[pkgsrc/trunk]: pkgsrc/ham/hamlib nham/hamlib: Update to 4.5

[gdt <gdt%pkgsrc.org@localhost>]

details:   https://anonhg.NetBSD.org/pkgsrc/rev/7135fe1c13bd
branches:  trunk
changeset: 387559:7135fe1c13bd
user:      gdt <gdt%pkgsrc.org@localhost>
date:      Tue Nov 01 17:17:37 2022 +0000

description:
nham/hamlib: Update to 4.5

Upstream NEWS does not indicate an ABI break, and there is no shlib
major change.

Upstream NEWS, less most new radios, bugfixes, and minor improvements:

Version 4.5 (2022-10-30)


        * New rotator utility https://www.pianetaradio.it/blog/catrotator/
        * Kenwood rigs should now support AI command packets
        * Add get_separator and set_separator and -S option for rigctld -- node-red applicability
        * Add GRBLTRK rotor project -- two axis rotor
        * enum meter_level_e is deprecated and will be removed in 4.6
        * Add SDRPlay SDRUno rig -- can now use Data/Pkt in WSJTX
        * Add ability to use cat_string to FLRig via the "w" and "W" commands
        * Add -B/--mapa2b to rigctlcom
          Allows rigctlcom to map set_freq on VFOA to VFOB instead
          This will allow CW Skimmer to work with some rigs (e.g. IC7300) using FM
          mode on VFOA and CW mode on VFOB and split mode transmit on VFOB.
          Clicking on CW Skimmer will change VFOB instead of VFOA to allow working
          dxpeditions where the fox is staying on frequency
        * Add password capability to rigctld via -A switch.
          rigctld -A will produce a consistent shared key for any specific password that can used in \password and rig_set_password
          TBD The shared key can also be placed in .hamlib_settings
        * Asynchronous rig data output handling to support transceive and spectrum data. Mikael, OH3BHX
          Example for the IC-7300 to multicast on port 20001 and provide async rig information
          rigctld --port=20001 --model=3073 --serial-speed=115200 --rig-file=/dev/serial/... --set-conf=rts_state=OFF --set-conf=dtr_state=OFF --multicast-addr=224.0.0.1 --multicast-port=20001 
--set-conf=async=1
          Also, spectrum data output needs to be enabled with: \set_func SPECTRUM 1
        * See new set_conf option async for some Icom rigs
        * Multicast UDP packet output for asynchronous data. Mikael, OH3BHX
        * Rig state poll routine to serve commonly used data like frequency and mode from cache. Mikael, OH3BHX
        * deprecated hamlib_port_t at front of rig_state structure -- new one at end of structure
        * New rig_send_raw to send/read raw command to rig
        * New RIG_LEVEL_BAND_SELECT for Yaesu rigs
        * New rig_get_conf2 to replace rig_get_conf buffer overflow potential
        * New rot_get_conf2 to reaplce rot_get_conf buffer overflow potential
        * Added Barrett 4050 -- not functional yet
        * Deprecated: rigctl commands \set_trn (A) and \get_trn (a) as they never worked as intended
        * Deprecated: field rig_caps.transceive and RIG_TRN_* macros

Version 4.4 (2021-12-02)
        * Icom rigs now default filter 2 when setting PKTUSB but user can override
        * Add Android sensor as a rotator
        * Added rig_get_vfo to some Icom rigs that have XCHG or 0x25 command capability
        * Added ability to build hamlib with docker
        * Faster serial i/o noticeable on higher baud rates

diffstat:

 ham/hamlib/Makefile |  9 ++-------
 ham/hamlib/PLIST    |  5 +++--
 ham/hamlib/distinfo |  8 ++++----
 3 files changed, 9 insertions(+), 13 deletions(-)

diffs (66 lines):

diff -r e8ca6704957d -r 7135fe1c13bd ham/hamlib/Makefile
--- a/ham/hamlib/Makefile       Tue Nov 01 10:20:55 2022 +0000
+++ b/ham/hamlib/Makefile       Tue Nov 01 17:17:37 2022 +0000
@@ -1,9 +1,9 @@
-# $NetBSD: Makefile,v 1.54 2022/06/28 11:34:08 wiz Exp $
+# $NetBSD: Makefile,v 1.55 2022/11/01 17:17:37 gdt Exp $
 #
 
 DISTNAME=      hamlib-${VERSION}
 # V.rcN, VrcN, V~rcN
-VERSION=       4.3.1
+VERSION=       4.5
 VERSIOND=      ${VERSION}
 VERSIONF=      ${VERSION}
 PKGREVISION=   1
@@ -29,11 +29,6 @@
 
 CHECK_PORTABILITY_SKIP+=       scripts/build-w64-jtsdk.sh
 
-# Reported to upstream mailinglist 20210915
-post-install:
-       mv ${DESTDIR}/${PREFIX}/bin/testlibusb ${DESTDIR}/${PREFIX}/bin/rigctl_testlibusb
-
-
 TEST_TARGET=   check
 
 .include "../../mk/bsd.prefs.mk"
diff -r e8ca6704957d -r 7135fe1c13bd ham/hamlib/PLIST
--- a/ham/hamlib/PLIST  Tue Nov 01 10:20:55 2022 +0000
+++ b/ham/hamlib/PLIST  Tue Nov 01 17:17:37 2022 +0000
@@ -1,18 +1,19 @@
-@comment $NetBSD: PLIST,v 1.20 2021/09/15 22:52:45 gdt Exp $
+@comment $NetBSD: PLIST,v 1.21 2022/11/01 17:17:37 gdt Exp $
 bin/ampctl
 bin/ampctld
 bin/rigctl
-bin/rigctl_testlibusb
 bin/rigctlcom
 bin/rigctld
 bin/rigmem
 bin/rigsmtr
 bin/rigswr
+bin/rigtestlibusb
 bin/rotctl
 bin/rotctld
 include/hamlib/ampclass.h
 include/hamlib/amplifier.h
 include/hamlib/amplist.h
+include/hamlib/config.h
 include/hamlib/rig.h
 include/hamlib/rig_dll.h
 include/hamlib/rigclass.h
diff -r e8ca6704957d -r 7135fe1c13bd ham/hamlib/distinfo
--- a/ham/hamlib/distinfo       Tue Nov 01 10:20:55 2022 +0000
+++ b/ham/hamlib/distinfo       Tue Nov 01 17:17:37 2022 +0000
@@ -1,6 +1,6 @@
-$NetBSD: distinfo,v 1.27 2021/10/26 10:48:39 nia Exp $
+$NetBSD: distinfo,v 1.28 2022/11/01 17:17:37 gdt Exp $
 
-BLAKE2s (hamlib-4.3.1.tar.gz) = fa47241b921ffb49b1c31a8cd116da505eed0d1fc1b806f4c95411b5c9835d98
-SHA512 (hamlib-4.3.1.tar.gz) = 8dee4676a19de7ac1ef733a4285b76e918f11aad6594d0557d36df295faf04c615e0993edb2f9ed5e7aea718c184603fec831caf28b75026c705f0b2e4b9eca7
-Size (hamlib-4.3.1.tar.gz) = 2356944 bytes
+BLAKE2s (hamlib-4.5.tar.gz) = 40c1536b6a88df3fd8edad61b07dd12bce3b4a302a68f29be5316b88c74ecf13
+SHA512 (hamlib-4.5.tar.gz) = 671da06aed54951ca810b4de7291a16de3a2f6ed54b8d024d4d9bfed9dfc6a21336c3cadd6f5b128c3ab54f1edd2b22db491b074b7759b9dfd9e71e1ce4055f3
+Size (hamlib-4.5.tar.gz) = 2568061 bytes
 SHA1 (patch-src_network.c) = ca55437ace4576abfbeb5693b400d5a85179e17d