Hi,

I'm booting a Netra x1 w/ NetBSD 2.0_BETA (INSTALL).
It freezes after
	md0: internal 5120 KB image area

I'm going to install netbsd-1-6 back again in the next 12 hours if no
solution has been found in the meantime. It's meaned to be a production
server.

The output & dmesg below.

Thanks

Executing last command: boot cdrom
Boot device: /pci@1f,0/ide@d/cdrom@2,0:f  File and args:
NetBSD IEEE 1275 Bootblock
..>> NetBSD/sparc64 OpenFirmware Boot, Revision 1.7
>> (nethence@niet.nethence.com, Sat Jun 26 19:14:40 CEST 2004)
devopen: getdisklabel sez no disk label
devopen: search_label sez no disk label
loadfile: reading header
elf64_exec: Booting /pci@1f,0/ide@d/cdrom@2,0:f/netbsd
4838824@0x1000000+5407896@0x1800000+2980712@0x1d28498
symbols @ 0xfff60380 133 start=0x1000000
chain: calling OF_chain(800000, cbc8, 1000000, fffc5a80, 18)
Kernel size exceeds 4MB
console is /pci@1f,0/isa@7/serial@0,3f8
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 2.0_BETA (INSTALL) #0: Sat Jun 26 20:08:03 CEST 2004

nethence@niet.nethence.com:/usr/obj/sys/arch/sparc64/compile/INSTALL
total memory = 1024 MB
avail memory = 987 MB
bootpath: /pci@1f,0/ide@d,0/cdrom@2,0:f
mainbus0 (root): SUNW,UltraAX-i2: hostid 8304f8b4
cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 400 MHz, version 0 FPU
cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 256K external (64
b/l)
psycho0 at mainbus0
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 0; PCI bus 0
DVMA map: 60000000 to 80000000
IOTSB: 1a74000 to 1af4000
pci0 at psycho0
pci0: i/o space, memory space enabled
ebus0 at pci0 dev 7 function 0
ebus0: Acer Labs M1543 PCI-ISA Bridge, revision 0x00
dma at ebus0 addr 0-ffff ipl 42 not configured
rtc0 at ebus0 addr 70-71: mc146818 compatible time-of-day clock: ds1287
power at ebus0 addr 2000-2007 ipl 35 not configured
SUNW,lomh at ebus0 addr 8010-8011 ipl 42 not configured
com0 at ebus0 addr 3f8-3ff ipl 43: ns16550a, working fifo
com0: console
com1 at ebus0 addr 2e8-2ef ipl 43: ns16550a, working fifo
flashprom at ebus0 addr 0-7ffff not configured
Acer Labs M7101 Power Management Controller (miscellaneous prehistoric)
at pci0 dev 3 function 0 not configured
tlp0 at pci0 dev 12 function 0: Davicom DM9102A Ethernet, pass 3.1
tlp0: broken MicroWire interface detected; setting SROM size to 1Kb
tlp0: interrupting at ivec 3006
tlp0: Ethernet address 00:03:ba:04:f8:b4
ukphy0 at tlp0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000676, model 0x0004, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlp1 at pci0 dev 5 function 0: Davicom DM9102A Ethernet, pass 3.1
tlp1: broken MicroWire interface detected; setting SROM size to 1Kb
tlp1: interrupting at ivec 301c
tlp1: Ethernet address 00:03:ba:04:f8:b4
ukphy1 at tlp1 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x000676, model 0x0004, rev. 0
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0 at pci0 dev 10 function 0: Acer Labs M5237 USB Host Controller
(rev. 0x03)
ohci0: interrupting at ivec 24
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
aceride0 at pci0 dev 13 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
aceride0: bus-master DMA support present
aceride0: primary channel configured to native-PCI mode
aceride0: using ivec 180c for native-PCI interrupt
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to native-PCI mode
atabus1 at aceride0 channel 1
pcons at mainbus0 not configured
No counter-timer -- using %tick at 400MHz as system clock.
Kernelized RAIDframe activated
md0: internal 5120 KB image area