Re: zsh statically compiled

[rhino64%epost.ch@localhost]

Hi,
   Thank you for the info.
best regards

rhino64
On Fri, Jun 05, 2015 at 12:02:29AM +0900, Ryo ONODERA wrote:
> Hi,
> 
> From: rhino64%epost.ch@localhost, Date: Mon, 1 Jun 2015 19:09:19 +0200
> 
> > Hi,
> >    Thank you for your help. Finaly, after looking at the log
> > added to my own e-mail, I noticed that a variable ZSH_STATIC could
> > be set to the value "yes". By using that, I was able to compile statically zsh.
> > 
> > Before this modification of ZSH_STATIC, I have forced the variables for compilation (CFLAGS etc.)
> > to the needed values for producing a static binary.
> 
> I will convert ZSH_STATIC to standard PKG_OPTIONS.
> 
> > This solves my first problem. But I would appreciate if somebody
> > could indicate me where I can find good documentation on
> > the "pkg_create" command. After reading the manual page,
> > I am not able to know what is the syntax of some files 
> > needed for the command (for instance the file BUILD_INFO).
> > 
> > It could be sometimes useful to be able to make quickly a binary package
> > (when for instance only one or two files are needed). It is not always
> > useful to use the whole mechanic of pkgsrc to produce a binary package.
> 
> I have no idea about pkg_create.
> I have never run pkg_create command manually.
> 
> > kind regards,
> > 
> > rhino64
> > 
> > On Mon, Jun 01, 2015 at 04:36:02AM +0900, Ryo ONODERA wrote:
> >> Hi,
> >> 
> >> Could you try to add PKG_DEVELOPER=YES in your mk.conf
> >> (or run 'make PKG_DEVELOPER=YES package')
> >> and send me the result?
> >> 
> >> Thank you.
> >> 
> >> From: rhino64%epost.ch@localhost, Date: Sun, 31 May 2015 19:11:48 +0200
> >> 
> >> > Hi All,
> >> >      I have sent the forwarded message to the list. The mail
> >> > was accepted by the server but it does not seem to appear on the list.
> >> > The reason is perhaps that it was too long since I have added a log
> >> > of the compilation and the message size was about 60k.
> >> > 
> >> > Anyway, after looking at many place, I finally made it to
> >> > work by modifying the PLIST file to remove what I suppose to
> >> > be a list of files used when dynamically compiled.
> >> > 
> >> > The difference between the PLIST modified and the original one
> >> > is the following:
> >> > 
> >> > virtualisation# diff PLIST PLIST.orig 
> >> > 133a134
> >> >> ${PLIST.dynamic}share/zsh/${PKGVERSION}/scripts/newuser
> >> > 
> >> > This seems to solve one of my problem. I would however appreciate
> >> > some hints on how to create a package manually with the command
> >> > "pkg_create".
> >> > 
> >> > Kind regards
> >> > 
> >> > rhino64
> >> > ----- Forwarded message from rhino64%epost.ch@localhost -----
> >> > 
> >> > Date: Sun, 31 May 2015 11:34:02 +0200
> >> > From: rhino64%epost.ch@localhost
> >> > To: pkgsrc-users%netbsd.org@localhost
> >> > Subject: zsh statically compiled
> >> > User-Agent: Mutt/1.5.20 (2009-06-14)
> >> > Message-ID: <20150531093400.GA28055%nordend.local.sourire.ch@localhost>
> >> > 
> >> > Hi All,
> >> >      I have a small problem when I try to compile zsh statically.
> >> > The compilation itself works flawlessly but when a package
> >> > should be made few files seems to be missing (which could
> >> > be normal since no modules exist and all functionalities
> >> > are in the executables). If zsh is compiled dynamically
> >> > the package can be created.
> >> > 
> >> > Unfortunately, I have no idea how to correct the problem. 
> >> > 
> >> > One solution would be to make manually the package by using the command
> >> > "pkg_create". I have done that with the following command: 
> >> > "pkg_create -f /tmp/listezsh5.07.txt -c -"zsh-5.07 statically compiled" \
> >> >             -d /tmp/longDesc.txt /var/tmp/zsh-5.07-static.tgz"
> >> > 
> >> > The command works for creating the package, but when I try to install it
> >> > I get the following error message:
> >> >          virtualisation# pkg_add /var/tmp/zsh-5.07-static.tgz 
> >> >          pkg_add: Not all required build information are present.
> >> >          pkg_add: 1 package addition failed
> >> >          virtualisation# 
> >> > 
> >> > I would greatly appreciate any idea or hint.
> >> > 
> >> > Best regards,
> >> > 
> >> > rhino64
> >> > 
> >> > ----- End forwarded message -----
> >> 
> >> --
> >> Ryo ONODERA // ryo_on%yk.rim.or.jp@localhost
> >> PGP fingerprint = 82A2 DC91 76E0 A10A 8ABB  FD1B F404 27FA C7D1 15F3
> 
> --
> Ryo ONODERA // ryo_on%yk.rim.or.jp@localhost
> PGP fingerprint = 82A2 DC91 76E0 A10A 8ABB  FD1B F404 27FA C7D1 15F3