /usr/local/sbin. The installation script will try to create this directory,
@@ -56,13 +56,14 @@
#------------------------------------------------------------------------------
-@@ -473,10 +473,10 @@ FIXED_NEVER_USERS=root
+@@ -473,11 +473,11 @@ FIXED_NEVER_USERS=root
# included in the Exim binary. You will then need to set up the run time
# configuration to make use of the mechanism(s) selected.
-# AUTH_CRAM_MD5=yes
+AUTH_CRAM_MD5=yes
# AUTH_CYRUS_SASL=yes
+ # AUTH_DOVECOT=yes
-# AUTH_PLAINTEXT=yes
-# AUTH_SPA=yes
+AUTH_PLAINTEXT=yes
@@ -70,7 +71,7 @@
#------------------------------------------------------------------------------
-@@ -629,7 +629,7 @@ HEADERS_CHARSET="ISO-8859-1"
+@@ -643,7 +643,7 @@ HEADERS_CHARSET="ISO-8859-1"
# %s. This will be replaced by one of the strings "main", "panic", or "reject"
# to form the final file names. Some installations may want something like this:
@@ -79,7 +80,7 @@
# which results in files with names /var/log/exim_mainlog, etc. The directory
# in which the log files are placed must exist; Exim does not try to create
-@@ -870,11 +870,11 @@ SYSTEM_ALIASES_FILE=/etc/aliases
+@@ -884,11 +884,11 @@ SYSTEM_ALIASES_FILE=/etc/aliases
# haven't got Perl, Exim will still build and run; you just won't be able to
# use those utilities.
@@ -96,7 +97,7 @@
#------------------------------------------------------------------------------
-@@ -1068,7 +1068,7 @@ TMPDIR="/tmp"
+@@ -1082,7 +1082,7 @@ TMPDIR="/tmp"
# (process id) to a file so that it can easily be identified. The path of the
# file can be specified here. Some installations may want something like this:
@@ -105,7 +106,7 @@
# If PID_FILE_PATH is not defined, Exim writes a file in its spool directory
# using the name "exim-daemon.pid".
-@@ -1104,3 +1104,10 @@ TMPDIR="/tmp"
+@@ -1118,3 +1118,10 @@ TMPDIR="/tmp"
# SUPPORT_MOVE_FROZEN_MESSAGES=yes
# End of EDITME for Exim 4.
Home |
Main Index |
Thread Index |
Old Index