Re: webkit-gtk fails to build

[Chavdar Ivanov <ci4ic4%gmail.com@localhost>]

It hasn't quite finished yet, but went past the 92% it was bailing out
before. The only difference is the presence of the DISPLAY variable.
Around 43% is the generation of the JavaScript .gir file which I
noticed on one of the builds fails with the message that DISPLAY is
not present, as mentioned earlier. So it appears it is the same
problem, perhaps it has been succeeding for others are they were
running  the build under an X server.

Later.

On Tue, 22 Jan 2019 at 16:40, Chavdar Ivanov <ci4ic4%gmail.com@localhost> wrote:
>
> In the second occasion, the process was killed as there was no more
> swap available. I increased the memory of the VM substantially and
> also configured both of them to use ccache as suggested, placing the
> ccache directory in a md device. Later.
>
> On Tue, 22 Jan 2019 at 16:14, Chavdar Ivanov <ci4ic4%gmail.com@localhost> wrote:
> >
> > No luck. On the first box, with ccache setup, I got the same error as
> > on my other message about the lack of DISPLAY:
> > ....
> > [ 43%] Linking CXX shared library ../../lib/libjavascriptcoregtk-4.0.so
> > [ 44%] Built target JavaScriptCore
> > Scanning dependencies of target JavaScriptCore-4-gir
> > [ 44%] Generating ../../JavaScriptCore-4.0.gir
> >
> > ** (process:14188): CRITICAL **: 15:56:52.864: Failed to get
> > connection to xfconfd: Cannot autolaunch D-Bus without X11 $DISPLAY
> >
> > ** (process:14203): CRITICAL **: 15:56:53.755: Failed to get
> > connection to xfconfd: Cannot autolaunch D-Bus without X11 $DISPLAY
> > [ 44%] Generating ../../JavaScriptCore-4.0.typelib
> >
> > ** (g-ir-compiler:17622): CRITICAL **: 15:56:53.986: Failed to get
> > connection to xfconfd: Cannot autolaunch D-Bus without X11 $DISPLAY
> > gmake[2]: *** [Source/JavaScriptCore/CMakeFiles/JavaScriptCore-4-gir.dir/build.make:61:
> > JavaScriptCore-4.0.typelib] Trace/BPT trap (core dumped)
> > gmake[1]: *** [CMakeFiles/Makefile2:587:
> > Source/JavaScriptCore/CMakeFiles/JavaScriptCore-4-gir.dir/all] Error 2
> > gmake: *** [Makefile:152: all] Error 2
> > *** Error code 2
> >
> > Stop.
> > make[1]: stopped in /usr/pkgsrc/www/webkit-gtk
> > *** Error code 1
> >
> > Stop.
> > make: stopped in /usr/pkgsrc/www/webkit-gtk....
> >
> > So the next try will be with a valid DISPLAY, I guess.
> >
> > On the second machine, where I started from scratch, I got:
> > ----
> > [ 59%] Building CXX object
> > Source/WebCore/CMakeFiles/WebCore.dir/__/__/DerivedSources/WebCore/unified-sources/UnifiedSource20.cpp.o
> > g++: internal compiler error: Killed (program cc1plus received signal 9)
> > Please submit a full bug report,
> > with preprocessed source if appropriate.
> > See <http://www.NetBSD.org/support/send-pr.html> for instructions.
> > gmake[2]: *** [Source/WebCore/CMakeFiles/WebCore.dir/build.make:3786:
> > Source/WebCore/CMakeFiles/WebCore.dir/__/__/DerivedSources/WebCore/unified-sources/UnifiedSource20.cpp.o]
> > Error 4
> > gmake[1]: *** [CMakeFiles/Makefile2:888:
> > Source/WebCore/CMakeFiles/WebCore.dir/all] Error 2
> > gmake: *** [Makefile:152: all] Error 2
> > *** Error code 2
> >
> > Stop.
> > make[1]: stopped in /usr/pkgsrc/www/webkit-gtk
> > *** Error code 1
> >
> > Stop.
> >
> > which is perhaps an exhaused resource - it is just 2CPU 2GB VirtualBox
> > guest. I'll boost it and try again.
> >
> > As I said, I am not particularly bohered by the lack of the package,
> > but by the points one could get to whilst using pkgsrc...
> >
> >
> > On Tue, 22 Jan 2019 at 14:57, Chavdar Ivanov <ci4ic4%gmail.com@localhost> wrote:
> > >
> > > Thanks for the tip! I'll try it, haven't so far. I am actually trying
> > > to build it on a copletely different machine, starting with an empty
> > > /usr/pkg, on -current as well (albeit a bit older, from early
> > > January).
> > >
> > > On Tue, 22 Jan 2019 at 14:53, Greg Troxel <gdt%lexort.com@localhost> wrote:
> > > >
> > > > Chavdar Ivanov <ci4ic4%gmail.com@localhost> writes:
> > > >
> > > > >> This can often be a symptom of building where the path is a symlink.
> > > > >>
> > > > >> make clean, and then
> > > > >>
> > > > >> cd `pwd -P`
> > > > >
> > > > > I had it tried twice before, always cleaning. Also:
> > > > > ...
> > > > > # pwd
> > > > > /usr/pkgsrc/www/webkit-gtk
> > > > > # pwd -P
> > > > > /usr/pkgsrc/www/webkit-gtk
> > > > > ...
> > > > >
> > > > > (pkgsrc is on /).
> > > >
> > > > It sounds like that is not the issue.
> > > >
> > > > > I cleaned PATH and am trying again. There were no suspicious links,
> > > > > except /usr/src and /usr/xsrc, but these should not have been used; I
> > > > > deleted them anyway.
> > > >
> > > > So proabbly something else
> > > >
> > > > > Trouble is, it happens at 92% of the execution, and it takes hours to
> > > > > get there...
> > > >
> > > > ccache!
> > > >
> > > > Seriously, I use ccache for pkgsrc, and it helps a lot, especially for
> > > > debugging.
> > > >
> > > > CCACHE_DIR?=            ${HOME}/.ccache
> > > > PKGSRC_COMPILER=        ccache gcc
> > > >
> > > > (if you are using gcc)
> > > >
> > > > and do 'ccache -M5G' which is a reasonable size.
> > > >
> > > > It's fine for ~/.ccache to be a symlink off someplace.
> > > >
> > > >
> > > > So all in all somebody will have to trace what's happening.
> > >
> > >
> > >
> > > --
> > > ----
> >
> >
> >
> > --
> > ----
>
>
>
> --
> ----



-- 
----