Re: NetBSD-Current/XEN3 : XM CREATE problem

[KlinT <klint%klintcentral.net@localhost>]

Well,

I've made some tests and read some documentation .... :D

I forgot to start xenbackend daemon :D This solve the error I've  
posted before without using "0x03" :

==> xbdback: can' read backend/vbd/1/3/handle: 79

But the "xm create" still not work ... :(

==> Error: Device 0 (vif) could not be connected. Hotplug scripts not

Any idea ?

Do I need a ifconfig.bridge0 like in xen 2.0.7 ?

Is there any parameters to setup in xend-config.sxp ?

Many thanks ...

Arnaud

Le 16 juil. 06 à 10:50, KlinT a écrit :

> Le 16 juil. 06 à 10:40, Juan RP a écrit :
>
> > On Sun, 16 Jul 2006 10:23:42 +0200
> > KlinT <klint%klintcentral.net@localhost> wrote:
> >
> > [...]
> >
> > > xm create -c ./test
> > > Using config file "./test".
> > > Error: Device 0 (vif) could not be connected. Hotplug scripts not
> > > working.
> > >
> > > Here is my config file :
> > >
> > > kernel = "/root/netbsd-INSTALL_XEN3_DOMU"
> > > # kernel = "/root/netbsd-XEN3_DOMU"
> > > memory = 128
> > > name = "test"
> > > cpus = ""
> > > vif = [ 'bridge=bridge0' ]
> > > disk = [ 'phy:/dev/wd0h,wd0d,w' ]
> > > root = "/dev/wd0d ro"
> >
> > I read through the archives and looks like you need to change wd0d
> > to 0x03.
>
> Yeah, this solve a part of my problem ...
>
> xm create -c ./test
> Using config file "./test".
> Error: Device 0 (vif) could not be connected. Hotplug scripts not  
> working.
>
> Same error :D
>
> But, this solves the following error :
>
> xbdback: can' read backend/vbd/1/3/handle: 79
>
> Maybe I missed the VIF/Bridge configuration
>
> many thanks
>
> Best regards
>
> arnaud.