pkgsrc-Changes archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
CVS commit: pkgsrc/net/wpa_supplicant
Module Name: pkgsrc
Committed By: maya
Date: Wed Aug 17 04:57:47 UTC 2016
Modified Files:
pkgsrc/net/wpa_supplicant: Makefile distinfo
Added Files:
pkgsrc/net/wpa_supplicant/patches: patch-src_utils_common.h
Log Message:
Update wpa_supplicant to v2.5
Changelog:
2015-09-27 - v2.5
* fixed P2P validation of SSID element length before copying it
[http://w1.fi/security/2015-1/] (CVE-2015-1863)
* fixed WPS UPnP vulnerability with HTTP chunked transfer encoding
[http://w1.fi/security/2015-2/] (CVE-2015-4141)
* fixed WMM Action frame parser (AP mode)
[http://w1.fi/security/2015-3/] (CVE-2015-4142)
* fixed EAP-pwd peer missing payload length validation
[http://w1.fi/security/2015-4/]
(CVE-2015-4143, CVE-2015-4144, CVE-2015-4145, CVE-2015-4146)
* fixed validation of WPS and P2P NFC NDEF record payload length
[http://w1.fi/security/2015-5/]
* nl80211:
- added VHT configuration for IBSS
- fixed vendor command handling to check OUI properly
- allow driver-based roaming to change ESS
* added AVG_BEACON_RSSI to SIGNAL_POLL output
* wpa_cli: added tab completion for number of commands
* removed unmaintained and not yet completed SChannel/CryptoAPI support
* modified Extended Capabilities element use in Probe Request frames to
include all cases if any of the values are non-zero
* added support for dynamically creating/removing a virtual interface
with interface_add/interface_remove
* added support for hashed password (NtHash) in EAP-pwd peer
* added support for memory-only PSK/passphrase (mem_only_psk=1 and
CTRL-REQ/RSP-PSK_PASSPHRASE)
* P2P
- optimize scan frequencies list when re-joining a persistent group
- fixed number of sequences with nl80211 P2P Device interface
- added operating class 125 for P2P use cases (this allows 5 GHz
channels 161 and 169 to be used if they are enabled in the current
regulatory domain)
- number of fixes to P2PS functionality
- do not allow 40 MHz co-ex PRI/SEC switch to force MCC
- extended support for preferred channel listing
* D-Bus:
- fixed WPS property of fi.w1.wpa_supplicant1.BSS interface
- fixed PresenceRequest to use group interface
- added new signals: FindStopped, WPS pbc-overlap,
GroupFormationFailure, WPS timeout, InvitationReceived
- added new methods: WPS Cancel, P2P Cancel, Reconnect, RemoveClient
- added manufacturer info
* added EAP-EKE peer support for deriving Session-Id
* added wps_priority configuration parameter to set the default priority
for all network profiles added by WPS
* added support to request a scan with specific SSIDs with the SCAN
command (optional "ssid <hexdump>" arguments)
* removed support for WEP40/WEP104 as a group cipher with WPA/WPA2
* fixed SAE group selection in an error case
* modified SAE routines to be more robust and PWE generation to be
stronger against timing attacks
* added support for Brainpool Elliptic Curves with SAE
* added support for CCMP-256 and GCMP-256 as group ciphers with FT
* fixed BSS selection based on estimated throughput
* added option to disable TLSv1.0 with OpenSSL
(phase1="tls_disable_tlsv1_0=1")
* added Fast Session Transfer (FST) module
* fixed OpenSSL PKCS#12 extra certificate handling
* fixed key derivation for Suite B 192-bit AKM (this breaks
compatibility with the earlier version)
* added RSN IE to Mesh Peering Open/Confirm frames
* number of small fixes
2015-03-15 - v2.4
* allow OpenSSL cipher configuration to be set for internal EAP server
(openssl_ciphers parameter)
* fixed number of small issues based on hwsim test case failures and
static analyzer reports
* P2P:
- add new=<0/1> flag to P2P-DEVICE-FOUND events
- add passive channels in invitation response from P2P Client
- enable nl80211 P2P_DEVICE support by default
- fix regresssion in disallow_freq preventing search on social
channels
- fix regressions in P2P SD query processing
- try to re-invite with social operating channel if no common channels
in invitation
- allow cross connection on parent interface (this fixes number of
use cases with nl80211)
- add support for P2P services (P2PS)
- add p2p_go_ctwindow configuration parameter to allow GO CTWindow to
be configured
* increase postponing of EAPOL-Start by one second with AP/GO that
supports WPS 2.0 (this makes it less likely to trigger extra roundtrip
of identity frames)
* add support for PMKSA caching with SAE
* add support for control mesh BSS (IEEE 802.11s) operations
* fixed number of issues with D-Bus P2P commands
* fixed regression in ap_scan=2 special case for WPS
* fixed macsec_validate configuration
* add a workaround for incorrectly behaving APs that try to use
EAPOL-Key descriptor version 3 when the station supports PMF even if
PMF is not enabled on the AP
* allow TLS v1.1 and v1.2 to be negotiated by default; previous behavior
of disabling these can be configured to work around issues with broken
servers with phase1="tls_disable_tlsv1_1=1 tls_disable_tlsv1_2=1"
* add support for Suite B (128-bit and 192-bit level) key management and
cipher suites
* add WMM-AC support (WMM_AC_ADDTS/WMM_AC_DELTS)
* improved BSS Transition Management processing
* add support for neighbor report
* add support for link measurement
* fixed expiration of BSS entry with all-zeros BSSID
* add optional LAST_ID=x argument to LIST_NETWORK to allow all
configured networks to be listed even with huge number of network
profiles
* add support for EAP Re-Authentication Protocol (ERP)
* fixed EAP-IKEv2 fragmentation reassembly
* improved PKCS#11 configuration for OpenSSL
* set stdout to be line-buffered
* add TDLS channel switch configuration
* add support for MAC address randomization in scans with nl80211
* enable HT for IBSS if supported by the driver
* add BSSID black and white lists (bssid_blacklist, bssid_whitelist)
* add support for domain_suffix_match with GnuTLS
* add OCSP stapling client support with GnuTLS
* include peer certificate in EAP events even without a separate probe
operation; old behavior can be restored with cert_in_cb=0
* add peer ceritficate alt subject name to EAP events
(CTRL-EVENT-EAP-PEER-ALT)
* add domain_match network profile parameter (similar to
domain_suffix_match, but full match is required)
* enable AP/GO mode HT Tx STBC automatically based on driver support
* add ANQP-QUERY-DONE event to provide information on ANQP parsing
status
* allow passive scanning to be forced with passive_scan=1
* add a workaround for Linux packet socket behavior when interface is in
bridge
* increase 5 GHz band preference in BSS selection (estimate SNR, if info
not available from driver; estimate maximum throughput based on common
HT/VHT/specific TX rate support)
* add INTERWORKING_ADD_NETWORK ctrl_iface command; this can be used to
implement Interworking network selection behavior in upper layers
software components
* add optional reassoc_same_bss_optim=1 (disabled by default)
optimization to avoid unnecessary Authentication frame exchange
* extend TDLS frame padding workaround to cover all packets
* allow wpa_supplicant to recover nl80211 functionality if the cfg80211
module gets removed and reloaded without restarting wpa_supplicant
* allow hostapd DFS implementation to be used in wpa_supplicant AP mode
2014-10-09 - v2.3
* fixed number of minor issues identified in static analyzer warnings
* fixed wfd_dev_info to be more careful and not read beyond the buffer
when parsing invalid information for P2P-DEVICE-FOUND
* extended P2P and GAS query operations to support drivers that have
maximum remain-on-channel time below 1000 ms (500 ms is the current
minimum supported value)
* added p2p_search_delay parameter to make the default p2p_find delay
configurable
* improved P2P operating channel selection for various multi-channel
concurrency cases
* fixed some TDLS failure cases to clean up driver state
* fixed dynamic interface addition cases with nl80211 to avoid adding
ifindex values to incorrect interface to skip foreign interface events
properly
* added TDLS workaround for some APs that may add extra data to the
end of a short frame
* fixed EAP-AKA' message parser with multiple AT_KDF attributes
* added configuration option (p2p_passphrase_len) to allow longer
passphrases to be generated for P2P groups
* fixed IBSS channel configuration in some corner cases
* improved HT/VHT/QoS parameter setup for TDLS
* modified D-Bus interface for P2P peers/groups
* started to use constant time comparison for various password and hash
values to reduce possibility of any externally measurable timing
differences
* extended explicit clearing of freed memory and expired keys to avoid
keeping private data in memory longer than necessary
* added optional scan_id parameter to the SCAN command to allow manual
scan requests for active scans for specific configured SSIDs
* fixed CTRL-EVENT-REGDOM-CHANGE event init parameter value
* added option to set Hotspot 2.0 Rel 2 update_identifier in network
configuration to support external configuration
* modified Android PNO functionality to send Probe Request frames only
for hidden SSIDs (based on scan_ssid=1)
* added generic mechanism for adding vendor elements into frames at
runtime (VENDOR_ELEM_ADD, VENDOR_ELEM_GET, VENDOR_ELEM_REMOVE)
* added fields to show unrecognized vendor elements in P2P_PEER
* removed EAP-TTLS/MSCHAPv2 interoperability workaround so that
MS-CHAP2-Success is required to be present regardless of
eap_workaround configuration
* modified EAP fast session resumption to allow results to be used only
with the same network block that generated them
* extended freq_list configuration to apply for sched_scan as well as
normal scan
* modified WPS to merge mixed-WPA/WPA2 credentials from a single session
* fixed nl80211/RTM_DELLINK processing when a P2P GO interface is
removed from a bridge
* fixed number of small P2P issues to make negotiations more robust in
corner cases
* added experimental support for using temporary, random local MAC
address (mac_addr and preassoc_mac_addr parameters); this is disabled
by default (i.e., previous behavior of using permanent address is
maintained if configuration is not changed)
* added D-Bus interface for setting/clearing WFD IEs
* fixed TDLS AID configuration for VHT
* modified -m<conf> configuration file to be used only for the P2P
non-netdev management device and do not load this for the default
station interface or load the station interface configuration for
the P2P management interface
* fixed external MAC address changes while wpa_supplicant is running
* started to enable HT (if supported by the driver) for IBSS
* fixed wpa_cli action script execution to use more robust mechanism
(CVE-2014-3686)
2014-06-04 - v2.2
* added DFS indicator to get_capability freq
* added/fixed nl80211 functionality
- BSSID/frequency hint for driver-based BSS selection
- fix tearing down WDS STA interfaces
- support vendor specific driver command
(VENDOR <vendor id> <sub command id> [<hex formatted data>])
- GO interface teardown optimization
- allow beacon interval to be configured for IBSS
- add SHA256-based AKM suites to CONNECT/ASSOCIATE commands
* removed unused NFC_RX_HANDOVER_REQ and NFC_RX_HANDOVER_SEL control
interface commands (the more generic NFC_REPORT_HANDOVER is now used)
* fixed MSCHAP UTF-8 to UCS-2 conversion for three-byte encoding;
this fixes password with include UTF-8 characters that use
three-byte encoding EAP methods that use NtPasswordHash
* fixed couple of sequencies where radio work items could get stuck,
e.g., when rfkill blocking happens during scanning or when
scan-for-auth workaround is used
* P2P enhancements/fixes
- enable enable U-APSD on GO automatically if the driver indicates
support for this
- fixed some service discovery cases with broadcast queries not being
sent to all stations
- fixed Probe Request frame triggering invitation to trigger only a
single invitation instance even if multiple Probe Request frames are
received
- fixed a potential NULL pointer dereference crash when processing an
invalid Invitation Request frame
- add optional configuration file for the P2P_DEVICE parameters
- optimize scan for GO during persistent group invocation
- fix possible segmentation fault when PBC overlap is detected while
using a separate P2P group interface
- improve GO Negotiation robustness by allowing GO Negotiation
Confirmation to be retransmitted
- do use freed memory on device found event when P2P NFC
* added phase1 network parameter options for disabling TLS v1.1 and v1.2
to allow workarounds with misbehaving AAA servers
(tls_disable_tlsv1_1=1 and tls_disable_tlsv1_2=1)
* added support for OCSP stapling to validate AAA server certificate
during TLS exchange
* Interworking/Hotspot 2.0 enhancements
- prefer the last added network in Interworking connection to make the
behavior more consistent with likely user expectation
- roaming partner configuration (roaming_partner within a cred block)
- support Hotspot 2.0 Release 2
* "hs20_anqp_get <BSSID> 8" to request OSU Providers list
* "hs20_icon_request <BSSID> <icon filename>" to request icon files
* "fetch_osu" and "cancel_osu_fetch" to start/stop full OSU provider
search (all suitable APs in scan results)
* OSEN network for online signup connection
* min_{dl,ul}_bandwidth_{home,roaming} cred parameters
* max_bss_load cred parameter
* req_conn_capab cred parameter
* sp_priority cred parameter
* ocsp cred parameter
* slow down automatic connection attempts on EAP failure to meet
required behavior (no more than 10 retries within a 10-minute
interval)
* sample implementation of online signup client (both SPP and
OMA-DM protocols) (hs20/client/*)
- fixed GAS indication for additional comeback delay with status
code 95
- extend ANQP_GET to accept Hotspot 2.0 subtypes
ANQP_GET <addr> <info id>[,<info id>]...
[,hs20:<subtype>][...,hs20:<subtype>]
- add control interface events CRED-ADDED <id>,
CRED-MODIFIED <id> <field>, CRED-REMOVED <id>
- add "GET_CRED <id> <field>" command
- enable FT for the connection automatically if the AP advertises
support for this
- fix a case where auto_interworking=1 could end up stopping scanning
* fixed TDLS interoperability issues with supported operating class in
some deployed stations
* internal TLS implementation enhancements/fixes
- add SHA256-based cipher suites
- add DHE-RSA cipher suites
- fix X.509 validation of PKCS#1 signature to check for extra data
* fixed PTK derivation for CCMP-256 and GCMP-256
* added "reattach" command for fast reassociate-back-to-same-BSS
* allow PMF to be enabled for AP mode operation with the ieee80211w
parameter
* added "get_capability tdls" command
* added option to set config blobs through control interface with
"SET blob <name> <hexdump>"
* D-Bus interface extensions/fixes
- make p2p_no_group_iface configurable
- declare ServiceDiscoveryRequest method properly
- export peer's device address as a property
- make reassociate command behave like the control interface one,
i.e., to allow connection from disconnected state
* added optional "freq=<channel ranges>" parameter to SET pno
* added optional "freq=<channel ranges>" parameter to SELECT_NETWORK
* fixed OBSS scan result processing for 20/40 MHz co-ex report
* remove WPS 1.0 only support, i.e., WSC 2.0 support is now enabled
whenever CONFIG_WPS=y is set
* fixed regression in parsing of WNM Sleep Mode exit key data
* fixed potential segmentation fault and memory leaks in WNM neighbor
report processing
* EAP-pwd fixes
- fragmentation of PWD-Confirm-Resp
- fix memory leak when fragmentation is used
- fix possible segmentation fault on EAP method deinit if an invalid
group is negotiated
* added MACsec/IEEE Std 802.1X-2010 PAE implementation (currently
available only with the macsec_qca driver wrapper)
* fixed EAP-SIM counter-too-small message
* added 'dup_network <id_s> <id_d> <name>' command; this can be used to
clone the psk field without having toextract it from wpa_supplicant
* fixed GSM authentication on USIM
* added support for usin epoll in eloop (CONFIG_ELOOP_EPOLL=y)
* fixed some concurrent virtual interface cases with dedicated P2P
management interface to not catch events from removed interface (this
could result in the management interface getting disabled)
* fixed a memory leak in SAE random number generation
* fixed off-by-one bounds checking in printf_encode()
- this could result in some control interface ATTACH command cases
terminating wpa_supplicant
* fixed EAPOL-Key exchange when GCMP is used with SHA256-based AKM
* various bug fixes
2014-02-04 - v2.1
* added support for simultaneous authentication of equals (SAE) for
stronger password-based authentication with WPA2-Personal
* improved P2P negotiation and group formation robustness
- avoid unnecessary Dialog Token value changes during retries
- avoid more concurrent scanning cases during full group formation
sequence
- do not use potentially obsolete scan result data from driver
cache for peer discovery/updates
- avoid undesired re-starting of GO negotiation based on Probe
Request frames
- increase GO Negotiation and Invitation timeouts to address busy
environments and peers that take long time to react to messages,
e.g., due to power saving
- P2P Device interface type
* improved P2P channel selection (use more peer information and allow
more local options)
* added support for optional per-device PSK assignment by P2P GO
(wpa_cli p2p_set per_sta_psk <0/1>)
* added P2P_REMOVE_CLIENT for removing a client from P2P groups
(including persistent groups); this can be used to securely remove
a client from a group if per-device PSKs are used
* added more configuration flexibility for allowed P2P GO/client
channels (p2p_no_go_freq list and p2p_add_cli_chan=0/1)
* added nl80211 functionality
- VHT configuration for nl80211
- MFP (IEEE 802.11w) information for nl80211 command API
- support split wiphy dump
- FT (IEEE 802.11r) with driver-based SME
- use advertised number of supported concurrent channels
- QoS Mapping configuration
* improved TDLS negotiation robustness
* added more TDLS peer parameters to be configured to the driver
* optimized connection time by allowing recently received scan results
to be used instead of having to run through a new scan
* fixed ctrl_iface BSS command iteration with RANGE argument and no
exact matches; also fixed argument parsing for some cases with
multiple arguments
* added 'SCAN TYPE=ONLY' ctrl_iface command to request manual scan
without executing roaming/network re-selection on scan results
* added Session-Id derivation for EAP peer methods
* added fully automated regression testing with mac80211_hwsim
* changed configuration parser to reject invalid integer values
* allow AP/Enrollee to be specified with BSSID instead of UUID for
WPS ER operations
* disable network block temporarily on repeated connection failures
* changed the default driver interface from wext to nl80211 if both are
included in the build
* remove duplicate networks if WPS provisioning is run multiple times
* remove duplicate networks when Interworking network selection uses the
same network
* added global freq_list configuration to allow scan frequencies to be
limited for all cases instead of just for a specific network block
* added support for BSS Transition Management
* added option to use "IFNAME=<ifname> " prefix to use the global
control interface connection to perform per-interface commands;
similarly, allow global control interface to be used as a monitor
interface to receive events from all interfaces
* fixed OKC-based PMKSA cache entry clearing
* fixed TKIP group key configuration with FT
* added support for using OCSP stapling to validate server certificate
(ocsp=1 as optional and ocsp=2 as mandatory)
* added EAP-EKE peer
* added peer restart detection for IBSS RSN
* added domain_suffix_match (and domain_suffix_match2 for Phase 2
EAP-TLS) to specify additional constraint for the server certificate
domain name
* added support for external SIM/USIM processing in EAP-SIM, EAP-AKA,
and EAP-AKA' (CTRL-REQ-SIM and CTRL-RSP-SIM commands over control
interface)
* added global bgscan configuration option as a default for all network
blocks that do not specify their own bgscan parameters
* added D-Bus methods for TDLS
* added more control to scan requests
- "SCAN freq=<freq list>" can be used to specify which channels are
scanned (comma-separated frequency ranges in MHz)
- "SCAN passive=1" can be used to request a passive scan (no Probe
Request frames are sent)
- "SCAN use_id" can be used to request a scan id to be returned and
included in event messages related to this specific scan operation
- "SCAN only_new=1" can be used to request the driver/cfg80211 to
report only BSS entries that have been updated during this scan
round
- these optional arguments to the SCAN command can be combined with
each other
* modified behavior on externally triggered scans
- avoid concurrent operations requiring full control of the radio when
an externally triggered scan is detected
- do not use results for internal roaming decision
* added a new cred block parameter 'temporary' to allow credential
blocks to be stored separately even if wpa_supplicant configuration
file is used to maintain other network information
* added "radio work" framework to schedule exclusive radio operations
for off-channel functionality
- reduce issues with concurrent operations that try to control which
channel is used
- allow external programs to request exclusive radio control in a way
that avoids conflicts with wpa_supplicant
* added support for using Protected Dual of Public Action frames for
GAS/ANQP exchanges when associated with PMF
* added support for WPS+NFC updates and P2P+NFC
- improved protocol for WPS
- P2P group formation/join based on NFC connection handover
- new IPv4 address assignment for P2P groups (ip_addr_* configuration
parameters on the GO) to replace DHCP
- option to fetch and report alternative carrier records for external
NFC operations
* various bug fixes
To generate a diff of this commit:
cvs rdiff -u -r1.15 -r1.16 pkgsrc/net/wpa_supplicant/Makefile
cvs rdiff -u -r1.7 -r1.8 pkgsrc/net/wpa_supplicant/distinfo
cvs rdiff -u -r0 -r1.1 \
pkgsrc/net/wpa_supplicant/patches/patch-src_utils_common.h
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Modified files:
Index: pkgsrc/net/wpa_supplicant/Makefile
diff -u pkgsrc/net/wpa_supplicant/Makefile:1.15 pkgsrc/net/wpa_supplicant/Makefile:1.16
--- pkgsrc/net/wpa_supplicant/Makefile:1.15 Sat Mar 5 11:29:14 2016
+++ pkgsrc/net/wpa_supplicant/Makefile Wed Aug 17 04:57:47 2016
@@ -1,14 +1,14 @@
-# $NetBSD: Makefile,v 1.15 2016/03/05 11:29:14 jperkin Exp $
+# $NetBSD: Makefile,v 1.16 2016/08/17 04:57:47 maya Exp $
#
-DISTNAME= wpa_supplicant-2.0
-PKGREVISION= 2
+DISTNAME= wpa_supplicant-2.5
CATEGORIES= net
MASTER_SITES= http://hostap.epitest.fi/releases/
MAINTAINER= reed%reedmedia.net@localhost
HOMEPAGE= http://hostap.epitest.fi/wpa_supplicant/
COMMENT= Wireless connection client daemon for WPA, WPA2, and WEP
+LICENSE= modified-bsd
USE_LANGUAGES= c
USE_TOOLS+= gmake
Index: pkgsrc/net/wpa_supplicant/distinfo
diff -u pkgsrc/net/wpa_supplicant/distinfo:1.7 pkgsrc/net/wpa_supplicant/distinfo:1.8
--- pkgsrc/net/wpa_supplicant/distinfo:1.7 Wed Nov 4 00:35:45 2015
+++ pkgsrc/net/wpa_supplicant/distinfo Wed Aug 17 04:57:47 2016
@@ -1,7 +1,8 @@
-$NetBSD: distinfo,v 1.7 2015/11/04 00:35:45 agc Exp $
+$NetBSD: distinfo,v 1.8 2016/08/17 04:57:47 maya Exp $
-SHA1 (wpa_supplicant-2.0.tar.gz) = 78a456ff3c4af4b9bae2e0908a40f48755ffc59c
-RMD160 (wpa_supplicant-2.0.tar.gz) = f9e4729de5c6bee0142986b114fdc3fffb7a28f2
-SHA512 (wpa_supplicant-2.0.tar.gz) = c3a599e1dfa5e0bb4b8d35ed49501696ce68c807ff458c1e3bff9ed5619c780f7117c6d8d7cb9a11351e9fad27cf83fc114f255c92552e7ba084de70c5f8e254
-Size (wpa_supplicant-2.0.tar.gz) = 2044281 bytes
+SHA1 (wpa_supplicant-2.5.tar.gz) = f82281c719d2536ec4783d9442c42ff956aa39ed
+RMD160 (wpa_supplicant-2.5.tar.gz) = 07bf2b9646b0d7dec3e3507e9ef04e71784c359f
+SHA512 (wpa_supplicant-2.5.tar.gz) = e3ca36ed10b4dae8f663e98ad230c8c059c952316c21a6b0638ecb1b40a5ef1b9083138ab45207cb764a17e870b4bd0625dd6efdb65856cb4dca13ccc0559e81
+Size (wpa_supplicant-2.5.tar.gz) = 2607336 bytes
SHA1 (patch-aa) = 998ba9cc4ef9ebd0b629a6368957da0f1159dda0
+SHA1 (patch-src_utils_common.h) = 3bf10d911822e4de657e12ee88e31d215a868fa0
Added files:
Index: pkgsrc/net/wpa_supplicant/patches/patch-src_utils_common.h
diff -u /dev/null pkgsrc/net/wpa_supplicant/patches/patch-src_utils_common.h:1.1
--- /dev/null Wed Aug 17 04:57:47 2016
+++ pkgsrc/net/wpa_supplicant/patches/patch-src_utils_common.h Wed Aug 17 04:57:47 2016
@@ -0,0 +1,19 @@
+$NetBSD: patch-src_utils_common.h,v 1.1 2016/08/17 04:57:47 maya Exp $
+
+--- src/utils/common.h.orig 2015-09-27 19:02:05.000000000 +0000
++++ src/utils/common.h
+@@ -11,6 +11,14 @@
+
+ #include "os.h"
+
++/*
++ * NetBSD net/if.h defines if_type as a macro,
++ * which conflicts with the use of it in the code.
++ */
++#if defined(__NetBSD__)
++#undef if_type
++#endif
++
+ #if defined(__linux__) || defined(__GLIBC__)
+ #include <endian.h>
+ #include <byteswap.h>
Home |
Main Index |
Thread Index |
Old Index