--wFODXFufd9YTJ4hK
Content-Type: multipart/mixed; boundary="tn/dP4bPCRmapcqv"
Content-Disposition: inline


--tn/dP4bPCRmapcqv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

* On 2004-05-27 at 19:12 BST, Erik E. Fair wrote:

> Did the kernel mark the USB keyboard as "console" at boot time?

For completeness sake, I've attached the full dmesg.

Cheers,

--=20
Jonathan Perkin                         <jonathan@perkin.org.uk>
BBC Internet Services         http://www.perkin.org.uk/jonathan/

--tn/dP4bPCRmapcqv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.blade100"

console is keyboard/display
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 2.0F (GENERIC) #1: Thu May 27 16:15:50 BST 2004
	root@pc03.is.bbc.co.uk:/usr/obj/sys/arch/sparc64/compile/GENERIC
total memory = 512 MB
avail memory = 489 MB
bootpath: /pci@1f,0/ide@d,0/disk@0,0
mainbus0 (root): SUNW,Sun-Blade-100: hostid 831d8f08
cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 502 MHz, version 0 FPU
cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 1024K external (64 b/l)
psycho0 at mainbus0
pci108e,a001: impl 0, version 0: ign 7c0 bus range 0 to 1; PCI bus 0
DVMA map: c0000000 to e0000000
IOTSB: dc4000 to e44000
pci0 at psycho0
pci0: i/o space, memory space enabled
ebus0 at pci0 dev 12 function 0
ebus0: Sun Microsystems, Inc. PCIO Ebus2 (US III), revision 0x01
flashprom at ebus0 addr 0-fffff not configured
clock0 at ebus0 addr 0-1fff: mk48t59
ebus_attach: idprom: incomplete
ebus1 at pci0 dev 7 function 0
ebus1: Acer Labs M1543 PCI-ISA Bridge, revision 0x00
dma at ebus1 addr 0-ffff ipl 42 not configured
power at ebus1 addr 800-82f ipl 32 not configured
com0 at ebus1 addr 3f8-3ff ipl 43: ns16550a, working fifo
com1 at ebus1 addr 2e8-2ef ipl 43: ns16550a, working fifo
gem0 at pci0 dev 12 function 1: Sun Microsystems, Inc. ERI Ethernet (rev. 0x01)
gem0: interrupting at ivec 3006
gem0: Ethernet address 00:03:ba:1d:8f:08, 2KB RX fifo, 2KB TX fifo
ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0008bb, model 0x0002, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fwohci0 at pci0 dev 12 function 2: Sun Microsystems, Inc. FireWire controller (rev. 0x01)
fwohci0: interrupting at ivec 1c
fwohci0: OHCI 1.0, 00:03:ba:ff:fe:1d:8f:08, 400Mb/s, 2048 max_rec, 4 ir_ctx, 4 it_ctx
ohci0 at pci0 dev 12 function 3: Sun Microsystems, Inc. USB controller (rev. 0x01)
ohci0: interrupting at ivec 24
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Sun Microsystem OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
Acer Labs M7101 Power Management Controller (miscellaneous prehistoric) at pci0 dev 3 function 0 not configured
autri0 at pci0 dev 8 function 0: Acer Labs M5451 AC-Link Controller Audio Device (rev. 0x01)
autri0: interrupting at ivec 23
autri0: ac97: Analog Devices AD1881A codec; headphone, Analog Devices Phat Stereo
audio0 at autri0: full duplex, mmap, independent
aceride0 at pci0 dev 13 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
aceride0: bus-master DMA support present
aceride0: primary channel configured to native-PCI mode
aceride0: using ivec 180c for native-PCI interrupt
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to native-PCI mode
atabus1 at aceride0 channel 1
machfb0 at pci0 dev 19 function 0: ATI Technologies Rage XL (rev. 0x27)
machfb0: 16 MB aperture at 0xe003a000, 4 KB registers at 0xe0839c00
machfb0: 8188 KB SDRAM 114.992 MHz, maximum RAMDAC clock 230 MHz
machfb0: initial resolution 1280x1024 at 8 bpp
wsdisplay0 at machfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (default, vt100 emulation)
ppb0 at pci0 dev 5 function 0: Intel S21152BB PCI to PCI Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
pcons at mainbus0 not configured
No counter-timer -- using %tick at 502MHz as system clock.
Kernelized RAIDframe activated
fw0 at fwohci0: 00:03:ba:ff:fe:1d:8f:08:0a:02:ff:ff:f0:01:00:00
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <LTN486S, , Y3S2> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0 at atabus0 drive 0: <ST320011A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19092 MB, 38792 cyl, 16 head, 63 sec, 512 bytes/sect x 39102336 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA data transfers)
cd0(aceride0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: vendor 0x0430 product 0x0100, rev 1.10/1.05, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 4 configuration 1 interface 0
uhidev1: vendor 0x0430 product 0x0005, rev 1.00/1.02, addr 3, iclass 3/1
ukbd0 at uhidev1
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 4 added (default, vt100 emulation)

--tn/dP4bPCRmapcqv--

--wFODXFufd9YTJ4hK
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (NetBSD)

iQEVAwUBQLb61SFee6/VMqV4AQKIcQf8C0YlSuZDOXVQj3Irw0DWyI26+AuCqz2s
Su70fNhKWxbgYH1SOSMyGV9ypwKYxTNgfhK7kZLsKZOCBqyzZjuzVKhA509lr0K1
0ZOI1y8cDpGzmGEcbb9u6m12RFA6Ty/LgD8SoBqGTA4n7SyDYau67NHaz33SdPeJ
MxOwn0t0ZnI6ulS4wGHaySEypXiQMB5lHnA7l3uj09bEGr70co0O8y5JQbvobxpY
ysaep5RZ4fJjwM8TG6SJfb9HQuzCVFhYxGMWiiMvQ8h8q4n6LAzYfZEm8eFy+wiU
YLgAWuiwGLMxZfoZe1DkFc0SNd/CQPZJ+aXbOt2CxqmrNEurntV46w==
=NxY2
-----END PGP SIGNATURE-----

--wFODXFufd9YTJ4hK--