Subject: Netra T1/105 install issue
To: None <port-sparc64@netbsd.org>
From: Peter Eisch <peter@boku.net>
List: port-sparc64
Date: 02/25/2004 15:19:53
The 1.6.1 install iso boots fine from the cdrom, but the kernel is unable to
mount the atapi cdrom it seems. Thus the install of the sets fail and my
plans of a simple install have seemed to gone south. Does anyone have an
ISO that I can install from where this might be fixed?
Thanks,
Here's the dmesg:
ok boot cdrom
Boot device: /pci@1f,0/pci@1/pci@1/ide@e/cdrom@2:f File and args:
NetBSD IEEE 1275 Bootblock
..>> NetBSD/sparc64 OpenFirmware Boot, Revision 1.5
>> (autobuild@cs20.apochromatic.org, Mon Apr 7 09:50:05 UTC 2003)
devopen: getdisklabel sez no disk label
devopen: search_label sez no disk label
loadfile: reading header
elf64_exec: Booting /pci@1f,0/pci@1/pci@1/ide@e/cdrom@2,0:f/netbsd
4557480@0x1000000+5400584@0x1800000+2988024@0x1d26808
symbols @ 0xfff4a280 74 start=0x1000000
chain: calling OF_chain(800000, e478, 1000000, fffa3a80, 18)
[ netbsd ELF symbol table not valid ]
[ no symbol table formats found ]
Kernel size exceeds 4MB
consinit()
setting up stdin
chosen = f002d974, stdin @ 0x181a878
stdin instance = fff9b8a8
stdin node = f006aa3c
setting up stdout
stdout instance = fff9b5d8
stdout package = f006aa3c
buffer @ 0x2009d90
console is /pci@1f,0/pci@1,1/ebus@1/su@14,3803f8
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 1.6.1 (INSTALL) #0: Mon Apr 7 10:47:36 UTC 2003
autobuild@cs20.apochromatic.org:/autobuilder/build/netbsd-1-6/sparc64/OBJ/au
tobuilder/build/netbsd-1-6/src/sys/arch/sparc64/compile/INSTALL
total memory = 256 MB
avail memory = 223 MB
using 1651 buffers containing 13208 KB of memory
bootpath: /pci@1f,0/pci@1,0/pci@1,0/ide@e,0/cdrom@2,0:f
mainbus0 (root): SUNW,UltraSPARC-IIi-cEngine
cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 439.998 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 2048K external
(64 b/l)
psycho0 at mainbus0 addr 0xfffc0000
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 3; PCI bus 0
intr_establish: intr reused 7c0
DVMA map: c0000000 to e0000000
IOTSB: 12ac000 to 132c000
pci0 at psycho0
pci0: i/o space, memory space enabled
ppb0 at pci0 dev 1 function 1: Sun Microsystems Simba PCI bridge (rev. 0x13)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ebus0 at pci1 dev 1 function 0
ebus0: Sun Microsystems PCIO Ebus2, revision 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003,
72c000-72c003, 72f000-72f003
power at ebus0 addr 724000-724003 ipl 37 not configured
SUNW,pll at ebus0 addr 504000-504002 not configured
com0 at ebus0 addr 3803f8-3803ff ipl 28: ns16550a, working fifo
com0: console
com1 at ebus0 addr 3602f8-3602ff ipl 20: ns16550a, working fifo
lpt0 at ebus0 addr 340278-340287, 30015c-30015d, 700000-70000f ipl 34
fdthree at ebus0 addr 3203f0-3203f7, 706000-70600f, 720000-720003 ipl 39 not
configured
clock0 at ebus0 addr 0-1fff: mk48t59: hostid 80c1b26c
flashprom at ebus0 addr 0-fffff not configured
watchdog at ebus0 addr 200000-20003f ipl 4 not configured
display7seg at ebus0 addr 200040-200040 not configured
beeper at ebus0 addr 722000-722003 not configured
flashprom at ebus0 addr 400000-5fffff not configured
flashprom at ebus0 addr 800000-9fffff not configured
i2c at ebus0 addr 600000-600003 ipl 40 not configured
i2c at ebus0 addr 100000-100003 ipl 27 not configured
SUNW,lom at ebus0 addr 400000-400063 not configured
hme0 at pci1 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1
hme0: interrupting at ivec 3021
hme0: Ethernet address 08:00:20:c1:b2:6c
ukphy0 at hme0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0006b8, model 0x000c, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy1 at hme0 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x0006b8, model 0x000c, rev. 1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
siop0 at pci1 dev 2 function 0: Symbios Logic 53c875 (ultra-wide scsi)
siop0: using on-board RAM
siop0: interrupting at ivec 20
scsibus0 at siop0: 16 targets, 8 luns per target
hme1 at pci1 dev 3 function 1: Sun Happy Meal Ethernet, rev. 1
hme1: interrupting at ivec 301a
hme1: Ethernet address 08:00:20:c1:b2:6c
ukphy2 at hme1 phy 0: Generic IEEE 802.3u media interface
ukphy2: OUI 0x0006b8, model 0x000c, rev. 1
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb1 at pci0 dev 1 function 0: Sun Microsystems Simba PCI bridge (rev. 0x13)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ppb2 at pci2 dev 1 function 0: Digital Equipment DECchip 21150 PCI-PCI
Bridge (rev. 0x04)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
pciide0 at pci3 dev 14 function 0: CMD Technology PCI0646 (rev. 0x03)
pciide0: bus-master DMA support present
pciide0: primary channel configured to native-PCI mode
intr_establish: intr reused 7c0
pciide0: using ivec 1800 for native-PCI interrupt
pciide0: secondary channel configured to native-PCI mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA CD-ROM XM-1902B, , 1114> type 5 cdrom
removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pcons at mainbus0 not configured
No counter-timer -- using %tick at 439MHz as system clock.
Using %tick -- intr in 4399982 cycles...done.
scsibus0: waiting 2 seconds for devices to settle...
siop0: alloc newcdb at PHY addr 0xc00ce000
sd0 at scsibus0 target 0 lun 0: <IBM, DNES30917SUN9.0G, SAD0> SCSI3 0/direct
fixed
sd0: 8637 MB, 4926 cyl, 27 head, 133 sec, 512 bytes/sect x 17689267 sectors
sd0: sync (50.0ns offset 16), 16-bit (40.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <FUJITSU, MAE3091L SUN9.0G, 0706> SCSI2
0/direct fixed
sd1: 8637 MB, 4926 cyl, 27 head, 133 sec, 512 bytes/sect x 17689267 sectors
sd1: sync (50.0ns offset 16), 16-bit (40.000MB/s) transfers, tagged queueing
raidattach: Asked for 8 units
Kernelized RAIDframe activated
Searching for raid components...
md0: internal 5120 KB image area
root on md0a dumps on md0b
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying lfs...
mountroot: trying nfs...
mountroot: trying ffs...
WARNING: clock gained 324 days -- CHECK AND RESET THE DATE!
root file system type: ffs
init: copying out flags `-s' 3
init: copying out path `/sbin/init' 11
erase ^?, werase ^W, kill ^U, intr ^C
Terminal type (just hit ENTER for 'sun'):