CVS commit: pkgsrc/devel

["Adam Ciarcinski" <adam%netbsd.org@localhost>]

Module Name:    pkgsrc
Committed By:   adam
Date:           Sun Oct 30 11:43:03 UTC 2016

Modified Files:
        pkgsrc/devel/git: Makefile.version
        pkgsrc/devel/git-base: Makefile distinfo

Log Message:
Git v2.10.2 Release Notes
=========================

Fixes since v2.10.1
-------------------

 * The code that parses the format parameter of for-each-ref command
   has seen a micro-optimization.

 * The "graph" API used in "git log --graph" miscounted the number of
   output columns consumed so far when drawing a padding line, which
   has been fixed; this did not affect any existing code as nobody
   tried to write anything after the padding on such a line, though.

 * Almost everybody uses DEFAULT_ABBREV to refer to the default
   setting for the abbreviation, but "git blame" peeked into
   underlying variable bypassing the macro for no good reason.

 * Doc update to clarify what "log -3 --reverse" does.

 * An author name, that spelled a backslash-quoted double quote in the
   human readable part "My \"double quoted\" name", was not unquoted
   correctly while applying a patch from a piece of e-mail.

 * The original command line syntax for "git merge", which was "git
   merge <msg> HEAD <parent>...", has been deprecated for quite some
   time, and "git gui" was the last in-tree user of the syntax.  This
   is finally fixed, so that we can move forward with the deprecation.

 * Codepaths that read from an on-disk loose object were too loose in
   validating what they are reading is a proper object file and
   sometimes read past the data they read from the disk, which has
   been corrected.  H/t to Gustavo Grieco for reporting.

 * "git worktree", even though it used the default_abbrev setting that
   ought to be affected by core.abbrev configuration variable, ignored
   the variable setting.  The command has been taught to read the
   default set of configuration variables to correct this.

 * A low-level function verify_packfile() was meant to show errors
   that were detected without dying itself, but under some conditions
   it didn't and died instead, which has been fixed.

 * When "git fetch" tries to find where the history of the repository
   it runs in has diverged from what the other side has, it has a
   mechanism to avoid digging too deep into irrelevant side branches.
   This however did not work well over the "smart-http" transport due
   to a design bug, which has been fixed.

 * When we started cURL to talk to imap server when a new enough
   version of cURL library is available, we forgot to explicitly add
   imap(s):// before the destination.  To some folks, that didn't work
   and the library tried to make HTTP(s) requests instead.

 * The ./configure script generated from configure.ac was taught how
   to detect support of SSL by libcurl better.

 * http.emptyauth configuration is a way to allow an empty username to
   pass when attempting to authenticate using mechanisms like
   Kerberos.  We took an unspecified (NULL) username and sent ":"
   (i.e. no username, no password) to CURLOPT_USERPWD, but did not do
   the same when the username is explicitly set to an empty string.

 * "git clone" of a local repository can be done at the filesystem
   level, but the codepath did not check errors while copying and
   adjusting the file that lists alternate object stores.

 * Documentation for "git commit" was updated to clarify that "commit
   -p <paths>" adds to the current contents of the index to come up
   with what to commit.

 * A stray symbolic link in $GIT_DIR/refs/ directory could make name
   resolution loop forever, which has been corrected.

 * The "submodule.<name>.path" stored in .gitmodules is never copied
   to .git/config and such a key in .git/config has no meaning, but
   the documentation described it and submodule.<name>.url next to
   each other as if both belong to .git/config.  This has been fixed.

 * Recent git allows submodule.<name>.branch to use a special token
   "." instead of the branch name; the documentation has been updated
   to describe it.

 * In a worktree connected to a repository elsewhere, created via "git
   worktree", "git checkout" attempts to protect users from confusion
   by refusing to check out a branch that is already checked out in
   another worktree.  However, this also prevented checking out a
   branch, which is designated as the primary branch of a bare
   reopsitory, in a worktree that is connected to the bare
   repository.  The check has been corrected to allow it.

 * "git rebase" immediately after "git clone" failed to find the fork
   point from the upstream.

 * When fetching from a remote that has many tags that are irrelevant
   to branches we are following, we used to waste way too many cycles
   when checking if the object pointed at by a tag (that we are not
   going to fetch!) exists in our repository too carefully.

 * The Travis CI configuration we ship ran the tests with --verbose
   option but this risks non-TAP output that happens to be "ok" to be
   misinterpreted as TAP signalling a test that passed.  This resulted
   in unnecessary failure.  This has been corrected by introducing a
   new mode to run our tests in the test harness to send the verbose
   output separately to the log file.

 * Some AsciiDoc formatter mishandles a displayed illustration with
   tabs in it.  Adjust a few of them in merge-base documentation to
   work around them.

Also contains minor documentation updates and code clean-ups.


To generate a diff of this commit:
cvs rdiff -u -r1.49 -r1.50 pkgsrc/devel/git/Makefile.version
cvs rdiff -u -r1.31 -r1.32 pkgsrc/devel/git-base/Makefile
cvs rdiff -u -r1.55 -r1.56 pkgsrc/devel/git-base/distinfo

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.

Modified files:

Index: pkgsrc/devel/git/Makefile.version
diff -u pkgsrc/devel/git/Makefile.version:1.49 pkgsrc/devel/git/Makefile.version:1.50
--- pkgsrc/devel/git/Makefile.version:1.49      Thu Oct  6 10:45:04 2016
+++ pkgsrc/devel/git/Makefile.version   Sun Oct 30 11:43:03 2016
@@ -1,7 +1,7 @@
-# $NetBSD: Makefile.version,v 1.49 2016/10/06 10:45:04 adam Exp $
+# $NetBSD: Makefile.version,v 1.50 2016/10/30 11:43:03 adam Exp $
 #
 # used by devel/git/Makefile.common
 # used by devel/git-cvs/Makefile
 # used by devel/git-svn/Makefile
 
-GIT_VERSION=   2.10.1
+GIT_VERSION=   2.10.2

Index: pkgsrc/devel/git-base/Makefile
diff -u pkgsrc/devel/git-base/Makefile:1.31 pkgsrc/devel/git-base/Makefile:1.32
--- pkgsrc/devel/git-base/Makefile:1.31 Fri Oct  7 18:25:42 2016
+++ pkgsrc/devel/git-base/Makefile      Sun Oct 30 11:43:03 2016
@@ -1,6 +1,5 @@
-# $NetBSD: Makefile,v 1.31 2016/10/07 18:25:42 adam Exp $
+# $NetBSD: Makefile,v 1.32 2016/10/30 11:43:03 adam Exp $
 
-PKGREVISION= 1
 .include "../../devel/git/Makefile.common"
 
 PKGNAME=       git-base-${GIT_VERSION}

Index: pkgsrc/devel/git-base/distinfo
diff -u pkgsrc/devel/git-base/distinfo:1.55 pkgsrc/devel/git-base/distinfo:1.56
--- pkgsrc/devel/git-base/distinfo:1.55 Thu Oct  6 10:45:04 2016
+++ pkgsrc/devel/git-base/distinfo      Sun Oct 30 11:43:03 2016
@@ -1,9 +1,9 @@
-$NetBSD: distinfo,v 1.55 2016/10/06 10:45:04 adam Exp $
+$NetBSD: distinfo,v 1.56 2016/10/30 11:43:03 adam Exp $
 
-SHA1 (git-2.10.1.tar.xz) = 3b7cd84fc3f022306249e276fcd95204c1a2bfe9
-RMD160 (git-2.10.1.tar.xz) = e93d72809c64b9797c35b7cfc455ba3e153cecca
-SHA512 (git-2.10.1.tar.xz) = 976c62b530405388f77b01abb9dd40929831e0fdb83574c5c56ea309af462805659a20685221cf011db67635cebfe550853d1ba3764118bb53df41cf480f216a
-Size (git-2.10.1.tar.xz) = 4102452 bytes
+SHA1 (git-2.10.2.tar.xz) = 2023975ae0061bd569b8529025428e3eca53be2e
+RMD160 (git-2.10.2.tar.xz) = d4330857a79a20c5c9fad98b9bb592fb9cbec1b0
+SHA512 (git-2.10.2.tar.xz) = 0ab09de481dbb31c3304382afaa5d3fc9f861115c9954c65b11a8a1c34b939118c7ed3ff60ac329145888596388e3e4d2b2fb677fe109d33a57206d531b5ee6a
+Size (git-2.10.2.tar.xz) = 4106108 bytes
 SHA1 (patch-aa) = a58f3c2f45c1fbafd751d10b9ef34e6c9afc2c6f
 SHA1 (patch-ac) = 376cdd1c58b143c820ff6395987a8a77cf9b52ba
 SHA1 (patch-ae) = 9bc2e6c7f0a8fbc385b6ffda638d3245a62dc5ca