Try booting with -dDvV flags and see what it prints out.  (The boot process
will stop after the boot block is loaded.  To load the second stage bootloader
you will need to type:

	" /ofwboot" do-boot

at the `ok' prompt.)

Eduardo


On Mon, Jul 14, 2003 at 07:59:56AM +0200, Christoph Kaegi wrote:
> 
> I didn't get any answers on this.
> 
> I would really like to run netbsd on this box
> (plus on a second one) instead of solaris but
> I have to be sure they run stable and mirrored because
> they run name- and dhcpd services for 2000 users.
> 
> By the way, I forgot to mention, that it now runs
> current as of 9th of july (1.6U).
> 
> Thanks 
> Chris
> 
> On 2003.07.10 12:34, Christoph Kaegi wrote:
> > 
> > 
> > I have installed NetBSD 1.6R on a sun Netra T1 on disk0.
> > Then I have configured the second disk (disk1) as a 
> > RaidFrame Mirror second half, with a small partition
> > (sd1f) to boot from (made installboot to it and put
> > ofwboot and the kernel on it)
> > 
> > Know when I try to boot from the OFW Prompt, I get:
> > 
> > -------------------------------------- 8< --------------------------------------
> > ok boot disk1:f netbsd
> > Boot device: /pci@1f,0/pci@1/scsi@8/disk@1,0:f  File and args: netbsd
> > NetBSD IEEE 1275 Bootblock
> > ..>> NetBSD/sparc64 OpenFirmware Boot, Revision 1.6
> > >> (martin@sunny-weather.duskware.de, Sat Apr 26 07:55:04 CEST 2003)
> > loadfile: reading header
> > elf64_exec: Booting /pci@1f,0/pci@1/scsi@8/disk@1,0:f/netbsd
> > 1490376@0x1000000+58168@0x1800000+4136136@0x180e338 
> > symbols @ 0xfefc8380 112+147000+81111 start=0x1000000
> > chain: calling OF_chain(800000, d2d8, 1000000, fffc5a80, 18)
> > Fast Data Access MMU Miss
> > -------------------------------------- 8< --------------------------------------
> > 
> > What did I do wrong?
> > 
> 
> -- 
> ----------------------------------------------------------------------
> Christoph Kaegi                                           kgc@zhwin.ch
> ----------------------------------------------------------------------