comms/bthfp floating point exception

[Juan RP <juan%xtrarom.org@localhost>]

Hi Iain,

I was trying your bthfp application with my BT USB Dongle, it's detected
and configured as:

ubt0 at uhub2 port 2 configuration 1 interface 0
ubt0: SiW SiW, rev 1.10/15.00, addr 2
bthub0 at ubt0 local-bdaddr 00:0a:94:13:22:93
bthidev0 at bthub0 remote-bdaddr 00:0f:de:a7:e7:04
btkbd0 at bthidev0 reportid 1
wskbd1 at btkbd0 mux 1
wskbd1: connecting to wsdisplay0
btms0 at bthidev0 reportid 2: 3 buttons.
wsmouse1 at btms0 mux 0
btsco0 at bthub0 remote-bdaddr 00:0f:de:a7:e7:04 listen mode channel 5
audio1 at btsco0: full duplex
btsco1 at bthub0 remote-bdaddr 00:0f:de:a7:e7:04 channel 4
audio2 at btsco1: full duplex

When I try to use bthfp with my mobile phone (Sony Ericsson K610i)
shows the following:

[juan@nocturno][/usr/pkgsrc/comms/bthfp]> sudo bthfp -v -a xtraeme -d ubt0
Handsfree channel: 4
Press ? for commands
Connecting.. ok
< AT+BRSF=20
> +BRSF:503
Features: 0x01f7
> OK
< AT+CIND=?
> OK
< AT+CIND?
> +CIND: 1,0,0,0,3,0,3,0,0,0
> OK
< AT+CMER=3,0,0,1
> OK
< AT+CLIP=1
> OK
Service Level established
> +CIEV: 5,5
Commands:
a       Answer
c       Connect to phone
h       Hanguup
q       Quit
r       Redial
> +CIEV: 5,3
< AT+BLDN
> OK
> +CIEV: 4,2
> +CIEV: 3,1
zsh: floating point exception  sudo bthfp -v -a xtraeme -d ubt0
[juan@nocturno][/usr/pkgsrc/comms/bthfp]>

Any idea?

Thanks.

-- 

http://plog.xtrarom.org/
Juan RP's blog - NetBSD/pkgsrc news in Spanish