Re: Continuing problems with Dell PE 1550.

[Lars-Johan Liman <liman%autonomica.se@localhost>]

Ah!

I managed to pick up the entire boot sequence that fails. I hope it
helps ...



  Booting 'Xen 2.0 / NetBSD (hda0, serial)'                                     
                                                                                
kernel (hd0,a)/xen.gz dom0_mem=262144 com1=9600,8n1                             
   [Multiboot-elf, <0x100000:0x3f080:0x35f80>, shtab=0x175078, entry=0x100000]  
module (hd0,a)/netbsd root=/dev/hda1 ro console=ttyS0                           
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
         o      a     .                                                         
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                          __  __            ____
    ___  _____                                                                  
 \ \/ /___ _ __   |___ \  / _ \|___  |                                          
  \  // _ \ '_ \    __) || | | |  / /                                           
  /  \  __/ | | |  / __/ | |_| | / /                                            
 /_/\_\___|_| |_| |_____(_)___(_)_/                                             
                                      
 http://www.cl.cam.ac.uk/netos/xen
 University of Cambridge Computer Laboratory

 Xen version 2.0.7 (xenod%cl.cam.ac.uk@localhost) (gcc version 3.3.3 20040412 
(Red Hat Lin
ux 3.3.3-7)) Thu Aug  4 00:37:06 BST 2005
 Latest ChangeSet: Thu Aug  4 00:24:27 2005 973a2d3c7a63c17d318332b65cb3fc5f8d10
4cd3

(XEN) Physical RAM map:
(XEN)  0000000000000000 - 00000000000a0000 (usable)
(XEN)  0000000000100000 - 000000003fff0000 (usable)
(XEN)  000000003fff0000 - 000000003fffec00 (ACPI data)
(XEN)  000000003fffec00 - 000000003ffff000 (reserved)
(XEN)  00000000fec00000 - 00000000fec20000 (reserved)
(XEN)  00000000fee00000 - 00000000fee20000 (reserved)
(XEN)  00000000fff80000 - 0000000100000000 (reserved)
(XEN) System RAM: 1023MB (1048128kB)
(XEN) Xen heap: 10MB (10764kB)
(XEN) CPU0: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0
(XEN) CPU caps: 0387fbff 00000000 00000000 00000000
(XEN) found SMP MP-table at 000fe710
(XEN) ACPI: RSDP (v000 DELL                                      ) @ 0x000fdcd0
(XEN) ACPI: RSDT (v001 DELL   PA1550   0x00000001 MSFT 0x0100000a) @ 0x000fdce4
(XEN) ACPI: FADT (v001 DELL   PA1550   0x00000001 MSFT 0x0100000a) @ 0x000fdd10
(XEN) ACPI: MADT (v001 DELL   PA1550   0x00000001 MSFT 0x0100000a) @ 0x000fdd84
(XEN) ACPI: DSDT (v001 DELL   PA1550   0x00000001 MSFT 0x0100000a) @ 0x00000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 Pentium(tm) Pro APIC version 17
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) Using ACPI for processor (LAPIC) configuration information
(XEN) Intel MultiProcessor Specification v1.4
(XEN)     Virtual Wire compatibility mode.
(XEN) OEM ID: DELL     Product ID: POWEREDGE DF APIC at: 0xFEE00000
(XEN) I/O APIC #1 Version 17 at 0xFEC00000.
(XEN) I/O APIC #2 Version 17 at 0xFEC01000.
(XEN) Enabling APIC mode: Flat. Using 2 I/O APICs
(XEN) Processors: 1
(XEN) Using scheduler: Borrowed Virtual Time (bvt)
(XEN) Initializing CPU#0
(XEN) Detected 997.518 MHz processor.
(XEN) CPU0: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0
(XEN) CPU caps: 0387fbff 00000000 00000000 00000000
(XEN) CPU0 booted
(XEN) enabled ExtINT on CPU#0
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) Error: only one processor found.
(XEN) ENABLING IO-APIC IRQs
(XEN) Setting 1 in the phys_id_present_map
(XEN) ...changing IO-APIC physical APIC ID to 1 ... ok.
(XEN) Setting 2 in the phys_id_present_map
(XEN) ...changing IO-APIC physical APIC ID to 2 ... ok.
(XEN) init IO_APIC IRQs
(XEN) ..TIMER: vector=0x41 pin1=2 pin2=0
(XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
(XEN) ...trying to set up timer (IRQ0) through the 8259A ... 
(XEN) ..... (found pin 0) ...works.
(XEN) Using local APIC timer interrupts.
(XEN) Calibrating APIC timer for CPU0...
(XEN) ..... CPU speed is 997.4670 MHz.
(XEN) ..... Bus speed is 132.9954 MHz.
(XEN) ..... bus_scale = 0x00008830
(XEN) Time init:
(XEN) .... System Time: 20000310ns
(XEN) .... cpu_freq:    00000000:3B74EC54
(XEN) .... scale:       00000001:00A30994
(XEN) .... Wall Clock:  1144922431s 180000us
(XEN) PCI: PCI BIOS revision 2.10 entry at 0xfcb7e, last bus=4
(XEN) PCI: Using configuration type 1
(XEN) PCI: Probing PCI hardware
(XEN) PCI: Probing PCI hardware (bus 00)
(XEN) PCI: Discovered primary peer bus 01 [IRQ]
(XEN) PCI: Discovered primary peer bus 04 [IRQ]
(XEN) PCI: Using IRQ router ServerWorks [1166/0200] at 00:0f.0
(XEN) PCI->APIC IRQ transform: (B0,I1,P0) -> 16
(XEN) PCI->APIC IRQ transform: (B2,I1,P0) -> 26
(XEN) PCI->APIC IRQ transform: (B3,I0,P0) -> 25
(XEN) mtrr: v2.0 (20020519)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found: 'GUEST_OS=netbsd,GUEST_VER=2.0,XEN_VER=2.0,LOADER=ge
neric,BSD_SYMTAB'
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Kernel image:  00c00000->011d4380
(XEN)  Initrd image:  00000000->00000000
(XEN)  Dom0 alloc.:   01400000->11400000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: c0100000->c067a140
(XEN)  Init. ramdisk: c0705000->c0705000
(XEN)  Phys-Mach map: c0705000->c0745000
(XEN)  Page tables:   c0745000->c0748000
(XEN)  Start info:    c0748000->c0749000
(XEN)  Boot stack:    c0749000->c074a000
(XEN)  TOTAL:         c0100000->c0800000
(XEN)  ENTRY ADDRESS: c0100000
(XEN) Scrubbing DOM0 RAM: ...done.
(XEN) Scrubbing Free RAM: ...........done.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen
).
pmap_mem_end find: old update failed 00000000
Loaded initial symtab at 0xc067a144, strtab at 0xc06c1908, # entries 18231
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.0 (XEN0) #0: Mon Dec 19 01:27:58 UTC 2005
        
builds%works.netbsd.org@localhost:/home/builds/ab/netbsd-3-0-RELEASE/i386/20051218
2024Z-obj/home/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/i386/compile/XEN0
total memory = 249 MB
avail memory = 244 MB
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 997.52 MHz, id 0x68a
cpu0: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 387fbff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
cpu0: features 387fbff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: serial number 0000-068A-0000-383D-F46B-54F6
cpu0: 8 page colors
hypervisor0 at mainbus0
debug virtual interrupt using event channel 1
misdirect virtual interrupt using event channel 0
Domain controller: using event channel 2
xencons0 at hypervisor0: Xen Virtual Console Driver
xencons0: console major 143, unit 0
xencons0: using event channel 4
npx0 at hypervisor0: using exception 16
PCI_PROBE_ROOT_BUSES: 0xf 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
pci0 at hypervisor0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: ServerWorks CNB20-HE PCI bridge (rev. 0x23)
pchb1 at pci0 dev 0 function 1
pchb1: ServerWorks CNB20-HE PCI bridge (rev. 0x01)
pchb2 at pci0 dev 0 function 2
pchb2: ServerWorks CNB30-LE PCI bridge (rev. 0x01)
pci1 at pchb2 bus 1
pci1: i/o space, memory space enabled
ppb0 at pci1 dev 4 function 0: Digital Equipment DC21154 PCI-PCI Bridge (rev. 0x
05)
pci at ppb0 bus 2 not configured
pchb3 at pci0 dev 0 function 3
pchb3: ServerWorks CNB30-LE PCI bridge (rev. 0x01)
pci2 at pchb3 bus 4
pci2: i/o space, memory space enabled
fxp0 at pci0 dev 1 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 16, event channel 5
fxp0: Ethernet address 00:06:5b:38:4e:5c
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga0 at pci0 dev 3 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 0-3 added (80x25, vt100 emulation)
pcib0 at pci0 dev 15 function 0
pcib0: ServerWorks OSB4 southbridge (rev. 0x50)
rccide0 at pci0 dev 15 function 1
rccide0: ServerWorks OSB4 IDE Controller (rev. 0x00)
rccide0: bus-master DMA support present
rccide0: primary channel configured to compatibility mode
rccide0: primary channel using event channel 6 for irq 14
atabus0 at rccide0 channel 0
rccide0: secondary channel configured to compatibility mode
rccide0: secondary channel using event channel 7 for irq 15
atabus1 at rccide0 channel 1
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
bus 1 already attached
pci3 at hypervisor0 bus 2
pci3: i/o space, memory space enabled
ppb1 at pci3 dev 0 function 0: Digital Equipment DC21154 PCI-PCI Bridge (rev. 0x
05)
pci at ppb1 bus 3 not configured
Q Logic product 0x1216 (SCSI mass storage, revision 0x06) at pci3 dev 1 function
 0 not configured
pci4 at hypervisor0 bus 3
pci4: i/o space, memory space enabled
American Megatrends MegaRAID 3 (RAID mass storage, revision 0x20) at pci4 dev 0 
function 0 not configured
Xen clock: using event channel 10
raidattach: Asked for 8 units
Kernelized RAIDframe activated
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <SAMSUNG CD-ROM SN-124, , q009> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(rccide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (usi
ng DMA)
Searching for RAID components...
boot device: <unknown>
root device: