Re: PegasosII + VGA

[KIYOHARA Takashi <kiyohara%kk.iij4u.or.jp@localhost>]

I apologize...

From: KIYOHARA Takashi <kiyohara%kk.iij4u.or.jp@localhost>
Date: Fri, 02 Oct 2009 15:13:35 +0900 (JST)

> I can boot single user mode with serial console.  Also multi user mode.
> But I think very buggy it.
> # I attach dmesg.boot to this mail.

Thanks,
--
kiyohara

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.17 (JUDGEMENT) #0: Tue Sep 15 06:15:27 JST 2009
        lance%magician.fool@localhost:/usr/src/sys/arch/ofppc/compile/JUDGEMENT
Model: Pegasos2
total memory = 1024 MB
avail memory = 981 MB
timecounter: Timecounters tick every 10.000 msec
bootpath: /pci@80000000/ethernet@D/netbsd
mainbus0 (root)
rtas0 at mainbus0: version 1, entry @pa 0x57a000
cpu0 at mainbus0: 7457 (Revision 1.1), ID 0 (primary)
cpu0: HID0 
0x84d0c1bc<EMCP,TBEN,HIGH_BAT_EN,NAP,DPM,ICE,DCE,XBSEN,SGE,BTIC,LRSTK,FOLD,BHT>,
 powersave: 1
cpu0: 1000.00 MHz, 512KB L2 cache parity enabled
cpu0: L1 I-cache 32 KB 32B/line, D-cache 32 KB 32B/line
cpu0: L2 cache 256 KB 64B/line
cpu0: L3 cache 1 MB 128B/line
pegasospci0 at mainbus0
Switching to COM console at speed 115200
pci0 at pegasospci0 bus 0: indirect configuration space access
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Marvell MV6436x System Controller (rev. 0x03)
fwohci0 at pci0 dev 1 function 0: VIA Technologies VT6306 IEEE 1394 Host 
Controller (rev. 0x46)
fwohci0: interrupting at irq 9
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:11:06:00:00:00:4b:2f
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
bktr0 at pci0 dev 7 function 0
bktr0: interrupting at irq 9
bktr0: Card has no configuration EEPROM. Cannot determine card make.
bktr0: IMS TV Turbo, Philips FR1236 NTSC FM tuner.
radio0 at bktr0
Brooktree Bt878 Video Capture (Audio Section) (miscellaneous multimedia, 
revision 0x11) at pci0 dev 7 function 1 not configured
pcib0 at pci0 dev 12 function 0: VIA Technologies VT8231 PCI-ISA Bridge (rev. 
0x10)
pcib0: PIRQ[0-3] not used
viaide0 at pci0 dev 12 function 1
viaide0: VIA Technologies VT8231 ATA100 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to native-PCI mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to native-PCI mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
uhci0 at pci0 dev 12 function 2: VIA Technologies VT83C572 USB Controller (rev. 
0x1e)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 12 function 3: VIA Technologies VT83C572 USB Controller (rev. 
0x1e)
uhci1: interrupting at irq 9
usb1 at uhci1: USB revision 1.0
VIA Technologies VT8231 Power Management Controller (miscellaneous bridge, 
revision 0x10) at pci0 dev 12 function 4 not configured
auvia0 at pci0 dev 12 function 5: VIA Technologies VT82C686A AC'97 Audio (rev 
0x40)
auvia0: interrupting at irq 9
auvia0: ac97: SigmaTel STAC9766/67 codec; headphone, 20 bit DAC, 18 bit ADC, 
SigmaTel 3D
auvia0: ac97: ext id 0x605<AC97_22,AMAP,SPDIF,VRA>
audio0 at auvia0: full duplex, mmap, independent
VIA Technologies VT82C686A MC-97 Modem Controller (miscellaneous 
communications, revision 0x20) at pci0 dev 12 function 6 not configured
vr0 at pci0 dev 13 function 0: VIA Technologies VT6102 (Rhine II) 10/100 
Ethernet (rev. 0x51)
vr0: interrupting at irq 9
vr0: Ethernet address: 00:0b:2f:4e:a4:d6
rlphy0 at vr0 phy 16: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
com1: console
pckbc0 at isa0 port 0x60-0x64
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
attimer0: attached to pcppi0
pegasospci1 at mainbus0
pci1 at pegasospci1 bus 0: indirect configuration space access
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 0 function 0
pchb1: Marvell MV6436x System Controller (rev. 0x03)
genfb0 at pci1 dev 8 function 0: Silicon Integrated System 300/305 AGP VGA
no address property
biomask 800001e netmask 800001e ttymask 800001e
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mftb" frequency 33333333 Hz quality 100
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc1, gen=1, CYCLEMASTER mode
ieee1394if0: 2 nodes, maxhop <= 1 cable IRM irm(1)  (me) ieee1394if0: bus 
manager 1
uhub0 at usb0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ieee1394if0: New S400 device ID:0030e001e0911099
sbp0 at ieee1394if0: SBP-2/SCSI over IEEE1394
scsibus0 at sbp0: 1 target, 0 luns per target
sbp0: ordered:1 type:14 EUI:0030e001e0911099 node:0 speed:2 maxrec:8
sbp0: sbp0:0:0 'Oxford Semiconductor Ltd.      ' 'OXFORD IDE Device 1' '000037'
sd0 at scsibus0 target 0 lun 0: <Oxford S, OXFORD IDE Devic, 00> simplified 
direct fixed
sd0: 30800 MB, 30800 cyl, 64 head, 32 sec, 512 bytes/sect x 63078400 sectors
wd0 at atabus0 drive 0: <QUANTUM FIREBALL CR4.3A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 4110 MB, 14848 cyl, 9 head, 63 sec, 512 bytes/sect x 8418816 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
boot device: vr0
root on sd0a dumps on sd0b
mountroot: trying nfs...
mountroot: trying msdos...
mountroot: trying ffs...
root file system type: ffs
init: copying out flags `-s' 3
init: copying out path `/sbin/init' 11