CVS commit: pkgsrc/net/p5-SNMP-Info

["Wen Heping" <wen%netbsd.org@localhost>]

Module Name:    pkgsrc
Committed By:   wen
Date:           Sat May 30 02:49:57 UTC 2015

Modified Files:
        pkgsrc/net/p5-SNMP-Info: Makefile distinfo

Log Message:
Update to 3.27

Upstream changes:
version 3.27 (2015-05-05)

  [ENHANCEMENTS]

  * Cisco Aironet PSU information
  * Only log adding mibdirs at debug level 2

  [BUG FIXES]

  * [#221] Drop Cisco Voice VLAN 4096

version 3.26 (2015-03-07)

  [ENHANCEMENTS]

  * Add fan and psu reporting to Layer3::Dell
  * Include Voice VLANs in (tagged) VLAN Membership on Cisco devices

  [BUG FIXES]

  * Fix typo in MRO::print_superclasses

version 3.25 (2015-02-25)

  [ENHANCEMENTS]

    * Add new model name mappings for to Layer2::HP

version 3.24 (2015-02-04)

   [ENHANCEMENTS]

    * Support RSTP and ieee8021d STP operating modes in RapidCity

   [BUG FIXES]

    * Fix single instance leafs defined in %FUNCS to behave like table leafs
    * Fix incorrect FDB ID to VLAN ID mapping in Bridge and L3:Enterasys

version 3.23 (2014-12-09)

   [ENHANCEMENTS]

    * Update MIB used in L1::Asante
    * Enhanced STP support for L3::Extreme

   [BUG FIXES]

    * Fix Cisco VLAN membership issue introduced in 3.22 related to capturing
      port VLANs on Cisco interfaces which are configured for trunking but
      are not in operational trunking mode

version 3.22 (2014-12-02)

   [NEW FEATURES]

    * Support obtaining FDB in Avaya SPBM edge deployments in L2::Baystack
      NOTE: This requires a RAPID-CITY MIB with the rcBridgeSpbmMacTable
    * Support for Fortinet devices in new class L3::Fortinet

   [ENHANCEMENTS]

    * Include LLDP support in base Layer2 and Layer3 classes. Due to the
      widespread adoption of LLDP, this should improve mapping networks
      when devices aren't supported in a more specific class.
    * No longer ignore interfaces based on name, in base L2/L3/L7 device
      classes. For several device classes SNMP::Info will now return tunnel
      interfaces and/or loopbacks, if present.
    * Use dot1qVlanCurrentTable if available to capture dynamic and static
      VLANs, fall back to dot1qVlanStaticTable if not available.
    * New method i_vlan_membership_untagged() for VLANs transmitted as
      untagged frames.
    * Capture Aruba AP hardware and software version when available
    * New STP methods to support gathering information from devices running
      mutiple STP instances such as PVST and MST
    * Enhanced STP support for Avaya and Foundry classes

   [BUG FIXES]

    * [#64] Misdetection: Wireless APs, add products MIB to L2::3Com
    * Use FDB ID to VID mapping if available to determine end station VLAN
      rather than assuming they are the same.
    * Capture port VLANs on Cisco interfaces which are configured for
      trunking but are not in operational trunking mode
    * Correct munging of stp_p_port(), i_stp_port(), and stp_root() methods
      in Bridge
    * In LLDP.pm don't create a variable in a conditional

version 3.20 (2014-09-08)

   [NEW FEATURES]

    * Override layers in Juniper for routers with switch modules

   [BUG FIXES]

    * Update MANIFEST to include Ubiquiti files

version 3.19 (2014-08-01)

   [NEW FEATURES]

    * Support for Ubiquiti Access Points in new class L2::Ubiquiti (begemot)
    * Preliminary support for 3Com switches in new class L2::3Com (begemot)

   [BUG FIXES]

    * Fix Avaya detection lldp_port()
    * Silence uninitialized value warning in L3::Cisco
    * H3C fixes (begemot)
    * Only use L2::ZyXEL_DSLAM for ZyXEL DSL modules

version 3.18 (2014-07-02)

   [ENHANCEMENTS]

    * Pseudo ENTITY-MIB methods added to L3::Tasman for hardware information
    * Capture VPC Keepalive IP addresses in L3::Nexus (jeroenvi)
    * L2::Netgear inheritance clean up and removal of unnecessary c_* methods
      defined in Info base class

   [BUG FIXES]

    * Correctly identify device type (class) for instantiated objects which
      have overridden layers.
    * [#58] Fix inheritance in L3::FWSM and L3::CiscoASA
    * [#71] Don't try to match on a false port description in lldp_if
    * [#54] Possible bad values returned for cdp_id and lldp_port with some HP
      gear (Joel Leonhardt)

version 3.17 (2014-06-23)

   [ENHANCEMENTS]

    * POD tests are not required for distribution.

version 3.16 (2014-06-23)

   [ENHANCEMENTS]

    * Add method resolution discovery in SNMP::Info::MRO helper module
    * Consolidate CiscoImage class into CiscoStats class
    * Clean up inheritance for Cisco classes.  With this change
      all applicable classes now inherit CiscoAgg, CiscoStpExtensions,
      CiscoPortSecurity, CiscoPower, and LLDP classes.
    * Remove inheritance of classes the devices do not support in L3::FWSM
      and L3::CiscoASA

   [BUG FIXES]

    * Use CiscoVTP methods to get interface VLAN in L3::Cisco rather than
      solely relying on the interface description.

version 3.15 (2014-07-10)

   [NEW FEATURES]

    * Offline mode and Cache export/priming.

   [ENHANCEMENTS]

    * Return serial number for Cisco 3850 from entPhysicalSerialNum

   [BUG FIXES]

    * Cisco SB serial number probably did not work

version 3.14 (2014-06-07)

   [ENHANCEMENTS]

    * Improvements to Mikrotik module (Alex Z)
    * Don't unshift length from broken lldpRemManAddrTable implementations (G. Shtern)
    * 802.3ad LAG support in Layer3::H3C
    * Add LLDP capabilities to Layer2::HPVC class

   [BUG FIXES]

    * Return correct VLAN info with qb_fw_table() on Layer2::HP

version 3.13 (2014-03-27)

   [ENHANCEMENTS]

    * Cisco PAgP support added to LAG method
    * HP ProCurve LAG support by inheriting Info::Aggregate class

version 3.12 (2014-02-10)

   [ENHANCEMENTS]

    * Modify L3::Passport to obtain forwarding table information from
      RAPID-CITY if information is not available in either Q-BRIDGE-MIB or
      BRIDGE-MIB.  Needed for VSP 9000 prior to version 4.x (Tobias Gerlach)

   [BUG FIXES]

    * [#52] NETSCREEN-IP-ARP-MIB considered harmful
    * Foundry/Brocade aggreate port master ifIndex resolved properly

version 3.11 (2014-01-26)

   [NEW FEATURES]

    * [#31] port-channel (aggregate) support.  Aggregate support added in new
      agg_ports() method.  Inital support added for Arista (ifStack),
      Avaya (MLT), Brocade (MST), and Cisco (802.3ad).

   [ENHANCEMENTS]

    * Use Q-BRIDGE-MIB as default with fallback to BRIDGE-MIB across all
      classes for the fw_mac, fw_port, and fw_status methods
    * Additional support for Avaya 8800 series in L3::Passport

   [BUG FIXES]

    * Modify cdp_cap() to handle devices which return space delimited strings
      for cdpCacheCapabilities rather than hex strings
    * [#51] Netdisco shows broken topology for devices with no alias entry
      for primary IP - Collect nsIfMngIp when getting IP interfaces in
      L3::Netscreen
    * Fix Extreme XOS i_vlan_membership - Revert [28bbe0], fix bug with
      untagged being added to @ret twice (Robert Kerr)
    * Skip default CPU management addresses on VSP and 8800/8600 series in
      L3::Passport to prevent erroneous duplicate addresses

version 3.10 (2013-12-16)

   [BUG FIXES]

    * Data values of zero are now sent to munge method instead of skipped

version 3.09 (2013-12-15)

   [NEW FEATURES]

    * [#45] IBM (Blade Network Technologies) Rackswitch support in new class
      L3::IBMGbTor
    * [] set_i_untagged combines both set_i_vlan and set_i_pvid in one method
    * [#41] Riverbed Steelhead support added in new class L3::Steelhead
    * New c_cap(), cdp_cap(), and lldp_cap() methods which return a hash of
      arrays with each array containing the system capabilities reported as
      supported by the remote system via CDP or LLDP.

   [ENHANCEMENTS]

    * Remove "Switch" from model name in L3::Foundry
    * [#49] IOS-XR support, add identification of IOS XR and version in
      CiscoStats
    * Aruba POE Support
    * Aruba utilizes Q-BRIDGE-MIB when available for VLAN information to
      better support wired switches
    * Add lldp_platform() method which uses lldp_rem_sysdesc() or
      lldp_rem_sysname() to provide a clue to type of remote LLDP capable
      device.
    * [RT#78232] Extend cdpCacheCapabilities to show more CDP bits

   [BUG FIXES]

    * Modify _xos_i_vlan_membership() in L3::Extreme to only include tagged
      ports
    * When determining the BSSID in Airespace there is only one hexadecimal
      digit available so skip if outside the range of 1-16, 17 is reserved
      for 3rd party AP's
    * Don't assume entity index 1 is the chassis and has serial in Layer3
    * Capture serial number on newer Aruba devices
    * munge_bits() correctly unpacks BITS
    * Fix for single instance table leafs in test_class_mocked.pl
    * Fix power module indexing

version 3.08 (2013-10-22)

   [ENHANCEMENTS]

    * Rewrite of L3::Aruba, now supports pseudo ENTITY-MIB methods to gather
      module information, more interface information for APs, more
      wireless information to include client stats, and arpnip information
      from wireless clients.  WARNING: AP device interfaces are now based on
      AP MAC and radio versus BSSID to align with other wireless classes.
    * [#64] Add i_speed_admin() to L2::2900 (psychiatric)
    * [#66] Support for VSS via CISCO-VIRTUAL-SWITCH-MIB in L3::6500
    * [#67] Add the possibility to set speed for Layer3::C4000 (psychiatric)
    * [#69] set speed and duplex on Cisco VSS system (psychiatric)
    * munge_null() now removes all non-printable control characters
    * Support Aironet standalone access points (Layer2::Aironet) running IOS15
    * lldp_port() returns port ID instead of port description if the port ID
      subtype is "interface name".  This improves the ability to correlate
      ports by name when a port description is also set.
    * Add docs note about make_snmpdata.pl under EXTENDING SNMP::Info
    * [#46] Brocade (Foundry) Module Support
    * Brocade (Foundry) POE Support
    * Support peth_port_power() power supplied by PoE ports in L2::Baystack
    * Update test_class.pl utility to allow ignore of snmp.conf and test
      summarize more standard class methods
    * On EOS, the LLDP port ID is a dot1d port
    * Use LLDP in Layer3::Aruba, for switches
    * Clean up more model names in L2::Baystack

   [BUG FIXES]

    * [#68] Fix device_port entries for switches with non-unique
      ifDesc (Nic Bernstein)
    * Don't try to munge undef values
    * [#49] Perl 5.18 UNIVERSAL::can change could cause infinite loop
    * Silence warning from uninitialized variable in L3::Passport e_descr()

version 3.07 (2013-10-01)

   [ENHANCEMENTS]

    * Support for Pica8 switches in L3::Pica8
    * Factor out cache/munge code from global/attr methods

   [BUG FIXES]

   * [#48] Switch duplicate J9624A for J9626A in Layer2/HP (R. Kerr)
   * Correct device serial number reporting for Nexus devices
   * Override ipAddrTable methods in L3::Nexus as some versions do not
     index the table with the IPv4 address in accordance with the MIB
     definition.

version 3.05 (2013-08-16)

   [ENHANCEMENTS]

    * [#47] Add model info on HP 2530 and HP 2920 series
    * Add support for Cisco Small Business series
      Layer2/CiscoSB class
    * Add proper LLDP support to Netgear.pm
    * Change $netgear->interfaces() to use ifName rather than ifDescr
      as the former is unique per interface while the latter is not.
      If ifName is not present, concatenate ifDescr and ifIndex
      to achieve a unique value.
    * Properly report hardware version, Serial No. and OS Version for
      Netgear.

version 3.03 (2013-07-11)

    [BUG FIXES]

    * Add missing =back to POD (A. Hartmaier)

version 3.02 (2013-07-08)

    [ENHANCEMENTS]

    * Properly pull os_ver from Netgear GS series switches.
    * Support Alcatel devices with layer3 features.
    * Identify Cisco Aironet 1140 APs as Layer2::Aironet
    * LAN switch support added to Layer3::Aruba class
    * [RT#86725] - Identify Cisco Catalyst 3850 as Layer3::C6500 (C. Causer)

version 3.01 (2013-04-13)

    [API Changes]

    * The methods c_ip(), c_if(), c_port(), c_id(), and c_platform() now
      represent common topology methods and will try to return a combined
      hash of data from all L2 topology protocols either running on the
      device or specified in the method call.  The topology specific methods
      have been been prefixed with the protocol name in lowercase so that
      they can be called directly, sonmp_ip(), cdp_ip(), etc.
    * L2::Bay and L2::Foundry have been removed from the distribution.  Both
      classes were depreciated and all functionality is available through
      L2::Baystack and L3::Foundry.

    [NEW FEATURES]

    * [3160037] - Support _raw suffix on methods to skip munging
    * [3185391] - Support for F5 devices in new class L3::F5
    * [3323814] - Arp support for Netscreen (David Baldwin)
    * [3323821] - Support for Netscreen w/ WLAN (eg SSG5) (David Baldwin)
    * [3599277] - Q-BRIDGE Support to collect VLAN in macsuck
    * [3033731] - Alcatel-Lucent OmniSwich AMAP Support in new AMAP class
    * [3598896] - Lantronix device support (J R Binks)
    * [3598337] - Lantronix SLC support
    * Support for Cisco ASA in L3::CiscoASA (Kraus/Hartmaier/Bernstein)
    * Support for Avaya VSP 9000 series in L3::Passport
    * Support for Avaya VSP 7000 series in L2::Baystack
    * Support Avaya (Trapeze) Wireless Controllers in new class L2::NWSS2300
    * Support Juniper (Trapeze) Wireless Controllers in new class L2::Trapeze
    * Support for newer Radware Alteon ADC switches 4408/4416/5412/5224 and
      older AWS 2000/3000 series in existing L3::AlteonAD
    * Support for H3C & HP A-series in new class L3::H3C
    * Support for Citrix Netscaler appliances in new class L7::Netscaler
    * New configuration option IgnoreNetSNMPConf will ignore Net-SNMP
      configuration files on object initialization
    * Two new utilities added in t/util to assist in developing device
      support; make_snmpdata.pl gathers SNMP data (snmpwalk) in a format that
      can be used with test_class_mocked.pl which mocks an SNMP agent to
      enable testing with no network access to a device.

    [ENHANCEMENTS]

    * UNIVERSAL::can() now works with dynamic methods
    * Dynamically generated methods are added to symbol table to avoid
      AUTOLOAD on subsequent calls
    * L2::Airespace now supports 802.11n client tx rates
    * L2::Airespace now reports AP Ethernet MAC as port MAC for radio ports
    * CiscoStats improvements to determine os versions, eg IOS XE ver on Sup7L-E
    * CiscoStats now reports 'ios-xe' if the device runs IOS XE (used to be 'ios')
    * Improved support of XOS based Extreme devices

    [BUG FIXES]

    * [3564920] - lldp_if gives wrong data for Enterasys

version 2.11 (2012-12-09)

    [BUG FIXES]

    * Add fall-back for sysDescr on Force10

version 2.10 (2012-12-08)

    [NEW FEATURES]

    * Support for Force10 devices (W. Bulley)


To generate a diff of this commit:
cvs rdiff -u -r1.19 -r1.20 pkgsrc/net/p5-SNMP-Info/Makefile
cvs rdiff -u -r1.8 -r1.9 pkgsrc/net/p5-SNMP-Info/distinfo

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.