Upgrade VLC

To: "pkgsrc-users%NetBSD.org@localhost" <pkgsrc-users%netbsd.org@localhost>
Subject: Upgrade VLC
From: Todd Gruhn <tgruhn2%gmail.com@localhost>
Date: Tue, 3 Oct 2023 19:19:51 +0000
I stare upgrade everything this way:

   cvs up -Pd -rpkgsrc-2023Q3
     #must be done in /usr/pkgsrc ?

pkgsrc_rolling-replace -uv


cd /usr/pkgsrc/multimedia/vlc
make

Below is my  results.  Ideas? Thanks.

make
=> Bootstrap dependency digest>=20211023: found digest-20220214
=> Checksum BLAKE2s OK for vlc-3.0.18.tar.xz
=> Checksum SHA512 OK for vlc-3.0.18.tar.xz
===> Installing dependencies for vlc-3.0.18nb5
==========================================================================
The supported build options for vlc are:

    alsa avahi dbus debug dts jack pulseaudio
    qt5 vaapi vdpau vlc-skins x11

The currently selected options are:

    dbus qt5 vaapi vdpau x11

You can select which build options to use by setting PKG_DEFAULT_OPTIONS
or the following variable.  Its current value is shown:

    PKG_OPTIONS.vlc (not defined)

==========================================================================
==========================================================================
The following variables will affect the build process of this package,
vlc-3.0.18nb5.  Their current value is shown below:

        * JPEG_DEFAULT = jpeg
        * READLINE_DEFAULT = editline
        * SSLBASE = /usr
        * SSLCERTBUNDLE (not defined)
        * SSLCERTS = /etc/openssl/certs
        * SSLDIR = /etc/openssl
        * SSLKEYS = /etc/openssl/private

Based on these variables, the following variables have been set:

        * JPEGBASE (defined, but empty)
        * JPEG_TYPE = jpeg
        * READLINE_TYPE = editline
        * TERMCAP_TYPE = termcap

You may want to abort the process now with CTRL-C and change the value
of variables in the first group before continuing.  Be sure to run
`/usr/bin/make clean' after the changes.
==========================================================================
=> Tool dependency glib2-tools-[0-9]*: found glib2-tools-2.76.5
=> Tool dependency libtool-base>=2.4.2nb9: found libtool-base-2.4.7nb1
=> Tool dependency mktools-[0-9]*: found mktools-20220614
=> Tool dependency automake>=1.9: found automake-1.16.5nb3
=> Tool dependency autoconf>=2.58: found autoconf-2.71nb2
=> Tool dependency gettext-tools>=0.15: found gettext-tools-0.22
=> Tool dependency bash-[0-9]*: found bash-5.2.15
=> Tool dependency bison>=1.0: found bison-3.8.2nb1
=> Tool dependency gmake>=3.81: found gmake-4.4.1
=> Tool dependency perl>=5.0: found perl-5.38.0
=> Tool dependency pkgconf-[0-9]*: found pkgconf-2.0.2
=> Tool dependency cwrappers>=20150314: found cwrappers-20220403
=> Build dependency x11-links>=1.35: found x11-links-1.35
=> Full dependency dejavu-ttf>=2.26: found dejavu-ttf-2.37
=> Full dependency dbus>=0.91: found dbus-1.14.10
=> Full dependency qt5-qtbase>=5.15.9nb2: NOT found
=> Verifying reinstall for ../../x11/qt5-qtbase
=> Bootstrap dependency digest>=20211023: found digest-20220214
=> Checksum BLAKE2s OK for qtbase-everywhere-opensource-src-5.15.10.tar.xz
=> Checksum SHA512 OK for qtbase-everywhere-opensource-src-5.15.10.tar.xz
===> Installing dependencies for qt5-qtbase-5.15.10
==========================================================================
The supported build options for qt5-qtbase are:

    cups dbus gtk3

The currently selected options are:

    cups dbus

You can select which build options to use by setting PKG_DEFAULT_OPTIONS
or the following variable.  Its current value is shown:

    PKG_OPTIONS.qt5 (not defined)

==========================================================================
==========================================================================
The following variables will affect the build process of this package,
qt5-qtbase-5.15.10.  Their current value is shown below:

        * JPEG_DEFAULT = jpeg
        * KRB5_DEFAULT = heimdal
        * SSLBASE = /usr
        * SSLCERTBUNDLE (not defined)
        * SSLCERTS = /etc/openssl/certs
        * SSLDIR = /etc/openssl
        * SSLKEYS = /etc/openssl/private

Based on these variables, the following variables have been set:

        * JPEGBASE (defined, but empty)
        * JPEG_TYPE = jpeg
        * KRB5BASE (defined, but empty)
        * KRB5_TYPE = heimdal

You may want to abort the process now with CTRL-C and change the value
of variables in the first group before continuing.  Be sure to run
`/usr/bin/make clean' after the changes.
==========================================================================
=> Tool dependency glib2-tools-[0-9]*: found glib2-tools-2.76.5
=> Tool dependency mktools-[0-9]*: found mktools-20220614
=> Tool dependency gmake>=3.81: found gmake-4.4.1
=> Tool dependency perl>=5.0: found perl-5.38.0
=> Tool dependency pkgconf-[0-9]*: found pkgconf-2.0.2
=> Tool dependency cwrappers>=20150314: found cwrappers-20220403
=> Build dependency x11-links>=1.35: found x11-links-1.35
=> Full dependency libcups>=2.4.2nb6: found libcups-2.4.6nb1
=> Full dependency png>=1.6.0nb1: found png-1.6.40
=> Full dependency jpeg>=9: found jpeg-9e
=> Full dependency dbus>=0.91: found dbus-1.14.10
=> Full dependency zstd>=1.3.6: found zstd-1.5.5
=> Full dependency glib2>=2.76.4nb1: found glib2-2.76.5
=> Full dependency pcre2>=10.30: found pcre2-10.42
=> Full dependency harfbuzz>=8.0.1nb1: NOT found
=> Verifying reinstall for ../../fonts/harfbuzz
=> Bootstrap dependency digest>=20211023: found digest-20220214
=> Checksum BLAKE2s OK for harfbuzz-8.1.1.tar.xz
=> Checksum SHA512 OK for harfbuzz-8.1.1.tar.xz
===> Installing dependencies for harfbuzz-8.1.1
==========================================================================
The supported build options for harfbuzz are:

    doc

The currently selected options are:

    doc

You can select which build options to use by setting PKG_DEFAULT_OPTIONS
or the following variable.  Its current value is shown:

    PKG_OPTIONS.harfbuzz (not defined)

==========================================================================
==========================================================================
The following variables will affect the build process of this package,
harfbuzz-8.1.1.  Their current value is shown below:

        * PYTHON_VERSION_DEFAULT = 311

Based on these variables, the following variables have been set:

        * PYPACKAGE = python311

You may want to abort the process now with CTRL-C and change the value
of variables in the first group before continuing.  Be sure to run
`/usr/bin/make clean' after the changes.
==========================================================================
=> Tool dependency glib2-tools-[0-9]*: found glib2-tools-2.76.5
=> Tool dependency meson>=0: found meson-1.0.0
=> Tool dependency python311>=3.11: found python311-3.11.5
=> Tool dependency mktools-[0-9]*: found mktools-20220614
=> Tool dependency pkgconf-[0-9]*: found pkgconf-2.0.2
=> Tool dependency cwrappers>=20150314: found cwrappers-20220403
=> Build dependency gtk-doc>=1.32nb13: NOT found
=> Verifying reinstall for ../../textproc/gtk-doc
=> Bootstrap dependency digest>=20211023: found digest-20220214
===> Checking for vulnerabilities in gtk-doc-1.32nb13
===> Building for gtk-doc-1.32nb13
Making all in buildsystems/autotools
gmake[1]: Entering directory
'/usr/pkgsrc/textproc/gtk-doc/work/gtk-doc-1.32/buildsystems/autotools'
gmake[1]: Nothing to be done for 'all'.
gmake[1]: Leaving directory
'/usr/pkgsrc/textproc/gtk-doc/work/gtk-doc-1.32/buildsystems/autotools'
Making all in buildsystems/cmake
gmake[1]: Entering directory
'/usr/pkgsrc/textproc/gtk-doc/work/gtk-doc-1.32/buildsystems/cmake'
gmake[1]: Nothing to be done for 'all'.
gmake[1]: Leaving directory
'/usr/pkgsrc/textproc/gtk-doc/work/gtk-doc-1.32/buildsystems/cmake'
Making all in help
gmake[1]: Entering directory
'/usr/pkgsrc/textproc/gtk-doc/work/gtk-doc-1.32/help'
Making all in manual
gmake[2]: Entering directory
'/usr/pkgsrc/textproc/gtk-doc/work/gtk-doc-1.32/help/manual'
  GEN    bn_IN/
Traceback (most recent call last):
  File "/usr/pkgsrc/textproc/gtk-doc/work/.tools/bin/itstool", line
27, in <module>
    import libxml2
  File "/usr/pkg/lib/python3.10/site-packages/libxml2.py", line 1, in <module>
    import libxml2mod
ImportError: /usr/pkg/lib/python3.10/site-packages/libxml2mod.so:
Undefined PLT symbol "xmlParseQuotedString" (symnum = 14)
gmake[2]: *** [Makefile:538: bn_IN/bn_IN.stamp] Error 1
gmake[2]: Leaving directory
'/usr/pkgsrc/textproc/gtk-doc/work/gtk-doc-1.32/help/manual'
gmake[1]: *** [Makefile:380: all-recursive] Error 1
gmake[1]: Leaving directory
'/usr/pkgsrc/textproc/gtk-doc/work/gtk-doc-1.32/help'
gmake: *** [Makefile:721: all-recursive] Error 1
*** Error code 2

Stop.
make[4]: stopped in /usr/pkgsrc/textproc/gtk-doc
*** Error code 1

Stop.
make[3]: stopped in /usr/pkgsrc/textproc/gtk-doc
*** Error code 1

Stop.
make[2]: stopped in /usr/pkgsrc/fonts/harfbuzz
*** Error code 1

Stop.
make[1]: stopped in /usr/pkgsrc/x11/qt5-qtbase
*** Error code 1

Stop.
make: stopped in /usr/pkgsrc/multimedia/vlc
gandalf#
Prev by Date: Re: git for wip
Next by Date: Re: gcc12 incompatible with ctfconvert?
Previous by Thread: git for wip
Next by Thread: piping 'progress' command lines to 'sudo sh'
Indexes:
Home | Main Index | Thread Index | Old Index