Subject: 20011222-1.5ZA installed on a Sun Blade 100
To: None <port-sparc64@netbsd.org>
From: Peter Kieltyka <peter@eluks.com>
List: port-sparc64
Date: 02/03/2002 11:30:55
This is a multi-part message in MIME format.
------=_NextPart_000_002C_01C1ACA6.3E86E120
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hi, I just finished installing NetBSD 20011222-1.5ZA. It installed =
smoothly, however I noticed a few problems when the system loading... =
Here is my dmesg (so you guys know what is working and what isn't) ..=20
--------------------
NetBSD 1.5ZA (GENERIC) #0: Sun Dec 23 03:12:29 PST 2001
chs@ultra2:/build/obj/build/src/sys/arch/sparc64/compile/GENERIC
total memory =3D 128 MB
avail memory =3D 108 MB
using 832 buffers containing 6656 KB of memory
bootpath: /pci@1f,0/ide@d,0/disk@0,0
mainbus0 (root): SUNW,Sun-Blade-100
cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 502 MHz, version 0 FPU
cpu0: physical 4K instruction (32 b/l), 4K data (32 b/l), 8192K external =
(64 b/l)=20
psycho0 at mainbus0
pci108e,a001: impl 0, version 0: ign 7c0 bus range 0 to 1; PCI bus 0
DVMA map: c0000000 to e0000000
pci0 at psycho0
pci0: i/o space, memory space enabled
ebus0 at pci0 dev 12 function 0
ebus0: Sun Microsystems PCIO Ebus2 (US III), revision 0x01
flashprom at ebus0 addr 0-fffff not configured
clock0 at ebus0 addr 0-1fff: mk48t59: hostid 8304ad04
ebus_attach: idprom: incomplete
gem0 at pci0 dev 12 function 1: Sun Microsystems ERI Ethernet (rev. =
0x01)
gem0: interrupting at ivec 3006
gem0: Ethernet address 00:03:ba:04:ad:04
ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0008bb, model 0x0002, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fwohci0 at pci0 dev 12 function 2: Sun Microsystems FireWire controller =
(rev. 0x01)
fwohci0: interrupting at ivec 1c
fwohci0: OHCI 1.0, 00:03:ba:ff:fe:04:ad:04, 400Mb/s, 2048 max_rec, 4 =
iso_ctx
ohci0 at pci0 dev 12 function 3: Sun Microsystems USB controller (rev. =
0x01)
ohci0: interrupting at ivec 24
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Sun Microsystem OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ebus1 at pci0 dev 7 function 0
ebus1: Acer Labs M1543 PCI-ISA Bridge, revision 0x00
dma at ebus1 addr 0-ffff ipl 42 not configured
power at ebus1 addr 800-82f ipl 32 not configured
com0 at ebus1 addr 3f8-3ff ipl 43: ns16550a, working fifo
com0: console
com1 at ebus1 addr 2e8-2ef ipl 43: ns16550a, working fifo
Acer Labs M7101 Power Management Controller (miscellaneous prehistoric) =
at pci0 dev 3 function 0 not configured
Acer Labs M5451 AC-Link Controller Audio Device (audio multimedia, =
revision 0x01) at pci0 dev 8 function 0 not configured
pciide0 at pci0 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller =
(rev. 0xc3)
pciide0: bus-master DMA support present
pciide0: can't find PCI/ISA bridge, downgrading to Ultra/33
pciide0: primary channel configured to native-PCI mode
pciide0: using ivec 180c for native-PCI interrupt
atapibus0 at pciide0 channel 0: 2 targets
cd0 at atapibus0 drive 1: <LTN485S, , JOU2> type 5 cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0 at pciide0 channel 0 drive 0: <ST315320A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 14594 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 29888820 =
sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using =
DMA data transfers)
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using =
DMA data transfers)
pciide0: secondary channel configured to native-PCI mode
pciide0: disabling secondary channel (no drives)
ppb0 at pci0 dev 5 function 0: Digital Equipment DECchip 21152 PCI-PCI =
Bridge (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ATI Technologies product 0x4752 (VGA display, revision 0x27) at pci0 dev =
19 function 0 not configured
pcons at mainbus0 not configured
No counter-timer -- using %tick at 502MHz as system clock.
Kernelized RAIDframe activated
fw0 at fwohci0: 00:03:ba:ff:fe:04:ad:04:0a:02:20:00:00:00:00:00
root on wd0a dumps on wd0b
root file system type: ffs
--------------------
the only problems from what I can see are:
flashprom at ebus0 addr 0-fffff not configured
dma at ebus1 addr 0-ffff ipl 42 not configured
power at ebus1 addr 800-82f ipl 32 not configured
Acer Labs M7101 Power Management Controller (miscellaneous prehistoric) =
at pci0 dev 3 function 0 not configured
Acer Labs M5451 AC-Link Controller Audio Device (audio multimedia, =
revision 0x01) at pci0 dev 8 function 0 not configured
pciide0: can't find PCI/ISA bridge, downgrading to Ultra/33
ATI Technologies product 0x4752 (VGA display, revision 0x27) at pci0 dev =
19 function 0 not configured
pcons at mainbus0 not configured
..... however, the system does boot.. and I did use it... the only =
problem I could see when I was actually using the OS was when I tried to =
install apache, perl5, wget from the pkgsrc ... it gave me "undefined =
reference" errors.. I checked the mailing archive and found, =
http://mail-index.netbsd.org/port-sparc64/2002/01/07/0001.html ... so I =
installed that patch into the source tree, and tried to compile my =
kernel again and it failed during my make depend:
../../machine/frame.h:48: opt_sparc_arch.h: No such file or directory
mkdep: compile failed.
*** Error code 1
Stop.
make: stopped in /usr/src/sys/arch/sparc64/compile/SPARKY/lib/kern
*** Error code 1
.... If a NetBSD developer wants a shell or something on this computer, =
so they can try to fix the Sun Blade 100 support on NetBSD, just email =
me personally and I will set something up.. (the box is always up .. =
unless it crashes .. *knock on wood*)
-Peter
------=_NextPart_000_002C_01C1ACA6.3E86E120
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2600.0" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hi, I just finished installing NetBSD=20
20011222-1.5ZA. It installed smoothly, however I noticed a few =
problems=20
when the system loading... Here is my dmesg (so you guys know what is =
working=20
and what isn't) .. </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>--------------------</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>NetBSD 1.5ZA (GENERIC) #0: Sun Dec 23 =
03:12:29 PST=20
2001<BR> <A=20
href=3D"mailto:chs@ultra2:/build/obj/build/src/sys/arch/sparc64/compile/G=
ENERIC">chs@ultra2:/build/obj/build/src/sys/arch/sparc64/compile/GENERIC<=
/A><BR>total=20
memory =3D 128 MB<BR>avail memory =3D 108 MB<BR>using 832 buffers =
containing 6656 KB=20
of memory<BR>bootpath: <A>/pci@1f,0/ide@d,0/disk@0,0</A><BR>mainbus0 =
(root):=20
SUNW,Sun-Blade-100<BR>cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 502 MHz, =
version 0=20
FPU<BR>cpu0: physical 4K instruction (32 b/l), 4K data (32 b/l), 8192K =
external=20
(64 b/l) <BR>psycho0 at mainbus0<BR>pci108e,a001: impl 0, version 0: ign =
7c0 bus=20
range 0 to 1; PCI bus 0<BR>DVMA map: c0000000 to e0000000<BR>pci0 at=20
psycho0<BR>pci0: i/o space, memory space enabled<BR>ebus0 at pci0 dev 12 =
function 0<BR>ebus0: Sun Microsystems PCIO Ebus2 (US III), revision=20
0x01<BR>flashprom at ebus0 addr 0-fffff not configured<BR>clock0 at =
ebus0 addr=20
0-1fff: mk48t59: hostid 8304ad04<BR>ebus_attach: idprom: =
incomplete<BR>gem0 at=20
pci0 dev 12 function 1: Sun Microsystems ERI Ethernet (rev. =
0x01)<BR>gem0:=20
interrupting at ivec 3006<BR>gem0: Ethernet address =
00:03:ba:04:ad:04<BR>ukphy0=20
at gem0 phy 1: Generic IEEE 802.3u media interface<BR>ukphy0: OUI =
0x0008bb,=20
model 0x0002, rev. 1<BR>ukphy0: 10baseT, 10baseT-FDX, 100baseTX, =
100baseTX-FDX,=20
auto<BR>fwohci0 at pci0 dev 12 function 2: Sun Microsystems FireWire =
controller=20
(rev. 0x01)<BR>fwohci0: interrupting at ivec 1c<BR>fwohci0: OHCI 1.0,=20
00:03:ba:ff:fe:04:ad:04, 400Mb/s, 2048 max_rec, 4 iso_ctx<BR>ohci0 at =
pci0 dev=20
12 function 3: Sun Microsystems USB controller (rev. 0x01)<BR>ohci0:=20
interrupting at ivec 24<BR>ohci0: OHCI version 1.0, legacy =
support<BR>usb0 at=20
ohci0: USB revision 1.0<BR>uhub0 at usb0<BR>uhub0: Sun Microsystem OHCI =
root=20
hub, class 9/0, rev 1.00/1.00, addr 1<BR>uhub0: 4 ports with 4 =
removable, self=20
powered<BR>ebus1 at pci0 dev 7 function 0<BR>ebus1: Acer Labs M1543 =
PCI-ISA=20
Bridge, revision 0x00<BR>dma at ebus1 addr 0-ffff ipl 42 not =
configured<BR>power=20
at ebus1 addr 800-82f ipl 32 not configured<BR>com0 at ebus1 addr =
3f8-3ff ipl=20
43: ns16550a, working fifo<BR>com0: console<BR>com1 at ebus1 addr =
2e8-2ef ipl=20
43: ns16550a, working fifo<BR>Acer Labs M7101 Power Management =
Controller=20
(miscellaneous prehistoric) at pci0 dev 3 function 0 not =
configured<BR>Acer Labs=20
M5451 AC-Link Controller Audio Device (audio multimedia, revision 0x01) =
at pci0=20
dev 8 function 0 not configured<BR>pciide0 at pci0 dev 13 function 0: =
Acer Labs=20
M5229 UDMA IDE Controller (rev. 0xc3)<BR>pciide0: bus-master DMA support =
present<BR>pciide0: can't find PCI/ISA bridge, downgrading to=20
Ultra/33<BR>pciide0: primary channel configured to native-PCI =
mode<BR>pciide0:=20
using ivec 180c for native-PCI interrupt<BR>atapibus0 at pciide0 channel =
0: 2=20
targets<BR>cd0 at atapibus0 drive 1: <LTN485S, , JOU2> type 5 =
cdrom=20
removable<BR>cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode =
2=20
(Ultra/33)<BR>wd0 at pciide0 channel 0 drive 0: =
<ST315320A><BR>wd0: drive=20
supports 16-sector PIO transfers, LBA addressing<BR>wd0: 14594 MB, 16383 =
cyl, 16=20
head, 63 sec, 512 bytes/sect x 29888820 sectors<BR>wd0: drive supports =
PIO mode=20
4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)<BR>wd0(pciide0:0:0): using =
PIO mode=20
4, Ultra-DMA mode 2 (Ultra/33) (using DMA data =
transfers)<BR>cd0(pciide0:0:1):=20
using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data=20
transfers)<BR>pciide0: secondary channel configured to native-PCI=20
mode<BR>pciide0: disabling secondary channel (no drives)<BR>ppb0 at pci0 =
dev 5=20
function 0: Digital Equipment DECchip 21152 PCI-PCI Bridge (rev. =
0x03)<BR>pci1=20
at ppb0 bus 1<BR>pci1: i/o space, memory space enabled<BR>ATI =
Technologies=20
product 0x4752 (VGA display, revision 0x27) at pci0 dev 19 function 0 =
not=20
configured<BR>pcons at mainbus0 not configured<BR>No counter-timer -- =
using=20
%tick at 502MHz as system clock.<BR>Kernelized RAIDframe =
activated<BR>fw0 at=20
fwohci0: 00:03:ba:ff:fe:04:ad:04:0a:02:20:00:00:00:00:00<BR>root on wd0a =
dumps=20
on wd0b<BR>root file system type: ffs</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>--------------------</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>the only problems from what I can see=20
are:</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>flashprom at ebus0 addr 0-fffff not=20
configured</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>dma at ebus1 addr 0-ffff ipl 42 not=20
configured<BR>power at ebus1 addr 800-82f ipl 32 not =
configured</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Acer Labs M7101 Power Management =
Controller=20
(miscellaneous prehistoric) at pci0 dev 3 function 0 not =
configured<BR>Acer Labs=20
M5451 AC-Link Controller Audio Device (audio multimedia, revision 0x01) =
at pci0=20
dev 8 function 0 not configured</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>pciide0: can't find PCI/ISA bridge, =
downgrading to=20
Ultra/33</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>ATI Technologies product 0x4752 (VGA =
display,=20
revision 0x27) at pci0 dev 19 function 0 not configured</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>pcons at mainbus0 not =
configured</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>..... however, the system does boot.. =
and I did use=20
it... the only problem I could see when I was actually using the OS was =
when I=20
tried to install apache, perl5, wget from the pkgsrc ... it gave me =
"undefined=20
reference" errors.. I checked the mailing archive and found, <A=20
href=3D"http://mail-index.netbsd.org/port-sparc64/2002/01/07/0001.html">h=
ttp://mail-index.netbsd.org/port-sparc64/2002/01/07/0001.html</A> =20
... so I installed that patch into the source tree, and tried to compile =
my=20
kernel again and it failed during my make depend:</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>../../machine/frame.h:48: =
opt_sparc_arch.h: No such=20
file or directory<BR>mkdep: compile failed.<BR>*** Error code =
1</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Stop.<BR>make: stopped in=20
/usr/src/sys/arch/sparc64/compile/SPARKY/lib/kern<BR>*** Error code=20
1</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>.... If a NetBSD developer wants a =
shell or=20
something on this computer, so they can try to fix the Sun Blade 100 =
support on=20
NetBSD, just email me personally and I will set something up.. (the box =
is=20
always up .. unless it crashes .. *knock on wood*)</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>-Peter</FONT></DIV></BODY></HTML>
------=_NextPart_000_002C_01C1ACA6.3E86E120--