CVS commit: pkgsrc/www/libecap

["Patrick Welche" <prlw1%netbsd.org@localhost>]

Module Name:    pkgsrc
Committed By:   prlw1
Date:           Fri Jun 17 16:39:55 UTC 2016

Added Files:
        pkgsrc/www/libecap: DESCR Makefile PLIST buildlink3.mk distinfo

Log Message:
Add libecap 1.0.1

eCAP is a software interface that allows a network application,
such as an HTTP proxy or an ICAP server, to outsource content
analysis and adaptation to a loadable module. For each applicable
protocol message being processed, an eCAP-enabled host application
supplies the message details to the adaptation module and gets back
an adapted message, a "not interested" response, or a "block this
message now!" instruction.  These exchanges often include message
bodies.

The adaptation module can also exchange meta-information with the
host application to supply additional details such as configuration
options, a reason behind the decision to ignore a message, or a
detected virus name.

If you are familiar with the ICAP protocol (RFC 3507), then you
may think of eCAP as an "embedded ICAP", where network interactions
with an ICAP server are replaced with function calls to an adaptation
module.

The libecap library implements the eCAP API in C++.


To generate a diff of this commit:
cvs rdiff -u -r0 -r1.1 pkgsrc/www/libecap/DESCR pkgsrc/www/libecap/Makefile \
    pkgsrc/www/libecap/PLIST pkgsrc/www/libecap/buildlink3.mk \
    pkgsrc/www/libecap/distinfo

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.

Added files:

Index: pkgsrc/www/libecap/DESCR
diff -u /dev/null pkgsrc/www/libecap/DESCR:1.1
--- /dev/null   Fri Jun 17 16:39:55 2016
+++ pkgsrc/www/libecap/DESCR    Fri Jun 17 16:39:55 2016
@@ -0,0 +1,20 @@
+eCAP is a software interface that allows a network application,
+such as an HTTP proxy or an ICAP server, to outsource content
+analysis and adaptation to a loadable module. For each applicable
+protocol message being processed, an eCAP-enabled host application
+supplies the message details to the adaptation module and gets back
+an adapted message, a "not interested" response, or a "block this
+message now!" instruction.  These exchanges often include message
+bodies.
+
+The adaptation module can also exchange meta-information with the
+host application to supply additional details such as configuration
+options, a reason behind the decision to ignore a message, or a
+detected virus name.
+
+If you are familiar with the ICAP protocol (RFC 3507), then you
+may think of eCAP as an "embedded ICAP", where network interactions
+with an ICAP server are replaced with function calls to an adaptation
+module.
+
+The libecap library implements the eCAP API in C++.
Index: pkgsrc/www/libecap/Makefile
diff -u /dev/null pkgsrc/www/libecap/Makefile:1.1
--- /dev/null   Fri Jun 17 16:39:55 2016
+++ pkgsrc/www/libecap/Makefile Fri Jun 17 16:39:55 2016
@@ -0,0 +1,19 @@
+# $NetBSD: Makefile,v 1.1 2016/06/17 16:39:55 prlw1 Exp $
+
+DISTNAME=      libecap-1.0.1
+CATEGORIES=    www
+MASTER_SITES=  http://www.measurement-factory.com/tmp/ecap/
+
+MAINTAINER=    prlw1%cam.ac.uk@localhost
+HOMEPAGE=      http://www.e-cap.org/
+COMMENT=       C++ implementation of eCAP API
+LICENSE=       2-clause-bsd
+
+GNU_CONFIGURE= yes
+USE_LANGUAGES= c c++
+USE_LIBTOOL=   yes
+USE_TOOLS+=    pkg-config
+
+PKGCONFIG_OVERRIDE+=   libecap.pc.in
+
+.include "../../mk/bsd.pkg.mk"
Index: pkgsrc/www/libecap/PLIST
diff -u /dev/null pkgsrc/www/libecap/PLIST:1.1
--- /dev/null   Fri Jun 17 16:39:55 2016
+++ pkgsrc/www/libecap/PLIST    Fri Jun 17 16:39:55 2016
@@ -0,0 +1,25 @@
+@comment $NetBSD: PLIST,v 1.1 2016/06/17 16:39:55 prlw1 Exp $
+include/libecap/adapter/service.h
+include/libecap/adapter/xaction.h
+include/libecap/common/area.h
+include/libecap/common/autoconf.h
+include/libecap/common/body.h
+include/libecap/common/body_size.h
+include/libecap/common/delay.h
+include/libecap/common/errors.h
+include/libecap/common/forward.h
+include/libecap/common/header.h
+include/libecap/common/libecap.h
+include/libecap/common/log.h
+include/libecap/common/memory.h
+include/libecap/common/message.h
+include/libecap/common/name.h
+include/libecap/common/named_values.h
+include/libecap/common/names.h
+include/libecap/common/options.h
+include/libecap/common/registry.h
+include/libecap/common/version.h
+include/libecap/host/host.h
+include/libecap/host/xaction.h
+lib/libecap.la
+lib/pkgconfig/libecap.pc
Index: pkgsrc/www/libecap/buildlink3.mk
diff -u /dev/null pkgsrc/www/libecap/buildlink3.mk:1.1
--- /dev/null   Fri Jun 17 16:39:55 2016
+++ pkgsrc/www/libecap/buildlink3.mk    Fri Jun 17 16:39:55 2016
@@ -0,0 +1,12 @@
+# $NetBSD: buildlink3.mk,v 1.1 2016/06/17 16:39:55 prlw1 Exp $
+
+BUILDLINK_TREE+=       libecap
+
+.if !defined(LIBECAP_BUILDLINK3_MK)
+LIBECAP_BUILDLINK3_MK:=
+
+BUILDLINK_API_DEPENDS.libecap+=        libecap>=1.0.1
+BUILDLINK_PKGSRCDIR.libecap?=  ../../www/libecap
+.endif # LIBECAP_BUILDLINK3_MK
+
+BUILDLINK_TREE+=       -libecap
Index: pkgsrc/www/libecap/distinfo
diff -u /dev/null pkgsrc/www/libecap/distinfo:1.1
--- /dev/null   Fri Jun 17 16:39:55 2016
+++ pkgsrc/www/libecap/distinfo Fri Jun 17 16:39:55 2016
@@ -0,0 +1,6 @@
+$NetBSD: distinfo,v 1.1 2016/06/17 16:39:55 prlw1 Exp $
+
+SHA1 (libecap-1.0.1.tar.gz) = 89533c2ac77fee7b26f53c20c25a1423ce1498b7
+RMD160 (libecap-1.0.1.tar.gz) = 72cac0074be057805511d33156baacb0eeaef4ed
+SHA512 (libecap-1.0.1.tar.gz) = 0054ad11b3f558d7c623060a69207a1b8e679803cabdf1a2bce4b04335d71c016eec770fc9d2cbf3d0a93502c255cb528305f9f8e6df4e095fcb980667045919
+Size (libecap-1.0.1.tar.gz) = 339799 bytes