From: Chris Ross <cross+netbsd@distal.com>
Subject: sparc64 SMP support
Date: Fri, 25 Jun 2004 12:34:14 -0400
Message-ID: <40DC5406.2070506@distal.com>

Hi, all.

cross+netbsd>    I have another 2x Netra next to it, too, so I
cross+netbsd> should have what I need to do the hacking.  :-)

My Ultra2(2CPU) had done in the panic.
Is it possible to get by helping?

--------
NetBSD 2.0G (GENERIC.MP) #1: Sun Aug 29 21:27:06 JST 2004
        mochi@daiki.thn.ne.jp:/local/src/NetBSD/sparc64/src/sys/arch/sparc64/compile/obj/GENERIC.MP
total memory = 512 MB
avail memory = 487 MB
bootpath: /sbus@1f,0/SUNW,fas@e,8800000/sd@0,0
mainbus0 (root): SUNW,Ultra-2: hostid xxxxxxxx
cpu0 at mainbus0: SUNW,UltraSPARC @ 199.987 MHz, version 0 FPU
cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 1024K external (64 b/l)
cpu1 at mainbus0: SUNW,UltraSPARC @ 199.987 MHz, version 0 FPU
cpu1: 32K instruction (32 b/l), 16K data (32 b/l), 1024K external (64 b/l)
timer0 at mainbus0 addr 0xfffc3c00 irq vectors 7f0 and 7f1
sbus0 at mainbus0 addr 0xfffc8000: clock = 25 MHz
DVMA map: ff800000 to ffffe000
IOTSB: f8c000 to f8e000
audiocs0 at sbus0 slot 13 offset 0xc000000 vector 24 ipl 8: CS4231A
audio0 at audiocs0: full duplex
auxio0 at sbus0 slot 15 offset 0x1900000
flashprom at sbus0 slot 15 offset 0x0 not configured
SUNW,fdtwo at sbus0 slot 15 offset 0x1400000 vector 29 ipl 11 not configured
clock0 at sbus0 slot 15 offset 0x1200000: mk48t59
zs0 at sbus0 slot 15 offset 0x1100000 vector 28 ipl 12 softpri 6
zstty0 at zs0 channel 0 (console i/o)
zstty1 at zs0 channel 1
zs1 at sbus0 slot 15 offset 0x1000000 vector 28 ipl 12 softpri 6
zstty2 at zs1 channel 0
kbd0 at zstty2
zstty3 at zs1 channel 1
ms0 at zstty3
intr_establish: intr reused 7e8
sc at sbus0 slot 15 offset 0x1300000 not configured
SUNW,pll at sbus0 slot 15 offset 0x1304000 not configured
esp0 at sbus0 slot 14 offset 0x8800000 vector 20 ipl 3: FAS366/HME, 40MHz, SCSI ID 7
scsibus0 at esp0: 16 targets, 8 luns per target
hme0 at sbus0 slot 14 offset 0x8c00000 vector 21 ipl 6: Sun Happy Meal Ethernet(SUNW,hme)
hme0: Ethernet address xx:xx:xx:xx:xx:xx
nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpp0 at sbus0 slot 14 offset 0xc800000 vector 22 ipl 2: DMA rev unknown (0x20000000)
bpp: hcr 0 ocr 2008 tcr 8 or 0
dma0 at sbus0 slot 0 offset 0x81000: DMA rev esc
esp1 at dma0 slot 0 offset 0x80000 vector 3 ipl 3: ESP200, 25MHz, SCSI ID 7
scsibus1 at esp1: 8 targets, 8 luns per target
lebuffer0 at sbus0 slot 0 offset 0x40000: 128K memory
le0 at lebuffer0 slot 0 offset 0x60000 vector 4 ipl 6: address xx:xx:xx:xx:xx:xx
le0: 64 receive buffers, 16 transmit buffers
SUNW,ffb at mainbus0 addr 0xfec00000 not configured
pcons at mainbus0 not configured
raidattach: Asked for 8 units
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <IBM, DPSS-309170M, S96H> disk fixed
sd0: 8748 MB, 14627 cyl, 3 head, 408 sec, 512 bytes/sect x 17916240 sectors
sd0: sync (100.00ns offset 15), 16-bit (20.000MB/s) transfers
sd1 at scsibus0 target 1 lun 0: <IBM, DPSS-309170M, S96H> disk fixed
sd1: 8748 MB, 14627 cyl, 3 head, 408 sec, 512 bytes/sect x 17916240 sectors
sd1: sync (100.00ns offset 15), 16-bit (20.000MB/s) transfers
cd0 at scsibus0 target 6 lun 0: <PLEXTOR, CD-ROM PX-32TS, 1.03> cdrom removable
cd0: sync (100.00ns offset 15), 8-bit (10.000MB/s) transfers
Searching for RAID components...
root on sd0a dumps on sd0b
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying lfs...
mountroot: trying nfs...
mountroot: trying ffs...
root file system type: ffs
cpu_args @ 0xfff90000
ktext 1000000, ktextp 47400000, ektext 14ec000
kdata 1800000, kdatap 46c00000, ekdata 18f8000
mp_start fff90050, mp_start_size 0x50
cpu0: booting secondary processors:
node f0066528, cpuinfo 47e40000, initstack 0xe0020000
cpu1 now spinning idle (waited 1 iterations)

trap type 0x34: pc=1333040 npc=1333044 pstate=820006<PRIV,IE>
kernel trap 34: mem address not aligned
cpu0 paused.
Stopped in pid 1.1 (init) at    netbsd:cc_microtime+0x19c:      ldx
[%fp + 0x7df], %g2
db{1}>

--
;; MOCHIZUKI Tomomitsu mailto:mochi@thn.ne.jp