Re: Inner and outer Networks on Xen 3.0.3

[Anzi <anzi%dnainternet.net@localhost>]

Thanks for your fast response!

I think I tried that but apparently I did something wrong when 
configuring networks on dom0/domU. Now that I know it works I'll give it 
an another try!

My configuration should look like this:

dom0:
ex0 (connected externally) - no IP address
bce0 (connected internally) - 192.168.x.x

domU 1:
eth0 (bridged with ex0) - external IP address #1

-Anzi-


Stephen Borrill wrote:

> On Wed, 15 Nov 2006, Anzi wrote:
>
> > What is the best way to use xen so that dom0 (netbsd3.1) machine has 
> > several network cards and only on "managent interface". I mean that 
> > DomU:s may be on the dmz zone and dom0 is on the internal network? I 
> > think that it is possible with exporting nics as pci devices but is 
> > this operational yet?
> >
> > Anybody has has better ideas?
> >
> > I currently assigned and public-ip address for DOM0 and DOMU and used 
> > standard network-bridge vif. This has the downside that dom0 is then 
> > also publicly available (they are behind firewall).
>
>
> You don't need to give your dom0 external interface an address.
>
> For example, I have:
>
> dom0:
> fxp0 (connected externally) - no IP address
> wm0 (connected internally) - 192.168.1.11
>
> domU 1:
> xennet0 (bridged with wm0) - 192.168.1.12
> xennet1 (bridged with fxp0) - external IP address #1
>
> domU 2:
> xennet0 (bridged with wm0) - 192.168.1.13
> xennet1 (bridged with fxp0) - external IP address #2
>
> Or have I misunderstood your requirements?