Update, I tried booting with option 5 and the CD inside, it gave this then
went to the Install Sequence. So with no CD inside, it gives the error in my
previous email. With CD inside it displays the below information and then
starts the installer.
Further help/instructions will be greatly appreciated.
/pci@fef00000/scsi@c/sd@a,0
NetBSD/ofppc OpenFirmware Boot, Revision 1.10
(builds%b6.netbsd.org@localhost, Sat Nov 6 17:13:39 UTC 2010)
open /netbsd.ofppc64: No such file or directory
open /netbsd64: No such file or directory
open /netbsd64.gz: No such file or directory
open onetbsd64: No such file or directory
open /netbsd.ofppc: No such file or directory
9327228+354596 [234944+227564]=0x9ace18
start=0x100000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.1 (INSTALL) #0: Sat Nov 6 17:27:24 UTC 2010
builds%b6.netbsd.org@localhost:/home/builds/ab/netbsd-5-1-
RELEASE/ofppc/201011061943Z-obj/homL
Model: IBM,7028-6E1
total memory = 512 MB
avail memory = 476 MB
bootpath: /pci@fef00000/ide@b,1/disk@0/netbsd
mainbus0 (root)
rtas0 at mainbus0: version 1, entry @pa 0xab36f8
cpu0 at mainbus0: POWER3II (Revision 1.4), ID 0 (primary)
cpu0: HID0 f001d1a0<EMCP,DBP,EBA,EBD,NHR,ICE,DCE,DLOCK,IFEM,SGE,BTIC>,
powersave: -1
cpu0: L1 I-cache 32 KB 128B/line, D-cache 64 KB 128B/line
cpu0: L2 cache 4 MB 128B/line
ofwpci0 at mainbus0
OpenPIC Version 1.2: Supports 8 CPUs and 32 interrupt sources.
PCI bus 0: Warning: Total bandwidth exceeded!?
pci0 at ofwpci0 bus 0: OFW method configuration space access
pchb0 at pci0 dev 0 function 0
pchb0: IBM Python PCI-PCI Bridge (rev. 0x0a)
pcib0 at pci0 dev 11 function 0: Symphony Labs 83C553 PCI-ISA Bridge (rev.
0x10)
pciide0 at pci0 dev 11 function 1
pciide0: Symphony Labs 82C105 (rev. 0x05)
pciide0: using irq 16 for native-PCI interrupt
atabus0 at pciide0 channel 0
atabus1 at pciide0 channel 1
esiop0 at pci0 dev 12 function 0: Symbios Logic 53c1010-66 (ultra3-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at irq 20
scsibus0 at esiop0: 16 targets, 8 luns per target
esiop1 at pci0 dev 12 function 1: Symbios Logic 53c1010-66 (ultra3-wide scsi)
esiop1: using on-board RAM
esiop1: interrupting at irq 17
scsibus1 at esiop1: 16 targets, 8 luns per target
pcn0 at pci0 dev 16 function 0: AMD PCnet-PCI Ethernet
pcn0: Am79c971 PCnet-FAST rev 6, Ethernet address 00:02:55:76:cb:a0
pcn0: interrupting at irq 18
lxtphy0 at pcn0 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy0 at pcn0 phy 31: Generic IEEE 802.3u media interface
ukphy0: Am79C972 internal 10BASE-T interface (OUI 0x000058, model 0x0001),
rev. 1
ukphy0: 10baseT, 10baseT-FDX, auto
pcn1 at pci0 dev 17 function 0: AMD PCnet-PCI Ethernet
pcn1: Am79c971 PCnet-FAST rev 6, Ethernet address 00:02:55:b6:c9:3e
pcn1: interrupting at irq 23
lxtphy1 at pcn1 phy 1: LXT970 10/100 media interface, rev. 3
--
Lyubomir Grigorov (bgalakazam)
Attachment:
signature.asc
Description: This is a digitally signed message part.