Re: Allwinner D1

[Rui-Xiang Guo <rxg%lavabit.com@localhost>]

> Sorry, I meant to say this one
> 
> https://nycdn.netbsd.org/pub/NetBSD-daily/HEAD/202408132120Z/riscv-riscv64/binary/gzimg/riscv64.img.gz

Looks fine, thanks for merging into GENERIC64.
BTW, I created wip/u-boot-mangopi-mq-pro-toc1 package to make it easier for
testing on other D1 boards. Just to modify toc1.cfg and UBOOT_CONFIG in the
Makefile.

[   1.0000000] NetBSD 10.99.11 (GENERIC64) #0: Tue Aug 13 20:52:52 UTC 2024
[   1.0000000]  mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/riscv/compile/GENERIC64
[   1.0000000] total memory = 1013 MB
[   1.0000000] avail memory = 980 MB
[   1.0000000] mainbus0 (root)
[   1.0000000] simplebus0 at mainbus0: MangoPi MQ Pro
[   1.0000000] simplebus1 at simplebus0
[   1.0000000] cpus0 at simplebus0
[   1.0000000] simplebus2 at simplebus0
[   1.0000000] cpu0 at cpus0: T-Head 9-Series Processor (C9, E9 series) imp. 0
[   1.0000000] fclock0 at simplebus0: 24000000 Hz fixed clock (dcxo)
[   1.0000000] intc0 at cpu0: local interrupt controller
[   1.0000000] plic0 at simplebus1: RISC-V PLIC (175 IRQs)
[   1.0000000] sun20id1ccu0 at simplebus1: D1 CCU
[   1.0000000] sunxigpio0 at simplebus1: PIO
[   1.0000000] gpio0 at sunxigpio0: 88 pins
[   1.0000000] sunxigpio0: interrupting on plic0 irq 85
[   1.0000000] fregulator0 at simplebus0: vcc-3v3
[   1.0000000] fregulator1 at simplebus0: avdd2v8
[   1.0000000] sun6idma0 at simplebus1: DMA controller (16 channels)
[   1.0000000] sun6idma0: interrupting on plic0 irq 66
[   1.0000000] fregulator2 at simplebus0: vcc
[   1.0000000] fregulator3 at simplebus0: vdd-cpu
[   1.0000000] sunxisid0 at simplebus1: Security ID EFUSE
[   1.0000000] fregulator4 at simplebus0: dvdd
[   1.0000000] /soc/mixer@5100000 at simplebus1 not configured
[   1.0000000] /soc/mixer@5200000 at simplebus1 not configured
[   1.0000000] /soc/rtc@7090000 at simplebus1 not configured
[   1.0000000] /wifi-pwrseq at simplebus0 not configured
[   1.0000000] sunxiusbphy0 at simplebus1: USB PHY
[   1.0000000] /soc/syscon@3000000 at simplebus1 not configured
[   1.0000000] /soc/clock-controller@5000000 at simplebus1 not configured
[   1.0000000] /soc/tcon-top@5460000 at simplebus1 not configured
[   1.0000000] /soc/phy@5451000 at simplebus1 not configured
[   1.0000000] /soc/lcd-controller@5461000 at simplebus1 not configured
[   1.0000000] /soc/lcd-controller@5470000 at simplebus1 not configured
[   1.0000000] /soc/clock-controller@7010000 at simplebus1 not configured
[   1.0000000] /opp-table-cpu at simplebus0 not configured
[   1.0000000] /soc/timer@2050000 at simplebus1 not configured
[   1.0000000] com0 at simplebus1: DesignWare APB UART, no fifo
[   1.0000000] com0: console
[   1.0000000] com0: interrupting on plic0 irq 18
[   1.0000000] com1 at simplebus1: DesignWare APB UART, no fifo
[   1.0000000] com1: interrupting on plic0 irq 19
[   1.0000000] /soc/crypto@3040000 at simplebus1 not configured
[   1.0000000] /soc/dram-controller@3102000 at simplebus1 not configured
[   1.0000000] /soc/mmc@4020000 at simplebus1 not configured
[   1.0000000] /soc/mmc@4021000 at simplebus1 not configured
[   1.0000000] /soc/usb@4100000 at simplebus1 not configured
[   1.0000000] /soc/usb@4200000 at simplebus1 not configured
[   1.0000000] /soc/usb@4200400 at simplebus1 not configured
[   1.0000000] /soc/power-controller@7001000 at simplebus1 not configured
[   1.0000000] /soc/watchdog@6011000 at simplebus1 not configured
[   1.0000000] /pmu at simplebus0 not configured
[   1.0000000] /leds at simplebus0 not configured
[   1.0000030] cpu_boot_secondary_processors: starting secondary processors
[   1.0000030] cpu_boot_secondary_processors: secondary processors hatched. 1 running
[   1.0000030] WARNING: system needs entropy for security; see entropy(7)
[   1.0000030] swwdog0: software watchdog initialized
[   1.0000030] boot device: <unknown>
[   1.0000030] root device:

-rxg