CVS commit: pkgsrc/doc/guide/files

["Nia Alarie" <nia%netbsd.org@localhost>]

Module Name:    pkgsrc
Committed By:   nia
Date:           Fri Jun 11 15:09:51 UTC 2021

Modified Files:
        pkgsrc/doc/guide/files: fixes.xml gnome.xml

Log Message:
guide: remove references to ancient gnome cruft


To generate a diff of this commit:
cvs rdiff -u -r1.160 -r1.161 pkgsrc/doc/guide/files/fixes.xml
cvs rdiff -u -r1.13 -r1.14 pkgsrc/doc/guide/files/gnome.xml

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.

Modified files:

Index: pkgsrc/doc/guide/files/fixes.xml
diff -u pkgsrc/doc/guide/files/fixes.xml:1.160 pkgsrc/doc/guide/files/fixes.xml:1.161
--- pkgsrc/doc/guide/files/fixes.xml:1.160      Sat Dec 12 21:45:41 2020
+++ pkgsrc/doc/guide/files/fixes.xml    Fri Jun 11 15:09:51 2021
@@ -1,4 +1,4 @@
-<!-- $NetBSD: fixes.xml,v 1.160 2020/12/12 21:45:41 fcambus Exp $ -->
+<!-- $NetBSD: fixes.xml,v 1.161 2021/06/11 15:09:51 nia Exp $ -->
 
 <chapter id="fixes"> <?dbhtml filename="fixes.html"?>
 <title>Making your package work</title>
@@ -1414,9 +1414,9 @@ pre-configure:
   </sect2>
 
   <sect2 id="perl-scripts">
-    <title>Packages containing perl scripts</title>
+    <title>Packages containing Perl scripts</title>
 
-    <para>If your package contains interpreted perl scripts, add
+    <para>If your package contains interpreted Perl scripts, add
     <quote>perl</quote> to the <varname>USE_TOOLS</varname> variable
     and set <varname>REPLACE_PERL</varname> to ensure that the proper
     interpreter path is set. <varname>REPLACE_PERL</varname> should
@@ -1960,7 +1960,7 @@ SPECIAL_PERMS+=         ${PREFIX}/bin/mo
     <title>Packages with hardcoded paths to other interpreters</title>
 
     <para>Your package may also contain scripts with hardcoded paths to
-      other interpreters besides (or as well as) perl.  To correct the
+      other interpreters besides (or as well as) Perl.  To correct the
       full pathname to the script interpreter, you need to set the
       following definitions in your <filename>Makefile</filename> (we
     shall use <command>tclsh</command> in this example):</para>
@@ -1981,7 +1981,7 @@ REPLACE_FILES.tcl=      # list of tcl sc
 
 
   <sect2 id="perl-modules">
-    <title>Packages installing perl modules</title>
+    <title>Packages installing Perl modules</title>
 
     <para>Makefiles of packages providing perl5 modules should include
     the Makefile fragment
@@ -2120,89 +2120,6 @@ PERL5_PACKLIST= auto/Pg/.packlist
 
   </sect2>
 
-  <sect2 id="gconf-data-files">
-    <title>Packages installing GConf data files</title>
-
-    <para>If a package installs <filename>.schemas</filename> or
-    <filename>.entries</filename> files, used by GConf,
-    you need to take some extra steps to make sure they get registered
-    in the database:</para>
-
-    <orderedlist>
-      <listitem>
-       <para>Include <filename>../../devel/GConf/schemas.mk</filename>
-       instead of its <filename>buildlink3.mk</filename> file.  This
-       takes care of rebuilding the GConf database at installation and
-       deinstallation time, and tells the package where to install
-       GConf data files using some standard configure arguments.  It
-       also disallows any access to the database directly from the
-       package.</para>
-      </listitem>
-
-      <listitem>
-       <para>Ensure that the package installs its
-       <filename>.schemas</filename> files under
-       <filename>${PREFIX}/share/gconf/schemas</filename>.  If they get
-       installed under <filename>${PREFIX}/etc</filename>, you will
-       need to manually patch the package.</para>
-      </listitem>
-
-      <listitem>
-       <para>Check the PLIST and remove any entries under the etc/gconf
-       directory, as they will be handled automatically.  See
-       <xref linkend="faq.conf"/> for more information.</para>
-      </listitem>
-
-      <listitem>
-       <para>Define the <varname>GCONF_SCHEMAS</varname> variable in
-       your <filename>Makefile</filename> with a list of all
-       <filename>.schemas</filename> files installed by the package, if
-       any.  Names must not contain any directories in them.</para>
-      </listitem>
-
-      <listitem>
-       <para>Define the <varname>GCONF_ENTRIES</varname> variable in
-       your <filename>Makefile</filename> with a
-       list of all <filename>.entries</filename> files installed by the
-       package, if any. Names must not contain any directories in
-       them.</para>
-      </listitem>
-    </orderedlist>
-  </sect2>
-
-
-  <sect2 id="scrollkeeper-data-files">
-    <title>Packages installing scrollkeeper/rarian data files</title>
-
-    <para>If a package installs <filename>.omf</filename> files, used by
-    scrollkeeper/rarian, you need to take some extra steps to make sure they
-    get registered in the database:</para>
-
-    <orderedlist>
-      <listitem>
-       <para>Include
-       <filename>../../mk/omf-scrollkeeper.mk</filename>
-       instead of rarian's <filename>buildlink3.mk</filename> file.  This
-       takes care of rebuilding the scrollkeeper database at
-       installation and deinstallation time, and disallows any access
-       to it directly from the package.</para>
-      </listitem>
-
-      <listitem>
-       <para>Check the PLIST and remove any entries under the
-       <filename>libdata/scrollkeeper</filename> directory, as they
-       will be handled automatically.</para>
-      </listitem>
-
-      <listitem>
-       <para>Remove the <filename>share/omf</filename> directory from
-       the PLIST.  It will be handled by rarian. (<command>make
-       print-PLIST</command> does this automatically.)</para>
-      </listitem>
-    </orderedlist>
-  </sect2>
-
-
   <sect2 id="x11-fonts">
     <title>Packages installing X11 fonts</title>
 
@@ -2223,47 +2140,6 @@ PERL5_PACKLIST= auto/Pg/.packlist
     manually configure his X server to find them.</para>
   </sect2>
 
-
-  <sect2 id="gtk2-modules">
-    <title>Packages installing GTK2 modules</title>
-
-    <para>If a package installs GTK2 immodules or loaders, you need to
-    take some extra steps to get them registered in the GTK2 database
-    properly:</para>
-
-    <orderedlist>
-      <listitem><para>Include
-      <filename>../../x11/gtk2/modules.mk</filename> instead of its
-      <filename>buildlink3.mk</filename> file.  This takes care of
-      rebuilding the database at installation and deinstallation time.</para>
-      </listitem>
-
-      <listitem><para>Set <varname>GTK2_IMMODULES=YES</varname> if
-      your package installs GTK2 immodules.</para>
-      </listitem>
-
-      <listitem><para>Set <varname>GTK2_LOADERS=YES</varname> if your package installs
-      GTK2 loaders.</para>
-      </listitem>
-
-      <listitem><para>Patch the package to not touch any of the GTK2
-      databases directly.  These are:</para>
-
-       <itemizedlist>
-         <listitem><para><filename>libdata/gtk-2.0/gdk-pixbuf.loaders</filename></para></listitem>
-         <listitem><para><filename>libdata/gtk-2.0/gtk.immodules</filename></para></listitem>
-       </itemizedlist>
-
-      </listitem>
-
-      <listitem><para>Check the <filename>PLIST</filename> and remove
-      any entries under the <filename>libdata/gtk-2.0</filename>
-      directory, as they will be handled automatically.</para>
-      </listitem>
-    </orderedlist>
-  </sect2>
-
-
   <sect2 id="sgml-xml-data">
     <title>Packages installing SGML or XML data</title>
 
@@ -2437,7 +2313,7 @@ PERL5_PACKLIST= auto/Pg/.packlist
   </sect2>
 
   <sect2 id="hicolor-theme">
-    <title>Packages installing hicolor theme icons</title>
+    <title>Packages installing hicolor icons</title>
 
     <para>If a package installs images under the
     <filename>share/icons/hicolor</filename> and/or updates the

Index: pkgsrc/doc/guide/files/gnome.xml
diff -u pkgsrc/doc/guide/files/gnome.xml:1.13 pkgsrc/doc/guide/files/gnome.xml:1.14
--- pkgsrc/doc/guide/files/gnome.xml:1.13       Wed Jun  2 17:03:10 2021
+++ pkgsrc/doc/guide/files/gnome.xml    Fri Jun 11 15:09:51 2021
@@ -1,4 +1,4 @@
-<!-- $NetBSD: gnome.xml,v 1.13 2021/06/02 17:03:10 cirnatdan Exp $ -->
+<!-- $NetBSD: gnome.xml,v 1.14 2021/06/11 15:09:51 nia Exp $ -->
 
 <chapter id="gnome"> <?dbhtml filename="gnome.html"?>
 <title>GNOME packaging and porting</title>
@@ -188,11 +188,6 @@ solution is given.  After applying the s
 
     <tbody>
       <row>
-        <entry>Installs OMF files under <filename>share/omf</filename>.</entry>
-        <entry>See <xref linkend="scrollkeeper-data-files" />.</entry>
-      </row>
-
-      <row>
         <entry>Installs icons under the
         <filename>share/icons/hicolor</filename> hierarchy or updates
         <filename>share/icons/hicolor/icon-theme.cache</filename>.</entry>