Hi,

recently I had the opportunity to start a Sun Blade 100 from a bootable
CD with NetBSD 2.0 RC4.
Everything looked fine until I hit the ENTER key on the attached USB
keyboard and nothing happened :-/.

Researching this on mail-index.NetBSD.org afterwards showed that it is
a known problem but I had not anticipated this from reading the port's
web page.

Would it be ok to update the web pages with the information that the USB
keyboard does not work yet and people need to have a serial connection
to the machine?
The web pages also talk a lot about problems with gcc 2.95 on sparc64,
which should be updated as well now that gcc 3 is used in the tree.

ciao
     Klaus

Sun Blade 100 (UltraSPARC-IIe), No Keyboard
OpenBoot 4.0, 256 MB memory installed, Serial #12345678.
Ethernet address 0:3:ba:ab:cd:ef, Host ID: 83abcdef.



Initializing Memory
Boot device: cdrom  File and args:
NetBSD IEEE 1275 Bootblock
>> NetBSD/sparc64 OpenFirmware Boot, Revision 1.7
>> (autobuild@tgm.netbsd.org, Sat Oct 16 02:26:51 UTC 2004)
devopen: getdisklabel sez no disk label
devopen: search_label sez no disk label
loadfile: reading header
elf64_exec: Booting /pci@1f,0/ide@d/cdrom@1,0:f/netbsd
4879176@0x1000000+5406424@0x1800000+2982184@0x1d27ed8 
symbols @ 0xfff1c380 133 start=0x1000000
chain: calling OF_chain(800000, cbc8, 1000000, fff63a80, 18)
Kernel size exceeds 4MB
console is /pci@1f,0/isa@7/serial@0,3f8
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 2.0_RC4 (INSTALL) #0: Sat Oct 16 03:41:31 UTC 2004
	autobuild@tgm.netbsd.org:/autobuild/netbsd-2-0/sparc64/OBJ/autobuild/netbsd-2-0/src/sys/arch/sparc64/compile/INSTALL
total memory = 256 MB
avail memory = 236 MB
bootpath: /pci@1f,0/ide@d,0/cdrom@1,0:f
mainbus0 (root): SUNW,Sun-Blade-100: hostid 83abcdef
cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 502 MHz, version 0 FPU
cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 1024K external (64 b/l)
psycho0 at mainbus0
pci108e,a001: impl 0, version 0: ign 7c0 bus range 0 to 1; PCI bus 0
DVMA map: c0000000 to e0000000
IOTSB: 710000 to 790000
pci0 at psycho0
pci0: i/o space, memory space enabled
ebus0 at pci0 dev 12 function 0
ebus0: Sun Microsystems, Inc. PCIO Ebus2 (US III), revision 0x01
flashprom at ebus0 addr 0-fffff not configured
clock0 at ebus0 addr 0-1fff: mk48t59
ebus_attach: idprom: incomplete
ebus1 at pci0 dev 7 function 0
ebus1: Acer Labs M1543 PCI-ISA Bridge, revision 0x00
dma at ebus1 addr 0-ffff ipl 42 not configured
power at ebus1 addr 800-82f ipl 32 not configured
com0 at ebus1 addr 3f8-3ff ipl 43: ns16550a, working fifo
com0: console
com1 at ebus1 addr 2e8-2ef ipl 43: ns16550a, working fifo
gem0 at pci0 dev 12 function 1: Sun Microsystems, Inc. ERI Ethernet (rev. 0x01)
gem0: interrupting at ivec 3006
gem0: Ethernet address 00:03:ba:ab:cd:ef, 2KB RX fifo, 2KB TX fifo
ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0008bb, model 0x0002, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fwohci0 at pci0 dev 12 function 2: Sun Microsystems, Inc. FireWire controller (rev. 0x01)
interrupt_vector: spurious vector 7de at pil 15
fwohci0: interrupting at ivec 1c
fwohci0: OHCI 1.0, 00:03:ba:01:23:45:67:89, 400Mb/s, 2048 max_rec, 4 ir_ctx, 4 it_ctx
ohci0 at pci0 dev 12 function 3: Sun Microsystems, Inc. USB controller (rev. 0x01)
ohci0: interrupting at ivec 24
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Sun Microsystem OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
Acer Labs M7101 Power Management Controller (miscellaneous prehistoric) at pci0 dev 3 function 0 not configured
autri0 at pci0 dev 8 function 0: Acer Labs M5451 AC-Link Controller Audio Device (rev. 0x01)
autri0: interrupting at ivec 23
autri0: ac97: Analog Devices AD1881A codec; headphone, Analog Devices Phat Stereo
audio0 at autri0: full duplex, mmap, independent
aceride0 at pci0 dev 13 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
aceride0: bus-master DMA support present
aceride0: primary channel configured to native-PCI mode
aceride0: using ivec 180c for native-PCI interrupt
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to native-PCI mode
atabus1 at aceride0 channel 1
ATI Technologies Rage XL (VGA display, revision 0x27) at pci0 dev 19 function 0 not configured
ppb0 at pci0 dev 5 function 0: Digital Equipment DECchip 21152 PCI-PCI Bridge (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ex0 at pci1 dev 2 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x78)
ex0: interrupting at ivec 15
ex0: MAC address 00:0a:5e:ab:cd:ef
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcons at mainbus0 not configured
No counter-timer -- using %tick at 502MHz as system clock.
Kernelized RAIDframe activated
md0: internal 5120 KB image area
fw0 at fwohci0: 00:03:ba:01:23:45:67:89:ab:cd:ef:01:23:45:67:89
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <LTN486S, , YSU1> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0 at atabus0 drive 0: <HDS722580VLAT20>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 78533 MB, 159560 cyl, 16 head, 63 sec, 512 bytes/sect x 160836480 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA data transfers)
cd0(aceride0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
root on md0a dumps on md0b
WARNING: clock gained 3 days -- CHECK AND RESET THE DATE!
root file system type: ffs
erase ^?, werase ^W, kill ^U, intr ^C

If you are using a SUN type 4 keyboard, please enter "sun-type4".
Terminal type (just hit ENTER for 'sun'):