On Thu, 16 May 2002, Manuel Bouyer wrote:

> > I just made a clean install of 1.5ZC and the installation itself went fine.
> > The first reboot failed (or froze my PC) with the GENERIC kernel after
> > detecting the AGP.

> What chipset does it have ? can you post dmesg ?

cpu0: Intel Pentium II/Celeron (Deschutes) (686-class), 297.80 MHz
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 2-way
cpu0: L2 cache 512 KB 32b/line 4-way
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
total memory = 127 MB
avail memory = 111 MB
using 1657 buffers containing 6628 KB of memory
BIOS32 rev. 0 found at 0xfd7a0
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x02)
agp0 at pchb0[*** IT STOPS HERE***]

The kernel without AGP:

NetBSD 1.5ZC (OMNIBOOK) #0: Thu May 16 10:39:10 CEST 2002
    root@localhost:/usr/src/sys/arch/i386/compile/OMNIBOOK
cpu0: Intel Pentium II/Celeron (Deschutes) (686-class), 297.80 MHz
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 2-way
cpu0: L2 cache 512 KB 32b/line 4-way
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
total memory = 127 MB
avail memory = 111 MB
using 1657 buffers containing 6628 KB of memory
BIOS32 rev. 0 found at 0xfd7a0
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x02)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Neomagic MagicMedia 256AV VGA (rev. 0x20)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Neomagic MagicMedia 256AV Audio (audio multimedia, revision 0x20) at pci1 dev 0 function 1 not configured
Texas Instruments PCI1220 PCI-CardBus Bridge (CardBus bridge, revision 0x02) at pci0 dev 4 function 0 not configured
Texas Instruments PCI1220 PCI-CardBus Bridge (CardBus bridge, revision 0x02) at pci0 dev 4 function 1 not configured
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHN2200AT>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19077 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 39070080 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA CD-ROM XM-1702BC, , 1854> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: can't map i/o space
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.01
audio0 at sb0: half duplex, mmap, independent
midi0 at sb0: SB MIDI UART
opl0 at sb0: model OPL3
midi1 at opl0: SB Yamaha OPL3
wss0 at isa0 port 0x530-0x537 irq 10 drq 0,1: CS4231
audio1 at wss0: full duplex, mmap
pcppi0 at isa0 port 0x61
midi2 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
isapnp0: no ISA Plug 'n Play devices found
biomask ebcd netmask ebcd ttymask fbcf
pcic0: controller 0 detecting irqs with mask 0xdeb8:..3..7..11
pcic0: using irq 3 for socket events
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
ep0 at pcmcia0 function 0 port 0x400-0x40f: 3Com 3c589 10Mbps Ethernet
ep0: address 00:10:5a:2d:3d:03, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT, 10base5, 10base2 (default 10baseT)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
pcmcia0: card irq 7
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

Martti

---
Martti Kuparinen <martti.kuparinen@iki.fi>      NetBSD - No media hype
http://www.iki.fi/kuparine/                     http://www.netbsd.org/