Subject: attempted netbsd installs
To: None <port-sparc64@netbsd.org>
From: Ben Collver <collver1@comcast.net>
List: port-sparc64
Date: 11/20/2003 06:35:24
Good Day,

I have a couple problems installing NetBSD on my Ultra 10.  NetBSD-1.6.1
crashes during sysinst.  NetBSD-current can't see my hard drive.  I would
prefer to use -current.  Can anyone advise me on how I might resolve this?

Thank you,

Ben


NetBSD-1.6.1 sparc64 sysinst crash
----------------------------------
Alignment error: pid=14 comm=sysinst dsfsr=00000000:00800001 dsfar=fffffe61:72792f73 isfsr=00000000:00000000 pc=221b4c
pid 14 (sysinst), uid 0: exited on signal 10 (core not dumped, err = 14)
Bus error

NetBSD-1.6.1 sparc64 ide detection
----------------------------------
pciide0 at pci1 dev 3 function 0: CMD Technology PCI0646 (rev. 0x03)
pciide0: bus-master DMA support present
pciide0: primary channel configured to native-PCI mode
pciide0: using ivec 1820 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC AC21600H>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 1549 MB, 3148 cyl, 16 head, 63 sec, 512 bytes/sect x 3173184 sectors
wd0: drive supports PIO mode 4, DMA mode 2
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: secondary channel configured to native-PCI mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <CRD-8322B, 1998/09/24, 1.05> type 5 cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)

NetBSD-current (1.6ZF) sparc64 ide detection
--------------------------------------------
cmdide0 at pci1 dev 3 function 0
cmdide0: CMD Technology PCI0646 (rev. 0x03)
cmdide0: bus-master DMA support present
cmdide0: primary channel configured to native-PCI mode
cmdide0: using ivec 1820 for native-PCI interrupt
atabus0 at cmdide0 channel 0
cmdide0: secondary channel configured to native-PCI mode
atabus1 at cmdide0 channel 1
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <CRD-8322B, 1998/09/24, 1.05> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
cd0(cmdide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)