CVS commit: pkgsrc/print/py-octoprint

["Pierre Pronchery" <khorben%netbsd.org@localhost>]

Module Name:    pkgsrc
Committed By:   khorben
Date:           Sun Aug 29 20:00:43 UTC 2021

Modified Files:
        pkgsrc/print/py-octoprint: Makefile
        pkgsrc/print/py-octoprint/files: octoprint.sh

Log Message:
py-octoprint: let the RC script work unprivileged

This takes advantage of the introduction of the SYSCONFBASE variable.
Tested on NetBSD/amd64.

Bumps PKGREVISION.


To generate a diff of this commit:
cvs rdiff -u -r1.3 -r1.4 pkgsrc/print/py-octoprint/Makefile
cvs rdiff -u -r1.2 -r1.3 pkgsrc/print/py-octoprint/files/octoprint.sh

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.

Modified files:

Index: pkgsrc/print/py-octoprint/Makefile
diff -u pkgsrc/print/py-octoprint/Makefile:1.3 pkgsrc/print/py-octoprint/Makefile:1.4
--- pkgsrc/print/py-octoprint/Makefile:1.3      Thu Aug  5 13:08:08 2021
+++ pkgsrc/print/py-octoprint/Makefile  Sun Aug 29 20:00:43 2021
@@ -1,7 +1,8 @@
-# $NetBSD: Makefile,v 1.3 2021/08/05 13:08:08 adam Exp $
+# $NetBSD: Makefile,v 1.4 2021/08/29 20:00:43 khorben Exp $
 
 DISTNAME=      ${GITHUB_PROJECT}-${PKGVERSION_NOREV}
 PKGNAME=       ${PYPKGPREFIX}-octoprint-1.6.1
+PKGREVISION=   1
 CATEGORIES=    print
 MASTER_SITES=  ${MASTER_SITE_GITHUB:=OctoPrint/}
 GITHUB_PROJECT=        OctoPrint

Index: pkgsrc/print/py-octoprint/files/octoprint.sh
diff -u pkgsrc/print/py-octoprint/files/octoprint.sh:1.2 pkgsrc/print/py-octoprint/files/octoprint.sh:1.3
--- pkgsrc/print/py-octoprint/files/octoprint.sh:1.2    Sun May 30 21:53:11 2021
+++ pkgsrc/print/py-octoprint/files/octoprint.sh        Sun Aug 29 20:00:43 2021
@@ -1,6 +1,6 @@
 #!@RCD_SCRIPTS_SHELL@
 #
-# $NetBSD: octoprint.sh,v 1.2 2021/05/30 21:53:11 khorben Exp $
+# $NetBSD: octoprint.sh,v 1.3 2021/08/29 20:00:43 khorben Exp $
 #
 # Startup script for OctoPrint
 #
@@ -8,11 +8,11 @@
 # REQUIRE: DAEMON
 # KEYWORD: shutdown
 #
-# You will need to set some variables in /etc/rc.conf to start OctoPrint:
+# You will need to set some variables in @SYSCONFBASE@/rc.conf to start OctoPrint:
 #
 # octoprint=YES
 
-$_rc_subr_loaded . /etc/rc.subr
+$_rc_subr_loaded . @SYSCONFBASE@/rc.subr
 
 name="octoprint"
 rcvar=${name}