Re: Current hangs at boot

[Tim Rightnour <root%garbled.net@localhost>]

On 14-May-2008 Jochen Kunz wrote:
> Thanks for taking care of the -170.

Well now I'm completly confused.  The 170 booted first try all the way to
single user.  The only oddity I see is that it didn't print the CPU speed.

     memory      keyboard     network      scsi      speaker       ok
0 > boot net 
BOOTP S = 1 
FILE: ofwboot.elf
Load Addr=0x4000 Max Size=0xbfc000 
FINAL Packet Count = 109 
FINAL File Size = 55604 bytes.

>> NetBSD/ofppc OpenFirmware Boot, Revision 1.10
>> (root%polaris.garbled.net@localhost, Sun May 11 01:06:16 MST 2008)
Using IP address: 192.168.1.108
root addr=192.168.1.1 path=/usr/nfsroot/NetBSD/ofppc
4072032+354120 [230448+224022]=0x4a7cbc
 start=0x100000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.62 (GENERIC) #234: Thu May 15 11:14:44 MST 2008
        
root%polaris.garbled.net@localhost:/obj/ofppc/sys/arch/ofppc/compile/GENERIC
Model: IBM,7044-170
total memory = 1024 MB
avail memory = 976 MB
bootpath: /pci@fef00000/ethernet@10/netbsd.ofppc64
mainbus0 (root)
rtas0 at mainbus0: version 1, entry @pa 0x6ae6f8
cpu0 at mainbus0: POWER3II (Revision 1.4), ID 0 (primary)
cpu0: HID0 f001d1a0<EMCP,DBP,EBA,EBD,NHR,ICE,DCE,DLOCK,IFEM,SGE,BTIC>,
powersave: -1
cpu0: L1 I-cache 32 KB 128B/line, D-cache 64 KB 128B/line
cpu0: L2 cache 1 MB 128B/line
ofwpci0 at mainbus0
OpenPIC Version 1.2: Supports 8 CPUs and 32 interrupt sources.
pci0 at ofwpci0 bus 0: OFW method configuration space access
pchb0 at pci0 dev 0 function 0
pchb0: IBM Python PCI-PCI Bridge (rev. 0x0a)
pcib0 at pci0 dev 11 function 0: Symphony Labs 83C553 PCI-ISA Bridge (rev. 0x10)
pciide0 at pci0 dev 11 function 1
pciide0: Symphony Labs 82C105 (rev. 0x05)
pciide0: couldn't map native-PCI interrupt
pciide0: couldn't map native-PCI interrupt
esiop0 at pci0 dev 12 function 0: Symbios Logic 53c896 (ultra2-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at irq 20
scsibus0 at esiop0: 16 targets, 8 luns per target
esiop1 at pci0 dev 12 function 1: Symbios Logic 53c896 (ultra2-wide scsi)
esiop1: using on-board RAM
esiop1: interrupting at irq 17
scsibus1 at esiop1: 16 targets, 8 luns per target
pcn0 at pci0 dev 16 function 0: AMD PCnet-PCI Ethernet
pcn0: Am79c971 PCnet-FAST rev 6, Ethernet address 00:06:29:84:1b:a6
pcn0: interrupting at irq 18
nsphy0 at pcn0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy0 at pcn0 phy 31: Generic IEEE 802.3u media interface
ukphy0: Am79C972 internal 10BASE-T interface (OUI 0x000058, model 0x0001), rev.
1
ukphy0: 10baseT, 10baseT-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
attimer0: attached to pcppi0
ofwpci1 at mainbus0
pci_configure_bus() failed
pci1 at ofwpci1 bus 64
pchb1 at pci1 dev 0 function 0
pchb1: IBM Python PCI-PCI Bridge (rev. 0x0a)
biomask 800001c netmask 800001c ttymask 800001c
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
cd0 at scsibus0 target 1 lun 0: <IBM, CDRM00203\000\000\000\000\000!K, 1_03>
cdrom removable
cd0: sync (100.00ns offset 15), 8-bit (10.000MB/s) transfers
sd0 at scsibus0 target 4 lun 0: <IBM, DNES-309170W, SAGU> disk fixed
sd0: 8678 MB, 11474 cyl, 5 head, 309 sec, 512 bytes/sect x 17774160 sectors
sd0: sync (50.00ns offset 31), 16-bit (40.000MB/s) transfers, tagged queueing
Kernelized RAIDframe activated
boot device: pcn0
root on pcn0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 192.168.1.1
nfs_boot: my_addr=192.168.1.108
nfs_boot: my_mask=255.255.255.0
root on 192.168.1.1:/usr/nfsroot/NetBSD/ofppc
root file system type: nfs
/etc/rc.conf is not configured.  Multiuser boot aborted.
Enter pathname of shell or RETURN for /bin/sh: 
telnet> q

---
Tim Rightnour <root%garbled.net@localhost>
NetBSD: Free multi-architecture OS http://www.netbsd.org/
Genecys: Open Source 3D MMORPG: http://www.genecys.org/