Re: Xen3 domain0 support is there !

[Florian Heigl <floh%deranfangvomen.de@localhost>]

On Mon, Jul 03, 2006 at 08:37:25PM +0200, Manuel Bouyer wrote:
> On Mon, Jul 03, 2006 at 01:13:56PM -0500, Jonathan A. Kollasch wrote:
> > On Mon, Jul 03, 2006 at 12:05:54AM +0200, Manuel Bouyer wrote:
> > 
> > [snip]
> > 
> > It booted almost fine on a dual Pentium Pro box I have, with the exception
> > that the tlp card (which is sharing an interrupt with a uhci) errors about
> > "filter setup and transmit timeout", probably an interrupt issue.

from experience: don't rely on irq sharing whereever an adaptec 7xxx or dec
214xx chip is involved. instead remove the hardware in question and throw it
away as far as You can. Works best at Niagara falls, etc.

Really, change for an Intel or 3com adapter, and turn off apic, remove all irq
conflicts, then turn apic back on.
 
> Yes the problems on SMP boxes are interrupt issues.

they are here to remind us that no matter what we achieve - in the end it will
still be a PC with too little interrupt lines and a not smp-ready timer.

Florian (depressed)


-- 

florian heigl                    http://deranfangvomen.de/

Grid Computing erfreut sich gerade bei Windows-Nutzern sehr regem Zuspruch, auch
wenn die Rechnerbesitzer meist nichts von ihrem Glück wissen. --f. weimer