Hi,

seems to find all the devices, but same timeout-y problem with
siop0.

boot log below.


Sun (TM) Enterprise 250 (2 X UltraSPARC-II 400MHz), No Keyboard
OpenBoot 3.16, 1024 MB memory installed, Serial #15128240.
Ethernet address 8:0:20:e6:d6:b0, Host ID: 80e6d6b0.



Rebooting with command: boot disk0:g
Boot device: /pci@1f,4000/scsi@3/disk@0,0:g  File and args:
NetBSD IEEE 1275 Bootblock
..>> NetBSD/sparc64 OpenFirmware Boot, Revision 1.3
>> (eeh@nonplus.netbsd.org, Sat Jan 13 09:08:17 PST 2001)
devopen: getdisklabel sez no disk label
devopen: search_label sez no disk label
loadfile: reading header
elf64_exec: Booting /pci@1f,4000/scsi@3/disk@0,0:g/netbsd
4338280@0x1000000+538400@0x1423268
symbols @ 0xfefa0300 74+254256+131256 start=0x1000000
chain: calling OF_chain(800000, ed60, 1000000, fff89a80, 18)
[ using 386360 bytes of netbsd ELF symbol table ]
prom_get_msgbuf: Cannot recover msgbuf on E250
prom_get_msgbuf: allocated new buf at 00000000
prom_get_msgbuf: claiming new buf at 00000000
Setting DTLB entry 00000000 01000000 data e0000000 3f400076
Setting DTLB entry 00000000 01400000 data e0000000 3f800076
Setting ITLB entry 00000000 01000000 data e0000000 3f800076
Setting TSB pointer 00000000 014b8000
consinit()
setting up stdin
stdin instance = fff69760
setting up stdout
stdout instance = fff69d00
stdout package = f006eca8
console is unknown
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5S (GENERIC) #63: Fri Mar  2 03:53:17 EST 2001
    mrg@everglades.eterna.com.au:/orb/j/src/sys/arch/sparc64/compile/GENERIC
total memory = 1024 MB
avail memory = 941 MB
using 6566 buffers containing 52528 KB of memory
bootpath: /pci@1f,4000/scsi@3,0/disk@0,0:g
mainbus0 (root): SUNW,Ultra-250
cpu0 at mainbus0: SUNW,UltraSPARC-II @ 400 MHz, version 0 FPU
cpu0: physical 4K instruction (32 b/l), 4K data (32 b/l), 2048K external (64 b/l)
psycho0 at mainbus0 addr 0xfffbc000
psycho: impl 0, version 4: ign 7c0 bus range 0 to 0; PCI bus 0
DVMA map: fe002000 to ffffe000
pci0 at psycho0
pci0: i/o space, memory space enabled
ebus0 at pci0 dev 1 function 0
ebus0: Sun Microsystems PCIO Ebus2, revision 0x01
auxio0 at ebus0 addr 726000-726003 addr 728000-728003 addr 72a000-72a003 addr 72c000-72c003 addr 72f0
00-72f003
power at ebus0 addr 724000-724003 not configured
SUNW,pll at ebus0 addr 504000-504002 not configured
sc at ebus0 addr 500000-500007 not configured
se at ebus0 addr 400000-40007f ipl 43 not configured
se at ebus0 addr 200000-20007f ipl 35 not configured
com0 at ebus0 addr 3083f8-3083ff ipl 41: ns16550a, working fifo
kbd0 at com0
com1 at ebus0 addr 3062f8-3062ff ipl 42: ns16550a, working fifo
ms0 at com1
lpt0 at ebus0 addr 3043bc-3043cb addr 300398-300399 addr 700000-70000f ipl 34
clock0 at ebus0 addr 0-1fff: mk48t59: hostid 80e6d6b0
flashprom at ebus0 addr 0-fffff addr 0-fffff not configured
SUNW,envctrltwo at ebus0 addr 600000-600003 ipl 40 ipl 37 not configured
hme0 at pci0 dev 1 function 1: address 08:00:20:e6:d6:b0
nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: using ipl 33 for interrupt
siop0 at pci0 dev 3 function 0: Symbios Logic 53c875 (ultra-wide scsi)
siop0: using on-board RAM
siop0: interrupting at ipl 32
scsibus0 at siop0: 16 targets, 8 luns per target
siop1 at pci0 dev 3 function 1: Symbios Logic 53c875 (ultra-wide scsi)
siop1: using on-board RAM
siop1: interrupting at ipl 38
scsibus1 at siop1: 16 targets, 8 luns per target
psycho1 at mainbus0 addr 0xfffce000
psycho: impl 0, version 4: ign 7c0 bus range 128 to 128; PCI bus 128
pci1 at psycho1
pci1: i/o space, memory space enabled
3D Labs GLINT Permedia 2V (miscellaneous display, revision 0x01) at pci1 dev 1 function 0 not configu
red
timer0 at mainbus0 addr 0xfffa7c00 irq vectors 7ec and 7ed
pcons0 at mainbus0
scsibus0: waiting 2 seconds for devices to settle...
siop0: alloc newcdb at PHY addr 0xfe01c000
siop0: target 0 using tagged queuing
sd0 at scsibus0 target 0 lun 0: <FUJITSU, MAJ3182M SUN18G, 0804> SCSI2 0/direct fixed
siop0: target 0 using 16bit transfers
siop0: target 0 now synchronous at 20.0Mhz, offset 16
sd0: 17274 MB, 7508 cyl, 19 head, 248 sec, 512 bytes/sect x 35378533 sectors
cd0 at scsibus0 target 6 lun 0: <TOSHIBA, DVD-ROM SD-M1401, 1007> SCSI2 5/cdrom removable
siop0: target 6 now synchronous at 20.0Mhz, offset 16
siop0: target 8 using tagged queuing
sd1 at scsibus0 target 8 lun 0: <FUJITSU, MAJ3364MC, 0114> SCSI4 0/direct fixed
siop0: target 8 using 16bit transfers
siop0: target 8 now synchronous at 20.0Mhz, offset 16
sd1: 34858 MB, 14793 cyl, 10 head, 482 sec, 512 bytes/sect x 71390320 sectors
siop0: target 9 using tagged queuing
sd2 at scsibus0 target 9 lun 0: <FUJITSU, MAJ3364MC, 0114> SCSI4 0/direct fixed
siop0: target 9 using 16bit transfers
siop0: target 9 now synchronous at 20.0Mhz, offset 16
sd2: 34858 MB, 14793 cyl, 10 head, 482 sec, 512 bytes/sect x 71390320 sectors
siop0: target 10 using tagged queuing
sd3 at scsibus0 target 10 lun 0: <FUJITSU, MAJ3364MC, 0114> SCSI4 0/direct fixed
siop0: target 10 using 16bit transfers
siop0: target 10 now synchronous at 20.0Mhz, offset 16
sd3: 34858 MB, 14793 cyl, 10 head, 482 sec, 512 bytes/sect x 71390320 sectors
scsibus1: waiting 2 seconds for devices to settle...
siop1: alloc newcdb at PHY addr 0xfe01e000
raidattach: Asked for 4 units
Kernelized RAIDframe activated
root device: ?
use one of: raid0[a-h] raid1[a-h] raid2[a-h] raid3[a-h] hme0 sd0[a-h] cd0[a-h] sd1[a-h] sd2[a-h] sd3[
a-h] halt
root device: sd0g
dump device (default sd0b):
file system (default generic):
root on sd0g dumps on sd0b
sd0(siop0:0:0): command timeout
sd0(siop0:0:0): command timeout
siop0: scsi bus reset
cmd 0x2741888 (target 0:0) in reset list
cmd 0x2741888 (status 2) about to be processed
siop0: target 0 using 16bit transfers
siop0: target 0 now synchronous at 20.0Mhz, offset 16
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying lfs...
mountroot: trying nfs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11



> 
> 
> hi folks.
> 
> 
> here's a new kernel that hopefully should fix the interrupt mapping
> problems for the E250 (and more).  please let me know how it goes.
> 
> 
>     ftp.netbsd.org:/pub/NetBSD/arch/sparc64/kernels/NetBSD-1.5S-3
> 
> 
> thanks,
> 
> .mrg.