I tried 1.5.2 installation by using a diskless setup on Ultra5.
However, when the box tries to boot up, it stops with the message,
"init: copying out path '/sbin/init' 11", like below.

---
ok boot net netbsd
...
...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying lfs...
mountroot: trying nfs...
nfs_boot: trying RARP (and RPC/bootparam)
nfs_boot: client_addr=xxx.xxx.xxx.43 (RARP from xxx.xxx.xxx.13)
nfs_boot: server_addr=xxx.xxx.xxx.13
nfs_boot: hostname=box
nfs_boot: gateway=xxx.xxx.xxx.13
nfs_boot: my_mask=255.255.255.0
root on xxx.xxx.xxx.13:/tftpboot/netbsd
root time: 0x3bd836b6
root file system type: nfs
init: copying out path '/sbin/init' 11  <- stop here
---

RARP/NFS server is Linux box.

I put following files on server.
  /tftpboot/ofwboot.net, /tftpboot/xxxxxxxx (hex IP address of
  client_box, link to ofwboot.net), untar base.tgz, etc.tgz, and
  instfs.tgz under /tftpboot/netbsd, create /tftpboot/netbsd/swap,
  extract netbsd.GENERIC.gz and put it under /tftpboot/netbsd as same
  as ofwboot

And I put following information on server.
  /etc/ethers: X:X:X:X   box
  /etc/bootparams: box root=xxx.xxx.xxx.13:/tftpboot/netbsd gateway=xxx.xxx.xxx.13:255.255.0.0
  /tftpboot/netbsd/etc/hosts: put server and client addresses
  /tftpboot/netbsd/etc/myname: box
  /tftpboot/netbsd/etc/ifconfig.hme0: put client IP address
  /tftpboot/netbsd/etc/fstab: server:/tftpboot/netbsd / nfs rw 0 0
			      server:/tftpboot/netbsd/usr /usr nfs rw 0 0
			      /swap none swap sw

When I boot with "boot net netbsd -s", only I got another message,
"init: copying out flags '-s' 3". It also stopped loading at the same
point.

I'm missing something?
Any ideas?
--
Hitoshi