On Sun, 25 Aug 2002, Andrey Petrov wrote:

> I suspect that your drive start negotiating sync/wide mode
> first and this is not supported by esp driver. If you can
> set ncr53c9x_debug to 0x3ff during boot and send a log it
> should show if this is a case. To do that you need to boot with -d
> flag

<snip>

> The log is supposed to be large so you'll better off with serial console
> which let you grab it.
>

I was already using a serial console, I'll try this when I get home.

-- 
Sten Spans

  "Life is pretty ok when you have
   too many suns to play with"