Hello!

I bootstrapped my Ultra-1 last night with NetBSD 1.5 using Solaris.
I am very happy that is much more responsive than Solaris 2.8 <gag>.

I'm working on applying ALTQ patches to my kernel to do bandwidth QoS.
While rebuilding the GENERIC kernel (without patches, yet), I get a 

floyd: {67} make
cc -g -O2 -Wimplicit -Wunused -Wswitch -Wcomment -Wtrigraphs
-Wchar-subscripts -Wparentheses -Wstrict-prototypes -Wmissing-prototypes
-Wpointer-arith -Wa,-Av9a -mno-fpu -I. -I../../../../arch
-I../../../.. -nostdinc -DSUN4U -DTRAPWIN -D__ELF__ -DLKM -DDEBUG -D_LP64
-DMAXUSERS=32 -D_KERNEL   -c ../../../../kern/vfs_syscalls.c
/var/tmp/ccEYd6hn.s: Assembler messages:
/var/tmp/ccEYd6hn.s:322: Fatal error: Can't extend frag 98. chars
*** Error code 1

Trolling the list, I find that installing a new toolchain will fix this
problem. I looked at the ftp site, and there are a couple toolchains
available now.

Which one do I get? Would a later snapshot be better, -current, or?

thanx
natez


consinit()
setting up stdin
stdin instance = fffe60f0
setting up stdout
stdout instance = fffe64b8
stdout package = f005a538
console is unknown
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5 (GENERIC) #14: Wed Nov 22 10:44:31 PST 2000
    eeh@nonplus.one-o.com:/home5/src/src/sys/arch/sparc64/compile/GENERIC
total memory = 128 MB
avail memory = 109 MB
using 832 buffers containing 6656 KB of memory
bootpath: /sbus@1f,0/espdma@e,8400000/esp@e,8800000/sd@1,0
mainbus0 (root): SUNW,Ultra-1
cpu0 at mainbus0: SUNW,UltraSPARC @ 166.993 MHz, version 0 FPU
cpu0: physical 4K instruction (32 b/l), 4K data (32 b/l), 2048K external (64 b/l) 
timer0 at mainbus0 addr 0xfffc7c00 irq vectors 7f0 and 7f1
sbus0 at mainbus0 addr 0xfffcc000: clock = 25 MHz
DVMA map: ff802000 to ffffe000
audiocs0 at sbus0 slot 13 offset 0xc000000 vector 24 ipl 13: CS4231A
audio0 at audiocs0: full duplex
auxio0 at sbus0 slot 15 offset 0x1900000
flashprom at sbus0 slot 15 offset 0x0 not configured
SUNW,fdtwo at sbus0 slot 15 offset 0x1400000 vector 29 ipl 11 not configured
clock0 at sbus0 slot 15 offset 0x1200000: mk48t59 (eeprom) hostid ffffffff8080dabc
zs0 at sbus0 slot 15 offset 0x1100000 vector 28 ipl 12 softpri 6
zstty0 at zs0 channel 0 (console i/o)
zstty1 at zs0 channel 1
zs1 at sbus0 slot 15 offset 0x1000000 vector 28 ipl 12 softpri 6
kbd0 at zs1 channel 0
ms0 at zs1 channel 1
intr_establish: intr reused 2024
sc at sbus0 slot 15 offset 0x1300000 not configured
SUNW,pll at sbus0 slot 15 offset 0x1304000 not configured
dma0 at sbus0 slot 14 offset 0x8400000: rev 2
esp0 at dma0 slot 14 offset 0x8800000 vector 20 ipl 3: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
ledma0 at sbus0 slot 14 offset 0x8400010: rev 2
le0 at ledma0 slot 14 offset 0x8c00000 vector 21 ipl 6: address 08:00:20:80:da:bc
le0: 8 receive buffers, 2 transmit buffers
bpp0 at sbus0 slot 14 offset 0xc800000 vector 22 ipl 2: rev 2
hme1 at sbus0 slot 1 offset 0x8c00000 vector 4 ipl 6: address 08:00:20:80:da:bc
nsphy0 at hme1 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
SUNW,fas at sbus0 slot 1 offset 0x8800000 vector 3 ipl 3 not configured
cgsix0 at sbus0 slot 2 offset 0x0 vector 5 ipl 5: SUNW,501-2325, 1152 x 900, rev 11
pcons at mainbus0 not configured
scsibus0: waiting 2 seconds for devices to settle...
probe(esp0:0:0): max sync rate 10.00MB/s
sd0 at scsibus0 target 0 lun 0: <IBM, DCAS32160SUN2.1G, S65A> SCSI2 0/direct fixed
sd0: 2063 MB, 8188 cyl, 3 head, 172 sec, 512 bytes/sect x 4226725 sectors
probe(esp0:1:0): max sync rate 10.00MB/s
sd1 at scsibus0 target 1 lun 0: <IBM, DCAS32160SUN2.1G, S65A> SCSI2 0/direct fixed
sd1: 2063 MB, 8188 cyl, 3 head, 172 sec, 512 bytes/sect x 4226725 sectors
probe(esp0:6:0): max sync rate 10.00MB/s
cd0 at scsibus0 target 6 lun 0: <TOSHIBA, XM5701TASUN12XCD, 0997> SCSI2 5/cdrom removable
raidattach: Asked for 4 units
Kernelized RAIDframe activated
root on sd1a dumps on sd1b
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying lfs...
mountroot: trying nfs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
IP Filter: v3.4.9 initialized.  Default = pass all, Logging = enabled