Some of you may recall that I tried last year to get my Netra working as
a wireless gateway with a WaveLan card and PCI-cardbus adapter[1].  I
recently dusted things off to give it another try with 2.0, and regret
to report that it's still not working.  The "spurious vector" messages
are gone, but the card still isn't found:

NetBSD 2.0_RC2 (PARANOIA) #0: Sat Oct  2 23:10:18 UTC 2004
	msanders@paranoia.confusion.net:/usr/src/sys/arch/sparc64/compile/PARANOIA
total memory = 128 MB
avail memory = 114 MB
bootpath: /pci@1f,0/pci@1,1/scsi@2,0/disk@0,0
mainbus0 (root): SUNW,UltraSPARC-IIi-cEngine: hostid 80c21532
cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 360.030 MHz, version 0 FPU
cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 1024K external (64 b/l)
psycho0 at mainbus0 addr 0xfffc0000
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 3; PCI bus 0
DVMA map: c0000000 to e0000000
IOTSB: 412000 to 492000
pci0 at psycho0
pci0: i/o space, memory space enabled
ppb0 at pci0 dev 1 function 1: Sun Microsystems, Inc. Simba PCI bridge (rev. 0x13)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ebus0 at pci1 dev 1 function 0
ebus0: Sun Microsystems, Inc. PCIO Ebus2, revision 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003
power at ebus0 addr 724000-724003 ipl 37 not configured
SUNW,pll at ebus0 addr 504000-504002 not configured
com0 at ebus0 addr 3803f8-3803ff ipl 28: ns16550a, working fifo
com0: console
com1 at ebus0 addr 3602f8-3602ff ipl 20: ns16550a, working fifo
lpt0 at ebus0 addr 340278-340287, 30015c-30015d, 700000-70000f ipl 34
fdthree at ebus0 addr 3203f0-3203f7, 706000-70600f, 720000-720003 ipl 39 not configured
clock0 at ebus0 addr 0-1fff: mk48t59
flashprom at ebus0 addr 0-fffff not configured
watchdog at ebus0 addr 200000-20003f ipl 4 not configured
display7seg at ebus0 addr 200040-200040 not configured
beeper at ebus0 addr 722000-722003 not configured
flashprom at ebus0 addr 400000-5fffff not configured
flashprom at ebus0 addr 800000-9fffff not configured
i2c at ebus0 addr 600000-600003 ipl 40 not configured
i2c at ebus0 addr 100000-100003 ipl 27 not configured
SUNW,lom at ebus0 addr 400000-400063 not configured
hme0 at pci1 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1
hme0: interrupting at ivec 3021
hme0: Ethernet address 08:00:20:c2:15:32
ukphy0 at hme0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0006b8, model 0x000c, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy1 at hme0 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x0006b8, model 0x000c, rev. 1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
esiop0 at pci1 dev 2 function 0: Symbios Logic 53c875 (ultra-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at ivec 20
scsibus0 at esiop0: 16 targets, 8 luns per target
hme1 at pci1 dev 3 function 1: Sun Happy Meal Ethernet, rev. 1
hme1: interrupting at ivec 301a
hme1: Ethernet address 08:00:20:c2:15:32
ukphy2 at hme1 phy 0: Generic IEEE 802.3u media interface
ukphy2: OUI 0x0006b8, model 0x000c, rev. 1
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb1 at pci0 dev 1 function 0: Sun Microsystems, Inc. Simba PCI bridge (rev. 0x13)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ppb2 at pci2 dev 1 function 0: Digital Equipment DECchip 21150 PCI-PCI Bridge (rev. 0x04)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
cmdide0 at pci3 dev 14 function 0
cmdide0: CMD Technology PCI0646 (rev. 0x03)
cmdide0: bus-master DMA support present
cmdide0: primary channel configured to native-PCI mode
cmdide0: using ivec 1802 for native-PCI interrupt
atabus0 at cmdide0 channel 0
cmdide0: secondary channel configured to native-PCI mode
atabus1 at cmdide0 channel 1
cbb0 at pci3 dev 15 function 0: Texas Instruments PCI1410 PCI-CardBus Bridge (rev. 0x01)
cbb0: interrupting at ivec 3
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0
pcmcia0 at cardslot0
pcons at mainbus0 not configured
No counter-timer -- using %tick at 360MHz as system clock.
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST318203LSUN18G, 034A> disk fixed
sd0: 17274 MB, 7508 cyl, 19 head, 248 sec, 512 bytes/sect x 35378533 sectors
sd0: sync (50.00ns offset 15), 16-bit (40.000MB/s) transfers, tagged queueing
root on sd0a dumps on sd0b
root file system type: ffs

Any suggestions as to where to start debugging this would be appreciated.

:: Mike ::

[1]: http://www.google.com/search?q=site%3Anetbsd.org+cbb+spurious+vector